From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 1/2] regulator: Make virtual consumer use dev_printk
Date: Wed, 17 Jun 2009 15:45:06 +0100 [thread overview]
Message-ID: <1245249907-5240-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/regulator/virtual.c | 34 ++++++++++++++++++----------------
1 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index e953c18..5c1d756 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -27,17 +27,18 @@ struct virtual_consumer_data {
unsigned int mode;
};
-static void update_voltage_constraints(struct virtual_consumer_data *data)
+static void update_voltage_constraints(struct device *dev,
+ struct virtual_consumer_data *data)
{
int ret;
if (data->min_uV && data->max_uV
&& data->min_uV <= data->max_uV) {
ret = regulator_set_voltage(data->regulator,
- data->min_uV, data->max_uV);
+ data->min_uV, data->max_uV);
if (ret != 0) {
- printk(KERN_ERR "regulator_set_voltage() failed: %d\n",
- ret);
+ dev_err(dev,
+ "regulator_set_voltage() failed: %d\n", ret);
return;
}
}
@@ -47,7 +48,7 @@ static void update_voltage_constraints(struct virtual_consumer_data *data)
if (ret == 0)
data->enabled = 1;
else
- printk(KERN_ERR "regulator_enable() failed: %d\n",
+ dev_err(dev, "regulator_enable() failed: %d\n",
ret);
}
@@ -56,13 +57,13 @@ static void update_voltage_constraints(struct virtual_consumer_data *data)
if (ret == 0)
data->enabled = 0;
else
- printk(KERN_ERR "regulator_disable() failed: %d\n",
+ dev_err(dev, "regulator_disable() failed: %d\n",
ret);
}
}
-static void update_current_limit_constraints(struct virtual_consumer_data
- *data)
+static void update_current_limit_constraints(struct device *dev,
+ struct virtual_consumer_data *data)
{
int ret;
@@ -71,8 +72,9 @@ static void update_current_limit_constraints(struct virtual_consumer_data
ret = regulator_set_current_limit(data->regulator,
data->min_uA, data->max_uA);
if (ret != 0) {
- pr_err("regulator_set_current_limit() failed: %d\n",
- ret);
+ dev_err(dev,
+ "regulator_set_current_limit() failed: %d\n",
+ ret);
return;
}
}
@@ -82,7 +84,7 @@ static void update_current_limit_constraints(struct virtual_consumer_data
if (ret == 0)
data->enabled = 1;
else
- printk(KERN_ERR "regulator_enable() failed: %d\n",
+ dev_err(dev, "regulator_enable() failed: %d\n",
ret);
}
@@ -91,7 +93,7 @@ static void update_current_limit_constraints(struct virtual_consumer_data
if (ret == 0)
data->enabled = 0;
else
- printk(KERN_ERR "regulator_disable() failed: %d\n",
+ dev_err(dev, "regulator_disable() failed: %d\n",
ret);
}
}
@@ -115,7 +117,7 @@ static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);
data->min_uV = val;
- update_voltage_constraints(data);
+ update_voltage_constraints(dev, data);
mutex_unlock(&data->lock);
@@ -141,7 +143,7 @@ static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);
data->max_uV = val;
- update_voltage_constraints(data);
+ update_voltage_constraints(dev, data);
mutex_unlock(&data->lock);
@@ -167,7 +169,7 @@ static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);
data->min_uA = val;
- update_current_limit_constraints(data);
+ update_current_limit_constraints(dev, data);
mutex_unlock(&data->lock);
@@ -193,7 +195,7 @@ static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);
data->max_uA = val;
- update_current_limit_constraints(data);
+ update_current_limit_constraints(dev, data);
mutex_unlock(&data->lock);
--
1.6.3.1
next reply other threads:[~2009-06-17 14:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-17 14:45 Mark Brown [this message]
2009-06-17 14:45 ` [PATCH 2/2] regulator: Make virtual consumer a bit more chatty Mark Brown
2009-06-18 10:46 ` Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1245249907-5240-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®