[PATCH 50/79] serial: move the flags into the tty_port field

[Greg Kroah-Hartman <gregkh@suse.de>]

From: Alan Cox <alan@linux.intel.com>

Fortunately the serial layer was designed to use the same flag values but
with different names. It has its own SUSPENDED flag which is a free slot in
the ASYNC flags so we allocate it in the ASYNC flags instead.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/serial_core.c |  153 +++++++++++++++++++++---------------------
 include/linux/serial.h       |    2 +
 include/linux/serial_core.h  |   48 +++++--------
 3 files changed, 98 insertions(+), 105 deletions(-)

diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 4af3364..744dec9 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -29,10 +29,10 @@
 #include <linux/console.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/serial_core.h>
 #include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/serial.h> /* for serial_state and serial_icounter_struct */
+#include <linux/serial_core.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 
@@ -146,7 +146,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
 	unsigned long page;
 	int retval = 0;
 
-	if (state->flags & UIF_INITIALIZED)
+	if (port->flags & ASYNC_INITIALIZED)
 		return 0;
 
 	/*
@@ -189,14 +189,14 @@ static int uart_startup(struct uart_state *state, int init_hw)
 				uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
 		}
 
-		if (state->flags & UIF_CTS_FLOW) {
+		if (port->flags & ASYNC_CTS_FLOW) {
 			spin_lock_irq(&uport->lock);
 			if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
 				port->tty->hw_stopped = 1;
 			spin_unlock_irq(&uport->lock);
 		}
 
-		state->flags |= UIF_INITIALIZED;
+		set_bit(ASYNCB_INITIALIZED, &port->flags);
 
 		clear_bit(TTY_IO_ERROR, &port->tty->flags);
 	}
@@ -214,7 +214,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
  */
 static void uart_shutdown(struct uart_state *state)
 {
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
 	struct tty_struct *tty = state->port.tty;
 
 	/*
@@ -223,14 +223,12 @@ static void uart_shutdown(struct uart_state *state)
 	if (tty)
 		set_bit(TTY_IO_ERROR, &tty->flags);
 
-	if (state->flags & UIF_INITIALIZED) {
-		state->flags &= ~UIF_INITIALIZED;
-
+	if (test_and_clear_bit(ASYNCB_INITIALIZED, &state->port.flags)) {
 		/*
 		 * Turn off DTR and RTS early.
 		 */
 		if (!tty || (tty->termios->c_cflag & HUPCL))
-			uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+			uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
 
 		/*
 		 * clear delta_msr_wait queue to avoid mem leaks: we may free
@@ -244,12 +242,12 @@ static void uart_shutdown(struct uart_state *state)
 		/*
 		 * Free the IRQ and disable the port.
 		 */
-		port->ops->shutdown(port);
+		uport->ops->shutdown(uport);
 
 		/*
 		 * Ensure that the IRQ handler isn't running on another CPU.
 		 */
-		synchronize_irq(port->irq);
+		synchronize_irq(uport->irq);
 	}
 
 	/*
@@ -429,15 +427,16 @@ EXPORT_SYMBOL(uart_get_divisor);
 static void
 uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
 {
-	struct tty_struct *tty = state->port.tty;
-	struct uart_port *port = state->uart_port;
+	struct tty_port *port = &state->port;
+	struct tty_struct *tty = port->tty;
+	struct uart_port *uport = state->uart_port;
 	struct ktermios *termios;
 
 	/*
 	 * If we have no tty, termios, or the port does not exist,
 	 * then we can't set the parameters for this port.
 	 */
-	if (!tty || !tty->termios || port->type == PORT_UNKNOWN)
+	if (!tty || !tty->termios || uport->type == PORT_UNKNOWN)
 		return;
 
 	termios = tty->termios;
@@ -446,16 +445,16 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
 	 * Set flags based on termios cflag
 	 */
 	if (termios->c_cflag & CRTSCTS)
-		state->flags |= UIF_CTS_FLOW;
+		set_bit(ASYNCB_CTS_FLOW, &port->flags);
 	else
-		state->flags &= ~UIF_CTS_FLOW;
+		clear_bit(ASYNCB_CTS_FLOW, &port->flags);
 
 	if (termios->c_cflag & CLOCAL)
-		state->flags &= ~UIF_CHECK_CD;
+		clear_bit(ASYNCB_CHECK_CD, &port->flags);
 	else
-		state->flags |= UIF_CHECK_CD;
+		set_bit(ASYNCB_CHECK_CD, &port->flags);
 
