From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: avictor.za@gmail.com, linux-arm-kernel@lists.arm.linux.org.uk
Cc: patrice.vilchez@atmel.com, linux-kernel@vger.kernel.org,
Hong Xu <hong.xu@atmel.com>
Subject: [PATCH 1/5] at91: Basic support for at91sam9g10: header files
Date: Thu, 18 Jun 2009 18:16:08 +0200 [thread overview]
Message-ID: <1245341772-1689-2-git-send-email-nicolas.ferre@atmel.com> (raw)
In-Reply-To: <1245341772-1689-1-git-send-email-nicolas.ferre@atmel.com>
From: Hong Xu <hong.xu@atmel.com>
AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.
Here is the basic header file support for this product.
Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/mach-at91/include/mach/at91sam9261.h | 3 +++
arch/arm/mach-at91/include/mach/cpu.h | 7 +++++++
arch/arm/mach-at91/include/mach/hardware.h | 2 +-
arch/arm/mach-at91/include/mach/timex.h | 5 +++++
4 files changed, 16 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 3a348ca..87de8be 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -95,6 +95,9 @@
#define AT91SAM9261_SRAM_BASE 0x00300000 /* Internal SRAM base address */
#define AT91SAM9261_SRAM_SIZE 0x00028000 /* Internal SRAM size (160Kb) */
+#define AT91SAM9G10_SRAM_BASE AT91SAM9261_SRAM_BASE /* Internal SRAM base address */
+#define AT91SAM9G10_SRAM_SIZE 0x00004000 /* Internal SRAM size (16Kb) */
+
#define AT91SAM9261_ROM_BASE 0x00400000 /* Internal ROM base address */
#define AT91SAM9261_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index b73e7bf..34a9502 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,6 +21,7 @@
#define ARCH_ID_AT91SAM9260 0x019803a0
#define ARCH_ID_AT91SAM9261 0x019703a0
#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9G10 0x819903a0
#define ARCH_ID_AT91SAM9G20 0x019905a0
#define ARCH_ID_AT91SAM9RL64 0x019b03a0
#define ARCH_ID_AT91SAM9G45 0x819b05a0
@@ -97,6 +98,12 @@ static inline unsigned long at91cap9_rev_identify(void)
#define cpu_is_at91sam9261() (0)
#endif
+#ifdef CONFIG_ARCH_AT91SAM9G10
+#define cpu_is_at91sam9g10() (at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#else
+#define cpu_is_at91sam9g10() (0)
+#endif
+
#ifdef CONFIG_ARCH_AT91SAM9263
#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
#else
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index f086917..a0df8b0 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -20,7 +20,7 @@
#include <mach/at91rm9200.h>
#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
#include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
#include <mach/at91sam9261.h>
#elif defined(CONFIG_ARCH_AT91SAM9263)
#include <mach/at91sam9263.h>
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 38f6c42..31ac2d9 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -42,6 +42,11 @@
#define AT91SAM9_MASTER_CLOCK 99300000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9G10)
+
+#define AT91SAM9_MASTER_CLOCK 133000000
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91SAM9263)
#if defined(CONFIG_MACH_USB_A9263)
--
1.5.3.7
next prev parent reply other threads:[~2009-06-18 15:12 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-18 16:16 [PATCH 0/5] at91: Introduction of at91sam9g10 SOC Nicolas Ferre
2009-06-18 16:16 ` Nicolas Ferre [this message]
2009-06-18 16:16 ` [PATCH 2/5] at91: Support for at91sam9g10: clocks management Nicolas Ferre
2009-06-18 16:16 ` [PATCH 3/5] at91: Support for at91sam9g10: core chip & board support Nicolas Ferre
2009-06-18 22:28 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-18 16:16 ` [PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10 Nicolas Ferre
2009-09-16 11:59 ` Nicolas Ferre
2009-09-25 10:24 ` Nicolas Ferre
2009-09-25 17:51 ` David Brownell
2009-09-29 7:59 ` Nicolas Ferre
2009-09-29 17:40 ` Greg KH
2009-10-20 13:01 ` Nicolas Ferre
2009-06-18 16:16 ` [PATCH 5/5] at91/atmel_lcdfb: add at91sam9g10 support to atmel LCD driver Nicolas Ferre
2009-06-18 22:24 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-23 13:20 ` Nicolas Ferre
2009-06-23 14:30 ` [RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line Nicolas Ferre
2009-06-23 13:35 ` Haavard Skinnemoen
2009-06-23 14:12 ` Nicolas Ferre
2009-06-25 8:46 ` Russell King - ARM Linux
2009-11-03 14:42 ` Nicolas Ferre
2009-11-03 21:05 ` Russell King - ARM Linux
2009-11-13 15:27 ` Nicolas Ferre
2009-06-23 14:13 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-06 10:32 ` [PATCH 5/5] at91/atmel_lcdfb: add at91sam9g10 support to atmel LCD driver Nicolas Ferre
2009-07-20 22:24 ` Andrew Morton
2009-07-21 9:31 ` Nicolas Ferre
2009-06-25 22:00 ` [PATCH 0/5] at91: Introduction of at91sam9g10 SOC Andrew Victor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1245341772-1689-2-git-send-email-nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=avictor.za@gmail.com \
--cc=hong.xu@atmel.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=patrice.vilchez@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®