From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Jiri Slaby <jirislaby@gmail.com>, Alan Cox <alan@linux.intel.com>,
Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 15/79] cyclades: use dtr_rts helpers
Date: Sat, 19 Sep 2009 14:36:20 -0700 [thread overview]
Message-ID: <1253396244-7885-15-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20090919213345.GB7668@kroah.com>
From: Jiri Slaby <jirislaby@gmail.com>
For Z cards, use tty helpers for dtr_rts.
If we did the same for Y cards, it will cause a deadlock, because
cyy_dtr_rts takes a lock which we already hold.
Instead, we introduce a Y helper expecting card lock to be held.
It may then be called with set/clear masks from other places.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/cyclades.c | 280 +++++++++++++---------------------------------
1 files changed, 79 insertions(+), 201 deletions(-)
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index b6d40ad..7462795 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -825,6 +825,66 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
} /* cyy_interrupt */
+static void cyy_change_rts_dtr(struct cyclades_port *info, unsigned int set,
+ unsigned int clear)
+{
+ struct cyclades_card *card = info->card;
+ void __iomem *base_addr;
+ int chip, channel, index;
+
+ channel = info->line - card->first_line;
+ chip = channel >> 2;
+ channel &= 0x03;
+ index = card->bus_index;
+ base_addr = card->base_addr + (cy_chip_offset[chip] << index);
+
+ if (set & TIOCM_RTS) {
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
+ } else {
+ cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
+ }
+ }
+ if (clear & TIOCM_RTS) {
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
+ } else {
+ cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
+ }
+ }
+ if (set & TIOCM_DTR) {
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
+ } else {
+ cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
+ }
+#ifdef CY_DEBUG_DTR
+ printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
+ readb(base_addr + (CyMSVR1 << index)),
+ readb(base_addr + (CyMSVR2 << index)));
+#endif
+ }
+ if (clear & TIOCM_DTR) {
+ cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
+ if (info->rtsdtr_inv) {
+ cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
+ } else {
+ cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
+ }
+
+#ifdef CY_DEBUG_DTR
+ printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
+ readb(base_addr + (CyMSVR1 << index)),
+ readb(base_addr + (CyMSVR2 << index)));
+#endif
+ }
+}
+
/***********************************************************/
/********* End of block of Cyclom-Y specific code **********/
/******** Start of block of Cyclades-Z specific code *******/
@@ -1290,16 +1350,7 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
cyy_issue_cmd(base_addr, CyCHAN_CTL | CyENB_RCVR | CyENB_XMTR,
index);
- cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
- cy_writeb(base_addr + (CyMSVR1 << index), CyRTS);
- cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);
-
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:startup raising DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
+ cyy_change_rts_dtr(info, TIOCM_RTS | TIOCM_DTR, 0);
cy_writeb(base_addr + (CySRER << index),
readb(base_addr + (CySRER << index)) | CyRxData);
@@ -1362,16 +1413,7 @@ static int cy_startup(struct cyclades_port *info, struct tty_struct *tty)
/* set timeout !!! */
/* set RTS and DTR !!! */
- cy_writel(&ch_ctrl->rs_control, readl(&ch_ctrl->rs_control) |
- C_RS_RTS | C_RS_DTR);
- retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L);
- if (retval != 0) {
- printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was "
- "%x\n", info->line, retval);
- }
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:startup raising Z DTR\n");
-#endif
+ tty_port_raise_dtr_rts(&info->port);
/* enable send, recv, modem !!! */
@@ -1473,17 +1515,9 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
info->port.xmit_buf = NULL;
free_page((unsigned long)temp);
}
- cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
- if (tty->termios->c_cflag & HUPCL) {
- cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
- cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc shutdown dropping DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
- }
+ if (tty->termios->c_cflag & HUPCL)
+ cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
+
cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index);
/* it may be appropriate to clear _XMIT at
some later date (after testing)!!! */
@@ -1492,9 +1526,6 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
info->port.flags &= ~ASYNC_INITIALIZED;
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
- struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
- int retval;
-
#ifdef CY_DEBUG_OPEN
printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