-	port->ops->set_termios(port, termios, old_termios);
+	uport->ops->set_termios(uport, termios, old_termios);
 }
 
 static inline int
@@ -848,7 +847,7 @@ static int uart_set_info(struct uart_state *state,
 	retval = 0;
 	if (uport->type == PORT_UNKNOWN)
 		goto exit;
-	if (state->flags & UIF_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		if (((old_flags ^ uport->flags) & UPF_SPD_MASK) ||
 		    old_custom_divisor != uport->custom_divisor) {
 			/*
@@ -1306,7 +1305,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	 * At this point, we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts.
 	 */
-	if (state->flags & UIF_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		unsigned long flags;
 		spin_lock_irqsave(&port->lock, flags);
 		uport->ops->stop_rx(uport);
@@ -1337,7 +1336,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	/*
 	 * Wake up anyone trying to open this port.
 	 */
-	state->flags &= ~UIF_NORMAL_ACTIVE;
+	clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 	wake_up_interruptible(&port->open_wait);
 
 done:
@@ -1418,11 +1417,11 @@ static void uart_hangup(struct tty_struct *tty)
 	pr_debug("uart_hangup(%d)\n", state->uart_port->line);
 
 	mutex_lock(&state->mutex);
-	if (state->flags & UIF_NORMAL_ACTIVE) {
+	if (port->flags & ASYNC_NORMAL_ACTIVE) {
 		uart_flush_buffer(tty);
 		uart_shutdown(state);
 		port->count = 0;
-		state->flags &= ~UIF_NORMAL_ACTIVE;
+		clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 		port->tty = NULL;
 		wake_up_interruptible(&port->open_wait);
 		wake_up_interruptible(&state->delta_msr_wait);
@@ -1493,7 +1492,7 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 		/*
 		 * If the port has been closed, tell userspace/restart open.
 		 */
-		if (!(state->flags & UIF_INITIALIZED))
+		if (!(port->flags & ASYNC_INITIALIZED))
 			break;
 
 		/*
@@ -1662,8 +1661,8 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	/*
 	 * If this is the first open to succeed, adjust things to suit.
 	 */
-	if (retval == 0 && !(state->flags & UIF_NORMAL_ACTIVE)) {
-		state->flags |= UIF_NORMAL_ACTIVE;
+	if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
+		set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 
 		uart_update_termios(state);
 	}
@@ -1985,63 +1984,64 @@ static int serial_match_port(struct device *dev, void *data)
 	return dev->devt == devt; /* Actually, only one tty per port */
 }
 
-int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
+int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 	struct device *tty_dev;
-	struct uart_match match = {port, drv};
+	struct uart_match match = {uport, drv};
 
 	mutex_lock(&state->mutex);
 
-	if (!console_suspend_enabled && uart_console(port)) {
+	if (!console_suspend_enabled && uart_console(uport)) {
 		/* we're going to avoid suspending serial console */
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
 
-	tty_dev = device_find_child(port->dev, &match, serial_match_port);
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
-		enable_irq_wake(port->irq);
+		enable_irq_wake(uport->irq);
 		put_device(tty_dev);
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
-	port->suspended = 1;
+	uport->suspended = 1;
 
-	if (state->flags & UIF_INITIALIZED) {
-		const struct uart_ops *ops = port->ops;
+	if (port->flags & ASYNC_INITIALIZED) {
+		const struct uart_ops *ops = uport->ops;
 		int tries;
 
-		state->flags = (state->flags & ~UIF_INITIALIZED)
-				     | UIF_SUSPENDED;
+		set_bit(ASYNCB_SUSPENDED, &port->flags);
+		clear_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		spin_lock_irq(&port->lock);
-		ops->stop_tx(port);
-		ops->set_mctrl(port, 0);
-		ops->stop_rx(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		ops->stop_tx(uport);
+		ops->set_mctrl(uport, 0);
+		ops->stop_rx(uport);
+		spin_unlock_irq(&uport->lock);
 
