From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: avictor.za@gmail.com, linux-arm-kernel@lists.arm.linux.org.uk
Cc: patrice.vilchez@atmel.com, linux-kernel@vger.kernel.org,
Hong Xu <hong.xu@atmel.com>
Subject: [PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10
Date: Thu, 18 Jun 2009 18:16:11 +0200 [thread overview]
Message-ID: <1245341772-1689-5-git-send-email-nicolas.ferre@atmel.com> (raw)
In-Reply-To: <1245341772-1689-1-git-send-email-nicolas.ferre@atmel.com>
From: Hong Xu <hong.xu@atmel.com>
Modify both host and gadget USB drivers for at91sam9g10.
This add a clock management equivalent to at91sam9261 on usb drivers.
It also add the way of handling gadget pull-ups (like the at91sam9261).
Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
drivers/usb/gadget/at91_udc.c | 6 +++---
drivers/usb/host/ohci-at91.c | 10 +++++-----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 0b2bb8f..bfed3d9 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -892,7 +892,7 @@ static void pullup(struct at91_udc *udc, int is_on)
txvc |= AT91_UDP_TXVC_PUON;
at91_udp_write(udc, AT91_UDP_TXVC, txvc);
- } else if (cpu_is_at91sam9261()) {
+ } else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
u32 usbpucr;
usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
@@ -910,7 +910,7 @@ static void pullup(struct at91_udc *udc, int is_on)
txvc &= ~AT91_UDP_TXVC_PUON;
at91_udp_write(udc, AT91_UDP_TXVC, txvc);
- } else if (cpu_is_at91sam9261()) {
+ } else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
u32 usbpucr;
usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
@@ -1692,7 +1692,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
udc->ep[3].maxpacket = 64;
udc->ep[4].maxpacket = 512;
udc->ep[5].maxpacket = 512;
- } else if (cpu_is_at91sam9261()) {
+ } else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
udc->ep[3].maxpacket = 64;
} else if (cpu_is_at91sam9263()) {
udc->ep[0].maxpacket = 64;
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index b29b0fe..fb64def 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -35,7 +35,7 @@ extern int usb_disabled(void);
static void at91_start_clock(void)
{
- if (cpu_is_at91sam9261())
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
clk_enable(hclk);
clk_enable(iclk);
clk_enable(fclk);
@@ -46,7 +46,7 @@ static void at91_stop_clock(void)
{
clk_disable(fclk);
clk_disable(iclk);
- if (cpu_is_at91sam9261())
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
clk_disable(hclk);
clocked = 0;
}
@@ -142,7 +142,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
iclk = clk_get(&pdev->dev, "ohci_clk");
fclk = clk_get(&pdev->dev, "uhpck");
- if (cpu_is_at91sam9261())
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
hclk = clk_get(&pdev->dev, "hck0");
at91_start_hc(pdev);
@@ -156,7 +156,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
/* Error handling */
at91_stop_hc(pdev);
- if (cpu_is_at91sam9261())
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
clk_put(hclk);
clk_put(fclk);
clk_put(iclk);
@@ -193,7 +193,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- if (cpu_is_at91sam9261())
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
clk_put(hclk);
clk_put(fclk);
clk_put(iclk);
--
1.5.3.7
next prev parent reply other threads:[~2009-06-18 15:13 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-18 16:16 [PATCH 0/5] at91: Introduction of at91sam9g10 SOC Nicolas Ferre
2009-06-18 16:16 ` [PATCH 1/5] at91: Basic support for at91sam9g10: header files Nicolas Ferre
2009-06-18 16:16 ` [PATCH 2/5] at91: Support for at91sam9g10: clocks management Nicolas Ferre
2009-06-18 16:16 ` [PATCH 3/5] at91: Support for at91sam9g10: core chip & board support Nicolas Ferre
2009-06-18 22:28 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-18 16:16 ` Nicolas Ferre [this message]
2009-09-16 11:59 ` [PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10 Nicolas Ferre
2009-09-25 10:24 ` Nicolas Ferre
2009-09-25 17:51 ` David Brownell
2009-09-29 7:59 ` Nicolas Ferre
2009-09-29 17:40 ` Greg KH
2009-10-20 13:01 ` Nicolas Ferre
2009-06-18 16:16 ` [PATCH 5/5] at91/atmel_lcdfb: add at91sam9g10 support to atmel LCD driver Nicolas Ferre
2009-06-18 22:24 ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-23 13:20 ` Nicolas Ferre
2009-06-23 14:30 ` [RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line Nicolas Ferre
2009-06-23 13:35 ` Haavard Skinnemoen
2009-06-23 14:12 ` Nicolas Ferre
2009-06-25 8:46 ` Russell King - ARM Linux
2009-11-03 14:42 ` Nicolas Ferre
2009-11-03 21:05 ` Russell King - ARM Linux
2009-11-13 15:27 ` Nicolas Ferre
2009-06-23 14:13 ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-06 10:32 ` [PATCH 5/5] at91/atmel_lcdfb: add at91sam9g10 support to atmel LCD driver Nicolas Ferre
2009-07-20 22:24 ` Andrew Morton
2009-07-21 9:31 ` Nicolas Ferre
2009-06-25 22:00 ` [PATCH 0/5] at91: Introduction of at91sam9g10 SOC Andrew Victor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1245341772-1689-5-git-send-email-nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=avictor.za@gmail.com \
--cc=hong.xu@atmel.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=patrice.vilchez@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®