startx broken on today's git tree

startx broken on today's git tree

[Xiaotian Feng]

[-- Attachment #1: Type: text/plain, Size: 431 bytes --]

Hi,

    I used today's git tree with FC11 configs plus some debug configs,
then I found my FC11 can not startx anymore...  Each time I run
startx, I'll get a Fatal error:

    (EE) Screen(s) found, but none have a usable configuration.

    Then from dmesg, I saw flood messages:

 [drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms
radeon_cp_getparam_kms

    Attach is my dmesg log, any ideas on this issue? Thank you.

[-- Attachment #2: dmesg_log --]
[-- Type: application/octet-stream, Size: 49841 bytes --]

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31 (root@danny) (gcc version 4.4.1 20090725 (Red Hat 4.4.1-2) (GCC) ) #103 SMP Tue Sep 22 10:30:02 CST 2009
Command line: ro root=UUID=7de2000c-7bed-471e-bfb9-01d4bef20eec rhgb quiet
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bfdffc00 (usable)
 BIOS-e820: 00000000bfdffc00 - 00000000bfe53c00 (ACPI NVS)
 BIOS-e820: 00000000bfe53c00 - 00000000bfe55c00 (ACPI data)
 BIOS-e820: 00000000bfe55c00 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
DMI 2.5 present.
last_pfn = 0x238000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0BFF00000 mask FFFF00000 uncachable
  1 base 0C0000000 mask FC0000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbfdff max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bfdff000
 0000000000 - 00bfc00000 page 2M
 00bfc00000 - 00bfdff000 page 4k
kernel direct mapping tables up to bfdff000 @ 8000-d000
init_memory_mapping: 0000000100000000-0000000238000000
 0100000000 - 0238000000 page 2M
kernel direct mapping tables up to 238000000 @ b000-15000
RAMDISK: 37ce5000 - 37fef473
ACPI: RSDP 00000000000fec00 00024 (v02 DELL  )
ACPI: XSDT 00000000000fc7ef 0006C (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: FACP 00000000000fc91f 000F4 (v03 DELL    B10K    00000015 ASL  00000061)
ACPI: DSDT 00000000fff1be4b 0536F (v01   DELL    dt_ex 00001000 INTL 20050624)
ACPI: FACS 00000000bfdffc00 00040
ACPI: SSDT 00000000fff212d9 000AA (v01   DELL    st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fca13 00092 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: BOOT 00000000000fcaa5 00028 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: ASF! 00000000000fcacd 00096 (v32 DELL    B10K    00000015 ASL  00000061)
ACPI: MCFG 00000000000fcb63 0003E (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: HPET 00000000000fcba1 00038 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: TCPA 00000000000fcdfd 00032 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: ____ 00000000000fce2f 00030 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000238000000
Bootmem setup node 0 0000000000000000-0000000238000000
  NODE_DATA [0000000000010000 - 0000000000024fff]
  bootmap [0000000000025000 -  000000000006bfff] pages 47
(8 early reservations) ==> bootmem [0000000000 - 0238000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 00020c1800]    TEXT DATA BSS ==> [0001000000 - 00020c1800]
  #3 [0037ce5000 - 0037fef473]          RAMDISK ==> [0037ce5000 - 0037fef473]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [00020c2000 - 00020c21a0]              BRK ==> [00020c2000 - 00020c21a0]
  #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #7 [000000b000 - 0000010000]          PGTABLE ==> [000000b000 - 0000010000]
found SMP MP-table at [ffff8800000fe710] fe710
 [ffffea0000000000-ffffea000c3fffff] PMD -> [ffff880028600000-ffff8800333fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00238000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x000bfdff
    0: 0x00100000 -> 0x00238000
On node 0 totalpages: 2063774
  DMA zone: 88 pages used for memmap
  DMA zone: 107 pages reserved
  DMA zone: 3804 pages, LIFO batch:0
  DMA32 zone: 22440 pages used for memmap
