* [PATCH 1/2] regulator: Make virtual consumer use dev_printk
@ 2009-06-17 14:45 Mark Brown
2009-06-17 14:45 ` [PATCH 2/2] regulator: Make virtual consumer a bit more chatty Mark Brown
0 siblings, 1 reply; 3+ messages in thread
From: Mark Brown @ 2009-06-17 14:45 UTC (permalink / raw)
To: Liam Girdwood; +Cc: linux-kernel, Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/regulator/virtual.c | 34 ++++++++++++++++++----------------
1 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index e953c18..5c1d756 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -27,17 +27,18 @@ struct virtual_consumer_data {
unsigned int mode;
};
-static void update_voltage_constraints(struct virtual_consumer_data *data)
+static void update_voltage_constraints(struct device *dev,
+ struct virtual_consumer_data *data)
{
int ret;
if (data->min_uV && data->max_uV
&& data->min_uV <= data->max_uV) {
ret = regulator_set_voltage(data->regulator,
- data->min_uV, data->max_uV);
+ data->min_uV, data->max_uV);
if (ret != 0) {
- printk(KERN_ERR "regulator_set_voltage() failed: %d\n",
- ret);
+ dev_err(dev,
+ "regulator_set_voltage() failed: %d\n", ret);
return;
}
}
@@ -47,7 +48,7 @@ static void update_voltage_constraints(struct virtual_consumer_data *data)
if (ret == 0)
data->enabled = 1;
else
- printk(KERN_ERR "regulator_enable() failed: %d\n",
+ dev_err(dev, "regulator_enable() failed: %d\n",
ret);
}
@@ -56,13 +57,13 @@ static void update_voltage_constraints(struct virtual_consumer_data *data)
if (ret == 0)
data->enabled = 0;
else
- printk(KERN_ERR "regulator_disable() failed: %d\n",
+ dev_err(dev, "regulator_disable() failed: %d\n",
ret);
}
}
-static void update_current_limit_constraints(struct virtual_consumer_data
- *data)
+static void update_current_limit_constraints(struct device *dev,
+ struct virtual_consumer_data *data)
{
int ret;
@@ -71,8 +72,9 @@ static void update_current_limit_constraints(struct virtual_consumer_data
ret = regulator_set_current_limit(data->regulator,
data->min_uA, data->max_uA);
if (ret != 0) {
- pr_err("regulator_set_current_limit() failed: %d\n",
- ret);
+ dev_err(dev,
+ "regulator_set_current_limit() failed: %d\n",
+ ret);
return;
}
}
@@ -82,7 +84,7 @@ static void update_current_limit_constraints(struct virtual_consumer_data
if (ret == 0)
data->enabled = 1;
else
- printk(KERN_ERR "regulator_enable() failed: %d\n",
+ dev_err(dev, "regulator_enable() failed: %d\n",
ret);
}
@@ -91,7 +93,7 @@ static void update_current_limit_constraints(struct virtual_consumer_data
if (ret == 0)
data->enabled = 0;
else
- printk(KERN_ERR "regulator_disable() failed: %d\n",
+ dev_err(dev, "regulator_disable() failed: %d\n",
ret);
}
}
@@ -115,7 +117,7 @@ static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);
data->min_uV = val;
- update_voltage_constraints(data);
+ update_voltage_constraints(dev, data);
mutex_unlock(&data->lock);
@@ -141,7 +143,7 @@ static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);
data->max_uV = val;
- update_voltage_constraints(data);
+ update_voltage_constraints(dev, data);
mutex_unlock(&data->lock);
@@ -167,7 +169,7 @@ static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);
data->min_uA = val;
- update_current_limit_constraints(data);
+ update_current_limit_constraints(dev, data);
mutex_unlock(&data->lock);
@@ -193,7 +195,7 @@ static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->lock);
data->max_uA = val;
- update_current_limit_constraints(data);
+ update_current_limit_constraints(dev, data);
mutex_unlock(&data->lock);
--
1.6.3.1
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH 2/2] regulator: Make virtual consumer a bit more chatty
2009-06-17 14:45 [PATCH 1/2] regulator: Make virtual consumer use dev_printk Mark Brown
@ 2009-06-17 14:45 ` Mark Brown
2009-06-18 10:46 ` Liam Girdwood
0 siblings, 1 reply; 3+ messages in thread
From: Mark Brown @ 2009-06-17 14:45 UTC (permalink / raw)
To: Liam Girdwood; +Cc: linux-kernel, Mark Brown
This makes it easier to read the logs when doing testing.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/regulator/virtual.c | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c
index 5c1d756..1441107 100644
--- a/drivers/regulator/virtual.c
+++ b/drivers/regulator/virtual.c
@@ -34,6 +34,8 @@ static void update_voltage_constraints(struct device *dev,
if (data->min_uV && data->max_uV
&& data->min_uV <= data->max_uV) {
+ dev_dbg(dev, "Requesting %d-%duV\n",
+ data->min_uV, data->max_uV);
ret = regulator_set_voltage(data->regulator,
data->min_uV, data->max_uV);
if (ret != 0) {
@@ -44,6 +46,7 @@ static void update_voltage_constraints(struct device *dev,
}
if (data->min_uV && data->max_uV && !data->enabled) {
+ dev_dbg(dev, "Enabling regulator\n");
ret = regulator_enable(data->regulator);
if (ret == 0)
data->enabled = 1;
@@ -53,6 +56,7 @@ static void update_voltage_constraints(struct device *dev,
}
if (!(data->min_uV && data->max_uV) && data->enabled) {
+ dev_dbg(dev, "Disabling regulator\n");
ret = regulator_disable(data->regulator);
if (ret == 0)
data->enabled = 0;
@@ -69,6 +73,8 @@ static void update_current_limit_constraints(struct device *dev,
if (data->max_uA
&& data->min_uA <= data->max_uA) {
+ dev_dbg(dev, "Requesting %d-%duA\n",
+ data->min_uA, data->max_uA);
ret = regulator_set_current_limit(data->regulator,
data->min_uA, data->max_uA);
if (ret != 0) {
@@ -80,6 +86,7 @@ static void update_current_limit_constraints(struct device *dev,
}
if (data->max_uA && !data->enabled) {
+ dev_dbg(dev, "Enabling regulator\n");
ret = regulator_enable(data->regulator);
if (ret == 0)
data->enabled = 1;
@@ -89,6 +96,7 @@ static void update_current_limit_constraints(struct device *dev,
}
if (!(data->min_uA && data->max_uA) && data->enabled) {
+ dev_dbg(dev, "Disabling regulator\n");
ret = regulator_disable(data->regulator);
if (ret == 0)
data->enabled = 0;
--
1.6.3.1
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-06-18 10:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-06-17 14:45 [PATCH 1/2] regulator: Make virtual consumer use dev_printk Mark Brown
2009-06-17 14:45 ` [PATCH 2/2] regulator: Make virtual consumer a bit more chatty Mark Brown
2009-06-18 10:46 ` Liam Girdwood
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®