 		/*
 		 * Wait for the transmitter to empty.
 		 */
-		for (tries = 3; !ops->tx_empty(port) && tries; tries--)
+		for (tries = 3; !ops->tx_empty(uport) && tries; tries--)
 			msleep(10);
 		if (!tries)
 			printk(KERN_ERR "%s%s%s%d: Unable to drain "
 					"transmitter\n",
-			       port->dev ? dev_name(port->dev) : "",
-			       port->dev ? ": " : "",
+			       uport->dev ? dev_name(uport->dev) : "",
+			       uport->dev ? ": " : "",
 			       drv->dev_name,
-			       drv->tty_driver->name_base + port->line);
+			       drv->tty_driver->name_base + uport->line);
 
-		ops->shutdown(port);
+		ops->shutdown(uport);
 	}
 
 	/*
 	 * Disable the console device before suspending.
 	 */
-	if (uart_console(port))
-		console_stop(port->cons);
+	if (uart_console(uport))
+		console_stop(uport->cons);
 
 	uart_change_pm(state, 3);
 
@@ -2050,67 +2050,68 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
 	return 0;
 }
 
-int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
+int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 	struct device *tty_dev;
-	struct uart_match match = {port, drv};
+	struct uart_match match = {uport, drv};
 
 	mutex_lock(&state->mutex);
 
-	if (!console_suspend_enabled && uart_console(port)) {
+	if (!console_suspend_enabled && uart_console(uport)) {
 		/* no need to resume serial console, it wasn't suspended */
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
 
-	tty_dev = device_find_child(port->dev, &match, serial_match_port);
-	if (!port->suspended && device_may_wakeup(tty_dev)) {
-		disable_irq_wake(port->irq);
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+	if (!uport->suspended && device_may_wakeup(tty_dev)) {
+		disable_irq_wake(uport->irq);
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
-	port->suspended = 0;
+	uport->suspended = 0;
 
 	/*
 	 * Re-enable the console device after suspending.
 	 */
-	if (uart_console(port)) {
+	if (uart_console(uport)) {
 		struct ktermios termios;
 
 		/*
 		 * First try to use the console cflag setting.
 		 */
 		memset(&termios, 0, sizeof(struct ktermios));
-		termios.c_cflag = port->cons->cflag;
+		termios.c_cflag = uport->cons->cflag;
 
 		/*
 		 * If that's unset, use the tty termios setting.
 		 */
-		if (state->port.tty && termios.c_cflag == 0)
-			termios = *state->port.tty->termios;
+		if (port->tty && termios.c_cflag == 0)
+			termios = *port->tty->termios;
 
 		uart_change_pm(state, 0);
-		port->ops->set_termios(port, &termios, NULL);
-		console_start(port->cons);
+		uport->ops->set_termios(uport, &termios, NULL);
+		console_start(uport->cons);
 	}
 
-	if (state->flags & UIF_SUSPENDED) {
-		const struct uart_ops *ops = port->ops;
+	if (port->flags & ASYNC_SUSPENDED) {
+		const struct uart_ops *ops = uport->ops;
 		int ret;
 
 		uart_change_pm(state, 0);
-		spin_lock_irq(&port->lock);
-		ops->set_mctrl(port, 0);
-		spin_unlock_irq(&port->lock);
-		ret = ops->startup(port);
+		spin_lock_irq(&uport->lock);
+		ops->set_mctrl(uport, 0);
+		spin_unlock_irq(&uport->lock);
+		ret = ops->startup(uport);
 		if (ret == 0) {
 			uart_change_speed(state, NULL);
-			spin_lock_irq(&port->lock);
-			ops->set_mctrl(port, port->mctrl);
-			ops->start_tx(port);
-			spin_unlock_irq(&port->lock);
-			state->flags |= UIF_INITIALIZED;
+			spin_lock_irq(&uport->lock);
+			ops->set_mctrl(uport, uport->mctrl);
+			ops->start_tx(uport);
+			spin_unlock_irq(&uport->lock);
+			set_bit(ASYNCB_INITIALIZED, &port->flags);
 		} else {
 			/*
 			 * Failed to resume - maybe hardware went away?
@@ -2120,7 +2121,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 			uart_shutdown(state);
 		}
 