  DMA32 zone: 759383 pages, LIFO batch:31
  Normal zone: 27456 pages used for memmap
  Normal zone: 1250496 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bfdff000 - 00000000bfe00000
PM: Registered nosave memory: 00000000bfe00000 - 00000000bfe53000
PM: Registered nosave memory: 00000000bfe53000 - 00000000bfe54000
PM: Registered nosave memory: 00000000bfe54000 - 00000000bfe55000
PM: Registered nosave memory: 00000000bfe55000 - 00000000bfe56000
PM: Registered nosave memory: 00000000bfe56000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000
PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91160 r8192 d23528 u262144
pcpu-alloc: s91160 r8192 d23528 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2013683
Policy zone: Normal
Kernel command line: ro root=UUID=7de2000c-7bed-471e-bfb9-01d4bef20eec rhgb quiet
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 7988996k/9306112k available (4545k kernel code, 1051016k absent, 266100k reserved, 2829k data, 1580k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:472
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     16384
... MAX_LOCKDEP_CHAINS:      32768
... CHAINHASH_SIZE:          16384
 memory used by lock dependency info: 5823 kB
 per task-struct memory footprint: 1920 bytes
allocated 82575360 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
  alloc irq_desc for 24 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 25 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 26 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 27 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 28 on node 0
  alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2659.917 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.83 BogoMIPS (lpj=2659917)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20090521
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22159 entries in 87 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz stepping 0a
lockdep: fixing up alternatives.
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5319.73 BogoMIPS (lpj=2659866)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
lockdep: fixing up alternatives.
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5319.73 BogoMIPS (lpj=2659867)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 2/0x2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
mce: CPU supports 6 MCE banks
CPU2: Thermal monitoring enabled (TM2)
CPU2: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
lockdep: fixing up alternatives.
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5319.73 BogoMIPS (lpj=2659865)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU 3/0x3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
mce: CPU supports 6 MCE banks
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Core(TM)2 Quad CPU    Q9400  @ 2.66GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (21279.03 BogoMIPS).
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
  domain 1: span 0-3 level CPU
   groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
  domain 1: span 0-3 level CPU
   groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
CPU2 attaching sched-domain:
 domain 0: span 2-3 level MC
  groups: 2 3
  domain 1: span 0-3 level CPU
   groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
CPU3 attaching sched-domain:
 domain 0: span 2-3 level MC
  groups: 3 2
  domain 1: span 0-3 level CPU
   groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
devtmpfs: initialized
regulator: core version 0.5
Time: 10:33:57  Date: 09/22/09
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F 20090521 tbutils-246
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: reg 10 64bit mmio: [0xfeda6000-0xfeda600f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: reg 10 io port: [0xfe80-0xfe87]
pci 0000:00:03.2: reg 14 io port: [0xfe90-0xfe93]
pci 0000:00:03.2: reg 18 io port: [0xfea0-0xfea7]
