mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Avi Kivity <avi@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 27/48] KVM: VMX: Simplify pdptr and cr3 management
Date: Sun, 16 Aug 2009 12:29:47 +0300	[thread overview]
Message-ID: <1250415008-17175-28-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1250415008-17175-1-git-send-email-avi@redhat.com>

Instead of reading the PDPTRs from memory after every exit (which is slow
and wrong, as the PDPTRs are stored on the cpu), sync the PDPTRs from
memory to the VMCS before entry, and from the VMCS to memory after exit.
Do the same for cr3.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c |   21 +++++++++++++++------
 1 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ea0e1d5..752465f 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1547,10 +1547,6 @@ static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
 static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
 {
 	if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
-		if (!load_pdptrs(vcpu, vcpu->arch.cr3)) {
-			printk(KERN_ERR "EPT: Fail to load pdptrs!\n");
-			return;
-		}
 		vmcs_write64(GUEST_PDPTR0, vcpu->arch.pdptrs[0]);
 		vmcs_write64(GUEST_PDPTR1, vcpu->arch.pdptrs[1]);
 		vmcs_write64(GUEST_PDPTR2, vcpu->arch.pdptrs[2]);
@@ -1558,6 +1554,16 @@ static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
 	}
 }
 
+static void ept_save_pdptrs(struct kvm_vcpu *vcpu)
+{
+	if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
+		vcpu->arch.pdptrs[0] = vmcs_read64(GUEST_PDPTR0);
+		vcpu->arch.pdptrs[1] = vmcs_read64(GUEST_PDPTR1);
+		vcpu->arch.pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
+		vcpu->arch.pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
+	}
+}
+
 static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
 
 static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
@@ -1651,7 +1657,6 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 	if (enable_ept) {
 		eptp = construct_eptp(cr3);
 		vmcs_write64(EPT_POINTER, eptp);
-		ept_load_pdptrs(vcpu);
 		guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
 			VMX_EPT_IDENTITY_PAGETABLE_ADDR;
 	}
@@ -3252,7 +3257,7 @@ static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	 * to sync with guest real CR3. */
 	if (enable_ept && is_paging(vcpu)) {
 		vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
-		ept_load_pdptrs(vcpu);
+		ept_save_pdptrs(vcpu);
 	}
 
 	if (unlikely(vmx->fail)) {
@@ -3437,6 +3442,10 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	if (enable_ept && is_paging(vcpu)) {
+		vmcs_writel(GUEST_CR3, vcpu->arch.cr3);
+		ept_load_pdptrs(vcpu);
+	}
 	/* Record the guest's net vcpu time for enforced NMI injections. */
 	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked))
 		vmx->entry_time = ktime_get();
-- 
1.6.3.3