-		state->flags &= ~UIF_SUSPENDED;
+		clear_bit(ASYNCB_SUSPENDED, &port->flags);
 	}
 
 	mutex_unlock(&state->mutex);
diff --git a/include/linux/serial.h b/include/linux/serial.h
index e5bb75a..c8613c3 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -122,6 +122,7 @@ struct serial_uart_config {
 
 /* Internal flags used only by kernel */
 #define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
 #define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
 #define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
 #define ASYNCB_CLOSING		27 /* Serial port is closing */
@@ -133,6 +134,7 @@ struct serial_uart_config {
 #define ASYNCB_FIRST_KERNEL	22
 
 #define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
 #define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
 #define ASYNC_SAK		(1U << ASYNCB_SAK)
 #define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 63ad909..284ef7f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,6 +20,8 @@
 #ifndef LINUX_SERIAL_CORE_H
 #define LINUX_SERIAL_CORE_H
 
+#include <linux/serial.h>
+
 /*
  * The type definitions.  These are from Ted Ts'o's serial.h
  */
@@ -356,19 +358,6 @@ struct uart_state {
 
 	int			pm_state;
 	struct circ_buf		xmit;
-	uif_t			flags;
-
-/*
- * Definitions for info->flags.  These are _private_ to serial_core, and
- * are specific to this structure.  They may be queried by low level drivers.
- *
- * FIXME: use the ASY_ definitions
- */
-#define UIF_CHECK_CD		((__force uif_t) (1 << 25))
-#define UIF_CTS_FLOW		((__force uif_t) (1 << 26))
-#define UIF_NORMAL_ACTIVE	((__force uif_t) (1 << 29))
-#define UIF_INITIALIZED		((__force uif_t) (1 << 31))
-#define UIF_SUSPENDED		((__force uif_t) (1 << 30))
 
 	struct tasklet_struct	tlet;
 	wait_queue_head_t	delta_msr_wait;
@@ -509,22 +498,23 @@ static inline int uart_handle_break(struct uart_port *port)
  *	@status: new carrier detect status, nonzero if active
  */
 static inline void
-uart_handle_dcd_change(struct uart_port *port, unsigned int status)
+uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
 {
-	struct uart_state *state = port->state;
+	struct uart_state *state = uport->state;
+	struct tty_port *port = &state->port;
 
-	port->icount.dcd++;
+	uport->icount.dcd++;
 
 #ifdef CONFIG_HARD_PPS
-	if ((port->flags & UPF_HARDPPS_CD) && status)
+	if ((uport->flags & UPF_HARDPPS_CD) && status)
 		hardpps();
 #endif
 
-	if (state->flags & UIF_CHECK_CD) {
+	if (port->flags & ASYNC_CHECK_CD) {
 		if (status)
-			wake_up_interruptible(&state->port.open_wait);
-		else if (state->port.tty)
-			tty_hangup(state->port.tty);
+			wake_up_interruptible(&port->open_wait);
+		else if (port->tty)
+			tty_hangup(port->tty);
 	}
 }
 
@@ -534,24 +524,24 @@ uart_handle_dcd_change(struct uart_port *port, unsigned int status)
  *	@status: new clear to send status, nonzero if active
  */
 static inline void
-uart_handle_cts_change(struct uart_port *port, unsigned int status)
+uart_handle_cts_change(struct uart_port *uport, unsigned int status)
 {
-	struct uart_state *state = port->state;
-	struct tty_struct *tty = state->port.tty;
+	struct tty_port *port = &uport->state->port;
+	struct tty_struct *tty = port->tty;
 
-	port->icount.cts++;
+	uport->icount.cts++;
 
-	if (state->flags & UIF_CTS_FLOW) {
+	if (port->flags & ASYNC_CTS_FLOW) {
 		if (tty->hw_stopped) {
 			if (status) {
 				tty->hw_stopped = 0;
-				port->ops->start_tx(port);
-				uart_write_wakeup(port);
+				uport->ops->start_tx(uport);
+				uart_write_wakeup(uport);
 			}
 		} else {
 			if (!status) {
 				tty->hw_stopped = 1;
-				port->ops->stop_tx(port);
+				uport->ops->stop_tx(uport);
 			}
 		}
 	}
-- 
1.6.4.2