pci 0000:00:03.2: reg 1c io port: [0xfeb0-0xfeb3]
pci 0000:00:03.2: reg 20 io port: [0xfef0-0xfeff]
pci 0000:00:03.3: reg 10 io port: [0xec98-0xec9f]
pci 0000:00:03.3: reg 14 32bit mmio: [0xfebd8000-0xfebd8fff]
pci 0000:00:19.0: reg 10 32bit mmio: [0xfebe0000-0xfebfffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xfebd9000-0xfebd9fff]
pci 0000:00:19.0: reg 18 io port: [0xecc0-0xecdf]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f]
pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f]
pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebda000-0xfebda3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebdc000-0xfebdffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980000-0xff9803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfecf]
pci 0000:00:1f.2: reg 24 io port: [0xeca0-0xecaf]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfebdb000-0xfebdb0ff]
pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
pci 0000:00:1f.5: reg 10 io port: [0xfe40-0xfe47]
pci 0000:00:1f.5: reg 14 io port: [0xfe50-0xfe53]
pci 0000:00:1f.5: reg 18 io port: [0xfe60-0xfe67]
pci 0000:00:1f.5: reg 1c io port: [0xfe70-0xfe73]
pci 0000:00:1f.5: reg 20 io port: [0xfed0-0xfedf]
pci 0000:00:1f.5: reg 24 io port: [0xecb0-0xecbf]
pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9f0000-0xfe9fffff]
pci 0000:01:00.0: reg 20 io port: [0xdc00-0xdcff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfea00000-0xfea1ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI Warning: \_SB_.PCI0.PCI2._PRT: Return Package has no elements (empty) 20090521 nspredef-434
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
Switching to clocksource tsc
Switched to high resolution mode on CPU 3
Switched to high resolution mode on CPU 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x800-0x85f has been reserved
system 00:01: ioport range 0xc00-0xc7f has been reserved
system 00:01: ioport range 0x860-0x8ff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xd000-0xdfff
pci 0000:00:01.0:   MEM window: 0xfe900000-0xfeafffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
pci 0000:00:1c.0:   MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000c0000000-0x000000c01fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: 0x2000-0x2fff
pci 0000:00:1c.1:   MEM window: 0xfe700000-0xfe7fffff
pci 0000:00:1c.1:   PREFETCH window: 0x000000c0200000-0x000000c03fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfeafffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:02: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xc01fffff]
pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0xfe700000-0xfe7fffff]
pci_bus 0000:03: resource 2 pref mem [0xc0200000-0xc03fffff]
pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3113k freed
Simple Boot Flag at 0x7a set to 0x80
Initializing RT-Tester: OK
audit: initializing netlink socket (disabled)
type=2000 audit(1253615640.150:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15609
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
pcieport-driver 0000:00:01.0: irq 29 for MSI/MSI-X
pcieport-driver 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.0: irq 30 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 31 on node -1
  alloc kstat_irqs on node -1
pcieport-driver 0000:00:1c.1: irq 31 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [VBTN]
Monitor-Mwait will be used to enter C-1 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ata_piix 0000:00:1f.2: version 2.13
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 18
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 18
ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 18
ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 18
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfebda000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'TKIP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'WEP'

