mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Avi Kivity <avi@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 37/48] KVM: introduce irq_lock, use it to protect ioapic
Date: Sun, 16 Aug 2009 12:29:57 +0300	[thread overview]
Message-ID: <1250415008-17175-38-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1250415008-17175-1-git-send-email-avi@redhat.com>

From: Marcelo Tosatti <mtosatti@redhat.com>

Introduce irq_lock, and use to protect ioapic data structures.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 include/linux/kvm_host.h |    3 ++-
 virt/kvm/ioapic.c        |    5 +++++
 virt/kvm/kvm_main.c      |    1 +
 3 files changed, 8 insertions(+), 1 deletions(-)

diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 19240fe..0c71688 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -124,7 +124,6 @@ struct kvm_kernel_irq_routing_entry {
 };
 
 struct kvm {
-	struct mutex lock; /* protects the vcpus array and APIC accesses */
 	spinlock_t mmu_lock;
 	spinlock_t requests_lock;
 	struct rw_semaphore slots_lock;
@@ -134,6 +133,7 @@ struct kvm {
 					KVM_PRIVATE_MEM_SLOTS];
 	struct kvm_vcpu *vcpus[KVM_MAX_VCPUS];
 	struct list_head vm_list;
+	struct mutex lock;
 	struct kvm_io_bus mmio_bus;
 	struct kvm_io_bus pio_bus;
 #ifdef CONFIG_HAVE_KVM_EVENTFD
@@ -150,6 +150,7 @@ struct kvm {
 	struct kvm_coalesced_mmio_ring *coalesced_mmio_ring;
 #endif
 
+	struct mutex irq_lock;
 #ifdef CONFIG_HAVE_KVM_IRQCHIP
 	struct list_head irq_routing; /* of kvm_kernel_irq_routing_entry */
 	struct hlist_head mask_notifier_list;
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 469b9fa..2a56671 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -243,6 +243,7 @@ static void ioapic_mmio_read(struct kvm_io_device *this, gpa_t addr, int len,
 	ioapic_debug("addr %lx\n", (unsigned long)addr);
 	ASSERT(!(addr & 0xf));	/* check alignment */
 
+	mutex_lock(&ioapic->kvm->irq_lock);
 	addr &= 0xff;
 	switch (addr) {
 	case IOAPIC_REG_SELECT:
@@ -269,6 +270,7 @@ static void ioapic_mmio_read(struct kvm_io_device *this, gpa_t addr, int len,
 	default:
 		printk(KERN_WARNING "ioapic: wrong length %d\n", len);
 	}
+	mutex_unlock(&ioapic->kvm->irq_lock);
 }
 
 static void ioapic_mmio_write(struct kvm_io_device *this, gpa_t addr, int len,
@@ -280,6 +282,8 @@ static void ioapic_mmio_write(struct kvm_io_device *this, gpa_t addr, int len,
 	ioapic_debug("ioapic_mmio_write addr=%p len=%d val=%p\n",
 		     (void*)addr, len, val);
 	ASSERT(!(addr & 0xf));	/* check alignment */
+
+	mutex_lock(&ioapic->kvm->irq_lock);
 	if (len == 4 || len == 8)
 		data = *(u32 *) val;
 	else {
@@ -305,6 +309,7 @@ static void ioapic_mmio_write(struct kvm_io_device *this, gpa_t addr, int len,
 	default:
 		break;
 	}
+	mutex_unlock(&ioapic->kvm->irq_lock);
 }
 
 void kvm_ioapic_reset(struct kvm_ioapic *ioapic)
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index d1f9c87..d47e660 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -982,6 +982,7 @@ static struct kvm *kvm_create_vm(void)
 	kvm_io_bus_init(&kvm->pio_bus);
 	kvm_irqfd_init(kvm);
 	mutex_init(&kvm->lock);
+	mutex_init(&kvm->irq_lock);
 	kvm_io_bus_init(&kvm->mmio_bus);
 	init_rwsem(&kvm->slots_lock);
 	atomic_set(&kvm->users_count, 1);
-- 
1.6.3.3