  parent reply	other threads:[~2009-08-16  9:35 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-16  9:29 [PATCH 00/48] KVM updates for 2.6.32 merge window (1/4) Avi Kivity
2009-08-16  9:29 ` [PATCH 01/48] KVM: VMX: Properly handle software interrupt re-injection in real mode Avi Kivity
2009-08-16  9:29 ` [PATCH 02/48] KVM: Replace MSR_IA32_TIME_STAMP_COUNTER with MSR_IA32_TSC of msr-index.h Avi Kivity
2009-08-16  9:29 ` [PATCH 03/48] KVM: Add MCE support Avi Kivity
2009-08-16  9:29 ` [PATCH 04/48] KVM: Use MSR names in place of address Avi Kivity
2009-08-16  9:29 ` [PATCH 05/48] KVM: fix cpuid E2BIG handling for extended request types Avi Kivity
2009-08-16  9:29 ` [PATCH 06/48] KVM: x86 emulator: Implement zero-extended immediate decoding Avi Kivity
2009-08-16  9:29 ` [PATCH 07/48] KVM: x86 emulator: fix jmp far decoding (opcode 0xea) Avi Kivity
2009-08-16  9:29 ` [PATCH 08/48] KVM: cleanup arch/x86/kvm/Makefile Avi Kivity
2009-08-16  9:29 ` [PATCH 09/48] KVM: Drop interrupt shadow when single stepping should be done only on VMX Avi Kivity
2009-08-16  9:29 ` [PATCH 10/48] KVM: Move common KVM Kconfig items to new file virt/kvm/Kconfig Avi Kivity
2009-08-16  9:29 ` [PATCH 11/48] KVM: irqfd Avi Kivity
2009-08-16  9:29 ` [PATCH 12/48] KVM: Allow PIT emulation without speaker port Avi Kivity
2009-08-16  9:29 ` [PATCH 13/48] KVM: ia64: Correct itc_offset calculations Avi Kivity
2009-08-16  9:29 ` [PATCH 14/48] KVM: s390: infrastructure to kick vcpus out of guest state Avi Kivity
2009-08-16  9:29 ` [PATCH 15/48] KVM: s390: fix signal handling Avi Kivity
2009-08-16  9:29 ` [PATCH 16/48] KVM: s390: streamline memslot handling Avi Kivity
2009-08-16  9:29 ` [PATCH 17/48] KVM: Downsize max support MSI-X entry to 256 Avi Kivity
2009-08-16  9:29 ` [PATCH 18/48] KVM: SVM: use explicit 64bit storage for sysenter values Avi Kivity
2009-08-16  9:29 ` [PATCH 19/48] KVM: No disable_irq for MSI/MSI-X interrupt on device assignment Avi Kivity
2009-08-16  9:29 ` [PATCH 20/48] KVM: remove redundant declarations Avi Kivity
2009-08-16  9:29 ` [PATCH 21/48] KVM: SVM: Fold kvm_svm.h info svm.c Avi Kivity
2009-08-16  9:29 ` [PATCH 22/48] KVM: powerpc: fix some init/exit annotations Avi Kivity
2009-08-16  9:29 ` [PATCH 23/48] KVM: Clean up coalesced_mmio destruction Avi Kivity
2009-08-16  9:29 ` [PATCH 24/48] KVM: cleanup io_device code Avi Kivity
2009-08-16  9:29 ` [PATCH 25/48] KVM: do not register i8254 PIO regions until we are initialized Avi Kivity
2009-08-16  9:29 ` [PATCH 26/48] KVM: VMX: Avoid duplicate ept tlb flush when setting cr3 Avi Kivity
2009-08-16  9:29 ` Avi Kivity [this message]
2009-08-16  9:29 ` [PATCH 28/48] KVM: Cache pdptrs Avi Kivity
2009-08-16  9:29 ` [PATCH 29/48] KVM: VMX: Fix reporting of unhandled EPT violations Avi Kivity
2009-08-16  9:29 ` [PATCH 30/48] KVM: Calculate available entries in coalesced mmio ring Avi Kivity
2009-08-16  9:29 ` [PATCH 31/48] KVM: ppc: e500: Move to Book-3e MMU definitions Avi Kivity
2009-08-16  9:29 ` [PATCH 32/48] KVM: ppc: e500: Directly pass pvr to guest Avi Kivity
2009-08-16  9:29 ` [PATCH 33/48] KVM: ppc: e500: Add MMUCFG and PVR emulation Avi Kivity
2009-08-16  9:29 ` [PATCH 34/48] KVM: Cleanup LAPIC interface Avi Kivity
2009-08-16  9:29 ` [PATCH 35/48] KVM: Grab pic lock in kvm_pic_clear_isr_ack Avi Kivity
2009-08-16  9:29 ` [PATCH 36/48] KVM: move coalesced_mmio locking to its own device Avi Kivity
2009-08-16  9:29 ` [PATCH 37/48] KVM: introduce irq_lock, use it to protect ioapic Avi Kivity
2009-08-16  9:29 ` [PATCH 38/48] KVM: switch irq injection/acking data structures to irq_lock Avi Kivity
2009-08-16  9:29 ` [PATCH 39/48] KVM: VMX: Support Unrestricted Guest feature Avi Kivity
2009-08-16  9:30 ` [PATCH 40/48] KVM: Reorder ioctls in kvm.h Avi Kivity
2009-08-16  9:30 ` [PATCH 41/48] KVM: VMX: Move rmode structure to vmx-specific code Avi Kivity
2009-08-16  9:30 ` [PATCH 42/48] KVM: MMU: Fix is_dirty_pte() Avi Kivity
2009-08-16  9:30 ` [PATCH 43/48] KVM: MMU: Adjust pte accessors to explicitly indicate guest or shadow pte Avi Kivity
2009-08-16  9:30 ` [PATCH 44/48] KVM: MMU: s/shadow_pte/spte/ Avi Kivity
2009-08-16  9:30 ` [PATCH 45/48] KVM: Introduce kvm_vcpu_is_bsp() function Avi Kivity
2009-08-16  9:30 ` [PATCH 46/48] KVM: Use pointer to vcpu instead of vcpu_id in timer code Avi Kivity
2009-08-16  9:30 ` [PATCH 47/48] KVM: Break dependency between vcpu index in vcpus array and vcpu_id Avi Kivity
2009-08-16  9:30 ` [PATCH 48/48] KVM: Use macro to iterate over vcpus Avi Kivity

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1250415008-17175-28-git-send-email-avi@redhat.com \
    --to=avi@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®