"base_addr %p\n", card, channel, card->base_addr);
@@ -1512,20 +1543,8 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
free_page((unsigned long)temp);
}
- if (tty->termios->c_cflag & HUPCL) {
- cy_writel(&ch_ctrl->rs_control,
- readl(&ch_ctrl->rs_control) &
- ~(C_RS_RTS | C_RS_DTR));
- retval = cyz_issue_cmd(info->card, channel,
- C_CM_IOCTLM, 0L);
- if (retval != 0) {
- printk(KERN_ERR"cyc:shutdown retval on ttyC%d "
- "was %x\n", info->line, retval);
- }
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:shutdown dropping Z DTR\n");
-#endif
- }
+ if (tty->termios->c_cflag & HUPCL)
+ tty_port_lower_dtr_rts(&info->port);
set_bit(TTY_IO_ERROR, &tty->flags);
info->port.flags &= ~ASYNC_INITIALIZED;
@@ -2273,35 +2292,10 @@ static void cy_set_line_char(struct cyclades_port *info, struct tty_struct *tty)
CyDSR | CyCTS | CyRI | CyDCD);
}
- if (i == 0) { /* baud rate is zero, turn off line */
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR1 << index),
- ~CyRTS);
- } else {
- cy_writeb(base_addr + (CyMSVR2 << index),
- ~CyDTR);
- }
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:set_line_char dropping DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
- } else {
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR1 << index),
- CyRTS);
- } else {
- cy_writeb(base_addr + (CyMSVR2 << index),
- CyDTR);
- }
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:set_line_char raising DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
- }
+ if (i == 0) /* baud rate is zero, turn off line */
+ cyy_change_rts_dtr(info, 0, TIOCM_DTR);
+ else
+ cyy_change_rts_dtr(info, TIOCM_DTR, 0);
clear_bit(TTY_IO_ERROR, &tty->flags);
spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2604,9 +2598,8 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
{
struct cyclades_port *info = tty->driver_data;
struct cyclades_card *card;
- int chip, channel, index;
unsigned long flags;
- int retval;
+ int channel, retval;
if (serial_paranoia_check(info, tty->name, __func__))
return -ENODEV;
@@ -2614,77 +2607,9 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
card = info->card;
channel = (info->line) - (card->first_line);
if (!cy_is_Z(card)) {
- void __iomem *base_addr;
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr + (cy_chip_offset[chip] << index);
-
- if (set & TIOCM_RTS) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR2 << index),
- CyDTR);
- } else {
- cy_writeb(base_addr + (CyMSVR1 << index),
- CyRTS);
- }
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
- if (clear & TIOCM_RTS) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR2 << index),
- ~CyDTR);
- } else {
- cy_writeb(base_addr + (CyMSVR1 << index),
- ~CyRTS);
- }
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
- if (set & TIOCM_DTR) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR1 << index),
- CyRTS);
- } else {
- cy_writeb(base_addr + (CyMSVR2 << index),
- CyDTR);
- }
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
- if (clear & TIOCM_DTR) {
- spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR1 << index),
- ~CyRTS);
- } else {
- cy_writeb(base_addr + (CyMSVR2 << index),
- ~CyDTR);
- }
-
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base_addr + (CyMSVR1 << index)),
- readb(base_addr + (CyMSVR2 << index)));
-#endif
- spin_unlock_irqrestore(&card->card_lock, flags);
- }
+ spin_lock_irqsave(&card->card_lock, flags);
+ cyy_change_rts_dtr(info, set, clear);
+ spin_unlock_irqrestore(&card->card_lock, flags);
} else {
if (cyz_is_loaded(card)) {
struct CH_CTRL __iomem *ch_ctrl = info->u.cyz.ch_ctrl;
@@ -3177,8 +3102,6 @@ static void cy_throttle(struct tty_struct *tty)
struct cyclades_port *info = tty->driver_data;
struct cyclades_card *card;
unsigned long flags;
- void __iomem *base_addr;
- int chip, channel, index;
#ifdef CY_DEBUG_THROTTLE
char buf[64];
@@ -3200,24 +3123,9 @@ static void cy_throttle(struct tty_struct *tty)
}
if (tty->termios->c_cflag & CRTSCTS) {
- channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr +
- (cy_chip_offset[chip] << index);
-
spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR2 << index),
- ~CyDTR);
- } else {
- cy_writeb(base_addr + (CyMSVR1 << index),
- ~CyRTS);
- }
+ cyy_change_rts_dtr(info, 0, TIOCM_RTS);
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
info->throttle = 1;
@@ -3235,8 +3143,6 @@ static void cy_unthrottle(struct tty_struct *tty)
struct cyclades_port *info = tty->driver_data;
struct cyclades_card *card;
unsigned long flags;
- void __iomem *base_addr;
- int chip, channel, index;
#ifdef CY_DEBUG_THROTTLE
char buf[64];
@@ -3257,24 +3163,9 @@ static void cy_unthrottle(struct tty_struct *tty)
if (tty->termios->c_cflag & CRTSCTS) {
card = info->card;
- channel = info->line - card->first_line;
if (!cy_is_Z(card)) {
- chip = channel >> 2;
- channel &= 0x03;
- index = card->bus_index;
- base_addr = card->base_addr +
- (cy_chip_offset[chip] << index);
-