Linux kernel driver for RTL8192 based WLAN cards
Copyright (c) 2007-2008, Realsil Wlan
VIA Networking Wireless LAN USB Driver 1.19_12
usbcore: registered new interface driver vt6656
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
kmemleak: Kernel memory leak detector initialized
kmemleak: Automatic memory scanning thread started
  Magic number: 9:759:578
platform pcspkr: hash matches
Initalizing network drop monitor service
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
usb 3-2: new low speed USB device using uhci_hcd and address 2
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 300)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 300)
ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653G, D200, max UDMA/100
ata2.00: applying bridge limits
ata1.00: ATA-8: Hitachi HDP725032GLA360, GM3OA5BA, max UDMA/133
ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDP72503 GM3O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-H653G D200 PQ: 0 ANSI: 5
 sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1580k freed
Write protecting the kernel read-only data: 6584k
usb 3-2: New USB device found, idVendor=413c, idProduct=3012
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Dell USB Optical Mouse
usb 3-2: Manufacturer: Dell
usb 3-2: configuration #1 chosen from 1 choice
input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input3
generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.0-2/input0
usb 4-2: new low speed USB device using uhci_hcd and address 2
usb 4-2: New USB device found, idVendor=413c, idProduct=2106
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Dell QuietKey Keyboard
usb 4-2: Manufacturer: Dell
usb 4-2: configuration #1 chosen from 1 choice
input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
generic-usb 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1a.1-2/input0
pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:03.2: setting latency timer to 64
pata_acpi 0000:00:03.2: PCI INT C disabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
type=1404 audit(1253615642.710:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 128912 rules.
SELinux: 8192 avtab hash slots, 128912 rules.
SELinux:  8 users, 11 roles, 2768 types, 129 bools, 1 sens, 1024 cats
SELinux:  74 classes, 128912 rules
SELinux:  class tun_socket not defined in policy
SELinux:  permission module_request in class system not defined in policy
SELinux: the above unknown classes and permissions will be allowed
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda5, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), not configured for labeling
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1253615646.621:3): policy loaded auid=4294967295 ses=4294967295
udev: starting version 141
ACPI: WMI: Mapper loaded
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
e1000e 0000:00:19.0: setting latency timer to 64
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:ae:98:ce:24
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 8021ff-0ff
input: PC Speaker as /devices/platform/pcspkr/input/input5
type=1400 audit(1253615652.110:4): avc:  denied  { associate } for  pid=342 comm="modprobe" name="event5" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH10D TCO device (Version=2, TCOBASE=0x0860)
type=1400 audit(1253615652.447:5): avc:  denied  { associate } for  pid=266 comm="modprobe" name="watchdog" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
type=1400 audit(1253615652.647:6): avc:  denied  { associate } for  pid=861 comm="modprobe" name="parport0" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
ppdev: user-space parallel port driver
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
type=1400 audit(1253615652.775:7): avc:  denied  { associate } for  pid=217 comm="modprobe" name="snd" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] Initialized drm 1.1.0 20060810
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
type=1400 audit(1253615653.958:8): avc:  denied  { associate } for  pid=217 comm="modprobe" name="event6" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
type=1400 audit(1253615653.962:9): avc:  denied  { associate } for  pid=217 comm="modprobe" name="snd" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
type=1400 audit(1253615653.963:10): avc:  denied  { associate } for  pid=217 comm="modprobe" name="snd" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
type=1400 audit(1253615653.963:11): avc:  denied  { associate } for  pid=217 comm="modprobe" name="snd" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
type=1400 audit(1253615653.963:12): avc:  denied  { associate } for  pid=217 comm="modprobe" name="snd" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xFE9F0000
[drm] register mmio size: 65536
ATOM BIOS: 113
[drm] Clocks initialized !
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone  kernel: Available graphics memory: 3996846 kiB.
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RV670 CP Microcode
platform radeon_cp.0: firmware: requesting radeon/RV670_pfp.bin
platform radeon_cp.0: firmware: requesting radeon/RV670_me.bin
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] radeon: kernel modesetting successfully initialized.
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   DVI-I
[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[drm] Connector 1:
[drm]   DVI-I
[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm]     CRT2: INTERNAL_KLDSCP_DAC2
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 7257600
[drm] fb depth is 24
[drm]    pitch is 6912
executing set pll
executing set crtc timing
[drm] TV-9: set mode 1680x1050 1c
Console: switching to colour frame buffer device 210x65
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
device-mapper: multipath: version 1.1.0 loaded
EXT3 FS on sda5, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 10241428k swap on /dev/sda3.  Priority:-1 extents:1 across:10241428k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
platform microcode: firmware: requesting intel-ucode/06-17-0a
__ratelimit: 15 callbacks suppressed
type=1400 audit(1253615659.145:18): avc:  denied  { associate } for  pid=1157 comm="modprobe" name="microcode" scontext=system_u:object_r:unlabeled_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
eth0: no IPv6 routers present
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
kmemleak: 169 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
[drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms radeon_cp_getparam_kms
kmemleak: 7 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

Re: startx broken on today's git tree

[Peter Zijlstra]

On Tue, 2009-09-22 at 19:12 +0800, Xiaotian Feng wrote:
> Hi,
> 
>     I used today's git tree with FC11 configs plus some debug configs,
> then I found my FC11 can not startx anymore...  Each time I run
> startx, I'll get a Fatal error:
> 
>     (EE) Screen(s) found, but none have a usable configuration.
> 
>     Then from dmesg, I saw flood messages:
> 
>  [drm:radeon_cp_getparam_kms] *ERROR* invalid ioctl with kms
> radeon_cp_getparam_kms
> 
>     Attach is my dmesg log, any ideas on this issue? Thank you.

Disable radeon KMS, or upgrade your xorg radeon driver.

I don't think F11 includes a new enough radeon driver for KMS to work.