  parent reply	other threads:[~2009-08-16  9:32 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-16  9:29 [PATCH 00/48] KVM updates for 2.6.32 merge window (1/4) Avi Kivity
2009-08-16  9:29 ` [PATCH 01/48] KVM: VMX: Properly handle software interrupt re-injection in real mode Avi Kivity
2009-08-16  9:29 ` [PATCH 02/48] KVM: Replace MSR_IA32_TIME_STAMP_COUNTER with MSR_IA32_TSC of msr-index.h Avi Kivity
2009-08-16  9:29 ` [PATCH 03/48] KVM: Add MCE support Avi Kivity
2009-08-16  9:29 ` [PATCH 04/48] KVM: Use MSR names in place of address Avi Kivity
2009-08-16  9:29 ` [PATCH 05/48] KVM: fix cpuid E2BIG handling for extended request types Avi Kivity
2009-08-16  9:29 ` [PATCH 06/48] KVM: x86 emulator: Implement zero-extended immediate decoding Avi Kivity
2009-08-16  9:29 ` [PATCH 07/48] KVM: x86 emulator: fix jmp far decoding (opcode 0xea) Avi Kivity
2009-08-16  9:29 ` [PATCH 08/48] KVM: cleanup arch/x86/kvm/Makefile Avi Kivity
2009-08-16  9:29 ` [PATCH 09/48] KVM: Drop interrupt shadow when single stepping should be done only on VMX Avi Kivity
2009-08-16  9:29 ` [PATCH 10/48] KVM: Move common KVM Kconfig items to new file virt/kvm/Kconfig Avi Kivity
2009-08-16  9:29 ` [PATCH 11/48] KVM: irqfd Avi Kivity
2009-08-16  9:29 ` [PATCH 12/48] KVM: Allow PIT emulation without speaker port Avi Kivity
2009-08-16  9:29 ` [PATCH 13/48] KVM: ia64: Correct itc_offset calculations Avi Kivity
2009-08-16  9:29 ` [PATCH 14/48] KVM: s390: infrastructure to kick vcpus out of guest state Avi Kivity
2009-08-16  9:29 ` [PATCH 15/48] KVM: s390: fix signal handling Avi Kivity
2009-08-16  9:29 ` [PATCH 16/48] KVM: s390: streamline memslot handling Avi Kivity
2009-08-16  9:29 ` [PATCH 17/48] KVM: Downsize max support MSI-X entry to 256 Avi Kivity
2009-08-16  9:29 ` [PATCH 18/48] KVM: SVM: use explicit 64bit storage for sysenter values Avi Kivity
2009-08-16  9:29 ` [PATCH 19/48] KVM: No disable_irq for MSI/MSI-X interrupt on device assignment Avi Kivity
2009-08-16  9:29 ` [PATCH 20/48] KVM: remove redundant declarations Avi Kivity
2009-08-16  9:29 ` [PATCH 21/48] KVM: SVM: Fold kvm_svm.h info svm.c Avi Kivity
2009-08-16  9:29 ` [PATCH 22/48] KVM: powerpc: fix some init/exit annotations Avi Kivity
2009-08-16  9:29 ` [PATCH 23/48] KVM: Clean up coalesced_mmio destruction Avi Kivity
2009-08-16  9:29 ` [PATCH 24/48] KVM: cleanup io_device code Avi Kivity
2009-08-16  9:29 ` [PATCH 25/48] KVM: do not register i8254 PIO regions until we are initialized Avi Kivity
2009-08-16  9:29 ` [PATCH 26/48] KVM: VMX: Avoid duplicate ept tlb flush when setting cr3 Avi Kivity
2009-08-16  9:29 ` [PATCH 27/48] KVM: VMX: Simplify pdptr and cr3 management Avi Kivity
2009-08-16  9:29 ` [PATCH 28/48] KVM: Cache pdptrs Avi Kivity
2009-08-16  9:29 ` [PATCH 29/48] KVM: VMX: Fix reporting of unhandled EPT violations Avi Kivity
2009-08-16  9:29 ` [PATCH 30/48] KVM: Calculate available entries in coalesced mmio ring Avi Kivity
2009-08-16  9:29 ` [PATCH 31/48] KVM: ppc: e500: Move to Book-3e MMU definitions Avi Kivity
2009-08-16  9:29 ` [PATCH 32/48] KVM: ppc: e500: Directly pass pvr to guest Avi Kivity
2009-08-16  9:29 ` [PATCH 33/48] KVM: ppc: e500: Add MMUCFG and PVR emulation Avi Kivity
2009-08-16  9:29 ` [PATCH 34/48] KVM: Cleanup LAPIC interface Avi Kivity
2009-08-16  9:29 ` [PATCH 35/48] KVM: Grab pic lock in kvm_pic_clear_isr_ack Avi Kivity
2009-08-16  9:29 ` [PATCH 36/48] KVM: move coalesced_mmio locking to its own device Avi Kivity
2009-08-16  9:29 ` Avi Kivity [this message]
2009-08-16  9:29 ` [PATCH 38/48] KVM: switch irq injection/acking data structures to irq_lock Avi Kivity
2009-08-16  9:29 ` [PATCH 39/48] KVM: VMX: Support Unrestricted Guest feature Avi Kivity
2009-08-16  9:30 ` [PATCH 40/48] KVM: Reorder ioctls in kvm.h Avi Kivity
2009-08-16  9:30 ` [PATCH 41/48] KVM: VMX: Move rmode structure to vmx-specific code Avi Kivity
2009-08-16  9:30 ` [PATCH 42/48] KVM: MMU: Fix is_dirty_pte() Avi Kivity
2009-08-16  9:30 ` [PATCH 43/48] KVM: MMU: Adjust pte accessors to explicitly indicate guest or shadow pte Avi Kivity
2009-08-16  9:30 ` [PATCH 44/48] KVM: MMU: s/shadow_pte/spte/ Avi Kivity
2009-08-16  9:30 ` [PATCH 45/48] KVM: Introduce kvm_vcpu_is_bsp() function Avi Kivity
2009-08-16  9:30 ` [PATCH 46/48] KVM: Use pointer to vcpu instead of vcpu_id in timer code Avi Kivity
2009-08-16  9:30 ` [PATCH 47/48] KVM: Break dependency between vcpu index in vcpus array and vcpu_id Avi Kivity
2009-08-16  9:30 ` [PATCH 48/48] KVM: Use macro to iterate over vcpus Avi Kivity

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1250415008-17175-38-git-send-email-avi@redhat.com \
    --to=avi@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®