From: Tim Abbott <tabbott@ksplice.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Sam Ravnborg <sam@ravnborg.org>,
Geoffrey Thomas <geofft@ksplice.com>,
Tim Abbott <tabbott@ksplice.com>,
Ivan Kokshaysky <ink@jurassic.park.msu.ru>,
Richard Henderson <rth@twiddle.net>
Subject: [PATCH v2 11/11] alpha: Clean up linker script using new linker script macros.
Date: Thu, 24 Sep 2009 10:36:26 -0400 [thread overview]
Message-ID: <1253802986-8132-12-git-send-email-tabbott@ksplice.com> (raw)
In-Reply-To: <1253802986-8132-1-git-send-email-tabbott@ksplice.com>
From: Geoffrey Thomas <geofft@ksplice.com>
Note that .data.page_aligned and .data.cacheline_aligned are now after
_data; it was probably a bug that they were before it.
Also, some explicit ALIGN(8)'s between various initcall sections were
removed; this should be harmless as the implicit alignment of
initcall_t was already 8.
Signed-off-by: Geoffrey Thomas <geofft@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
---
arch/alpha/kernel/vmlinux.lds.S | 90 ++++-----------------------------------
1 files changed, 9 insertions(+), 81 deletions(-)
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 82803df..2906665 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -32,84 +32,21 @@ SECTIONS
} :kernel
RODATA
-
- /* Exception table */
- . = ALIGN(16);
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(16)
/* Will be freed after init */
- . = ALIGN(PAGE_SIZE);
- /* Init code and data */
- __init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : {
- INIT_DATA
- }
-
- . = ALIGN(16);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
-
- . = ALIGN(8);
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
-
- . = ALIGN(8);
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
-
- . = ALIGN(8);
- SECURITY_INIT
-
+ __init_begin = ALIGN(PAGE_SIZE);
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
PERCPU(PAGE_SIZE)
-
- . = ALIGN(2 * PAGE_SIZE);
+ /* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
+ needed for the THREAD_SIZE aligned init_task gets freed after init */
+ . = ALIGN(THREAD_SIZE);
__init_end = .;
/* Freed after init ends here */
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
- *(.data.page_aligned)
- }
-
- . = ALIGN(64);
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
-
_data = .;
- /* Data */
- .data : {
- INIT_TASK_DATA(THREAD_SIZE)
- DATA_DATA
- CONSTRUCTORS
- }
+ RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
.got : {
*(.got)
@@ -119,16 +56,7 @@ SECTIONS
}
_edata = .; /* End of data section */
- __bss_start = .;
- .sbss : {
- *(.sbss)
- *(.scommon)
- }
- .bss : {
- *(.bss)
- *(COMMON)
- }
- __bss_stop = .;
+ BSS_SECTION(0, 0, 0)
_end = .;
.mdebug 0 : {
--
1.6.3.3
prev parent reply other threads:[~2009-09-24 14:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-24 14:36 [PATCH v2 00/11] Linker script cleanups for various architectures Tim Abbott
2009-09-24 14:36 ` [PATCH v2 01/11] Optimize the ordering of sections in RW_DATA_SECTION Tim Abbott
2009-09-24 14:36 ` [PATCH v2 02/11] parisc: Clean up linker script using new linker script macros Tim Abbott
2009-09-24 14:36 ` [PATCH v2 03/11] parisc: Remove useless altinstructions code copied from x86 Tim Abbott
2009-09-24 14:36 ` [PATCH v2 04/11] xtensa: Cleanup linker script using new linker script macros Tim Abbott
2009-09-24 14:36 ` [PATCH v2 05/11] um: Clean up linker script using standard macros Tim Abbott
2009-09-24 14:36 ` [PATCH v2 06/11] h8300: Cleanup linker script using new linker script macros Tim Abbott
2009-09-24 14:36 ` [PATCH v2 07/11] mn10300: Clean up linker script using higher-level macros Tim Abbott
2009-09-24 14:36 ` [PATCH v2 08/11] blackfin: Cleanup linker script using new linker script macros Tim Abbott
2009-09-24 14:36 ` [PATCH v2 09/11] powerpc: " Tim Abbott
2009-09-24 14:36 ` [PATCH v2 10/11] alpha: use .data.init_task instead of .data.init_thread Tim Abbott
2009-09-24 14:36 ` Tim Abbott [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1253802986-8132-12-git-send-email-tabbott@ksplice.com \
--to=tabbott@ksplice.com \
--cc=geofft@ksplice.com \
--cc=ink@jurassic.park.msu.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=rth@twiddle.net \
--cc=sam@ravnborg.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®