spin_lock_irqsave(&card->card_lock, flags);
- cy_writeb(base_addr + (CyCAR << index),
- (u_char) channel);
- if (info->rtsdtr_inv) {
- cy_writeb(base_addr + (CyMSVR2 << index),
- CyDTR);
- } else {
- cy_writeb(base_addr + (CyMSVR1 << index),
- CyRTS);
- }
+ cyy_change_rts_dtr(info, TIOCM_RTS, 0);
spin_unlock_irqrestore(&card->card_lock, flags);
} else {
info->throttle = 0;
@@ -3395,24 +3286,11 @@ static void cyy_dtr_rts(struct tty_port *port, int raise)
struct cyclades_port *info = container_of(port, struct cyclades_port,
port);
struct cyclades_card *cinfo = info->card;
- void __iomem *base = cinfo->base_addr;
unsigned long flags;
- int channel = info->line - cinfo->first_line;
- int chip = channel >> 2, index = cinfo->bus_index;
-
- channel &= 0x03;
- base += cy_chip_offset[chip] << index;
spin_lock_irqsave(&cinfo->card_lock, flags);
- cy_writeb(base + (CyCAR << index), (u8)channel);
- cy_writeb(base + (CyMSVR1 << index), raise ? CyRTS : ~CyRTS);
- cy_writeb(base + (CyMSVR2 << index), raise ? CyDTR : ~CyDTR);
-#ifdef CY_DEBUG_DTR
- printk(KERN_DEBUG "%s: raising DTR\n", __func__);
- printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
- readb(base + (CyMSVR1 << index)),
- readb(base + (CyMSVR2 << index)));
-#endif
+ cyy_change_rts_dtr(info, raise ? TIOCM_RTS | TIOCM_DTR : 0,
+ raise ? 0 : TIOCM_RTS | TIOCM_DTR);
spin_unlock_irqrestore(&cinfo->card_lock, flags);
}
--
1.6.4.2
next prev parent reply other threads:[~2009-09-19 21:53 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-19 21:33 [GIT PATCH] TTY patches for 2.6.31-git Greg KH
2009-09-19 21:36 ` [PATCH 01/79] tty: gigaset: really fix chars_in_buffer Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 02/79] serial: bfin_5xx: fix building as module when early printk is enabled Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 03/79] tty: serial/pcmcia: add ID for Advantech card Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 04/79] tty-ldisc: make /proc/tty/ldiscs use ldisc_ops instead of ldiscs Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 05/79] tty-ldisc: get rid of tty_ldisc_try_get() helper function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 06/79] tty: includecheck fix: drivers/char, vt.c Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 07/79] tty: icom: bit and/or confusion? Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 08/79] cyclades: add tty refcounting Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 09/79] cyclades: remove block_til_ready Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 10/79] cyclades: avoid addresses recomputation Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 11/79] cyclades: switch to tty_port_hangup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 12/79] cyclades: close cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 13/79] cyclades: overall cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 14/79] cyclades: sleep instead busy-wait Greg Kroah-Hartman
2009-09-19 21:36 ` Greg Kroah-Hartman [this message]
2009-09-19 21:36 ` [PATCH 16/79] cyclades: merge cy_startup tails Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 17/79] cyclades: ioctls cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 18/79] cyclades: tiocm cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 19/79] cyclades: introduce cyy_readb/writeb Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 20/79] cyclades: remove more duplicated code Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 21/79] slip: Clean up create and destroy Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 22/79] kfifo: Use "const" definitions Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 23/79] MOS7720 has no tiocmget method Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 24/79] tty: usb_serial_mos7720: Fix get_lsr_info Greg Kroah-Hartman
2010-01-26 11:08 ` Kees Schoenmakers
2010-01-26 11:09 ` Kees Schoenmakers
2009-09-19 21:36 ` [PATCH 25/79] tty: Fix a typo noted in passing Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 26/79] mos7840: remove old dead modem logic Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 27/79] serial: 8250: add IRQ trigger support Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 28/79] 8250: Now honours baud rate lower bounds Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 29/79] tty: Add a full port_close function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 30/79] riscom8: split open and close methods up Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 31/79] mxser: Split close ready for a standard tty_port_close method Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 32/79] isicom: Split the close hardware bits out Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 33/79] tty: riscom8 kref and tty_port_close Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 34/79] cyclades: use the full port_close