* [PATCH 0/2] [Target_Core_Mod/Persistent_Reservations]: Add SPEC_I_PT=1 support
@ 2009-08-09 4:56 Nicholas A. Bellinger
0 siblings, 0 replies; only message in thread
From: Nicholas A. Bellinger @ 2009-08-09 4:56 UTC (permalink / raw)
To: LKML, linux-scsi
Cc: Douglas Gilbert, Hannes Reinecke, FUJITA Tomonori, Mike Christie,
James Bottomley, Andrew Morton, James Smart, Philipp Reisner
Hello again SCSI folks,
Attached are two patches for implementing the Specify Initiator Port Capable (SPEC_I_PT=1)
feature bit for handling of fabric dependent TransportIDs with PROUT service action REGISTER.
This is done by walking the PROUT parameter list, and calling fabric module dependent code for
extracting the TransportIDs and lengths, and then doing a second loop performing atomic adding
of pre-registered registrations for the fabric Initiator Ports referenced by TransportIDs.
This has been been tested with TCM/IBLOCK with fabric LIO-Target ports on v2.6.31-rc5 x86
32-bit KVM, please have a look at Patch 1 for an example using sg_persist + SPEC_I_PT=1 with
this code.
--nab
[PATCH 1/2] [Target_Core_Mod/Persistent_Reservations]: Add Specify Initiator Port Capable (SPEC_I_PT=1) support
[PATCH 2/2] [LIO-Target]: Update iSCSI TransportID parser to return length
drivers/lio-core/iscsi_target_tpg.c | 26 ++-
drivers/lio-core/iscsi_target_tpg.h | 2 +-
drivers/target/target_core_pr.c | 445 +++++++++++++++++++++++++++++--
include/target/target_core_fabric_ops.h | 2 +-
4 files changed, 448 insertions(+), 27 deletions(-)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-08-09 5:02 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-08-09 4:56 [PATCH 0/2] [Target_Core_Mod/Persistent_Reservations]: Add SPEC_I_PT=1 support Nicholas A. Bellinger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®