mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* Current git fails to boot with VT-D enabled due to flood of DMAR errors
@ 2009-09-20  4:32 Robert Hancock
  2009-09-20  4:41 ` David Woodhouse
  0 siblings, 1 reply; 4+ messages in thread
From: Robert Hancock @ 2009-09-20  4:32 UTC (permalink / raw)
  To: linux-kernel; +Cc: David Woodhouse

On an Asus P7P55D Pro-based system (Lynnfield CPU), with Intel VT-d 
enabled in the BIOS, on 2.6.30.5 (the previous version I tested) I get 
these lines in dmesg:

DMAR:Host address width 36
DMAR:DRHD (flags: 0x00000001)base: 0x00000000fed90000
DMAR:RMRR base: 0x00000000000e4000 end: 0x00000000000e7fff
DMAR:RMRR base: 0x00000000bf7ec000 end: 0x00000000bf7fffff
Not all IO-APIC's listed under remapping hardware

In current -git, I get these lines as well, but then I get this:

DRHD: handling fault status reg ffffffff
DMAR:[DMA Read] Request device [ff:1f.7] fault addr fffffffffffff000
DMAR:[fault reason 255] Unknown

The last two lines repeat in a continuous flood and the system doesn't 
boot. This happens even if I pass "intel_iommu=off" (which seems like 
it's already the default).

Could be a kernel bug or a BIOS bug, but in the latter case we should 
probably deal with it better. The registers all reading FF seems like 
maybe the registers are disabled or something..

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2009-09-20  5:09 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-09-20  4:32 Current git fails to boot with VT-D enabled due to flood of DMAR errors Robert Hancock
2009-09-20  4:41 ` David Woodhouse
2009-09-20  4:46   ` Robert Hancock
2009-09-20  5:09     ` David Woodhouse

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®