function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 35/79] tty: make the kref destructor occur asynchronously Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 36/79] cdc_acm: Fix to use modern speed interfaces Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 37/79] tty: USB hangup is racy Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 38/79] tty: remove dtr/rts use from the driver open methods Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 39/79] tty: USB can now use the shutdown method for kref based freeing of ports Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 40/79] vt: add an event interface Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 41/79] vt: remove power stuff from kernel/power Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 42/79] vt: move kernel stuff out of vt.h Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 43/79] vt: add an activate and lock Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 44/79] tty: USB does not need the filp argument in the drivers Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 45/79] isicom: split the open method for the isicom device Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 46/79] serial: kill off uart_info Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 47/79] serial: Fold closing_* fields into the tty_port ones Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 48/79] serial: use tty_port pointers in the core code Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 49/79] serial: move count into the tty_port version Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 50/79] serial: move the flags into the tty_port field Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 51/79] serial: kill off uif_t Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 52/79] serial: replace the state mutex with the tty port mutex Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 53/79] serial: move delta_msr_wait into the tty_port Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 54/79] serial: move port users helper Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 55/79] serial: kill USF_CLOSING_* definitions Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 56/79] serial: introduce tty krefs Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 57/79] Set proper console speed on resume if console suspend is disabled Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 58/79] tty: USB serial termios bits Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 59/79] n_tty: honor opost flag for echoes Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 60/79] n_tty: move echoctl check and clean up logic Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 61/79] tty: handle VT specific compat ioctls in vt driver Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 62/79] tty: vt: use printk_once Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 63/79] tty: Power: fix suspend vt regression Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 64/79] TTY: fix typos Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 65/79] tty: riscom8, fix shutdown declaration Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 66/79] tty: riscom8, fix tty refcnt Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 67/79] tty: USB: serial/mct_u232, " Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 68/79] uartlite: support shared interrupt lines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 69/79] tty: Char: mxser, add support for CP112UL Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 70/79] tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 71/79] usb-serial: change referencing of port and serial structures Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 72/79] usb-serial: put subroutines in logical order Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 73/79] usb-serial: change logic of serial lookups Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 74/79] usb-serial: acquire references when a new tty is installed Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 75/79] usb-serial: fix termios initialization logic Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 76/79] usb-serial: rename subroutines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 77/79] usb-serial: add missing tests and debug lines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 78/79] usb-serial: straighten out serial_open Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 79/79] USB serial: update the console driver Greg Kroah-Hartman
2009-09-30 10:09 ` [origin tree boot crash] Re: [GIT PATCH] TTY patches for 2.6.31-git Ingo Molnar
2009-09-30 10:17 ` Alan Cox
2009-10-01 8:21 ` Ingo Molnar
2009-10-01 10:36 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1253396244-7885-15-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=alan@linux.intel.com \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome