mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
To: alsa-devel@alsa-project.org, linux-omap@vger.kernel.org,
	sameo@linux.intel.com
Cc: linux-kernel@vger.kernel.org, tony@atomide.com,
	broonie@opensource.wolfsonmicro.com
Subject: [PATCH 5/5] ASoC: TWL4030: Do not modify the APLL_CTL register
Date: Mon,  2 Nov 2009 14:34:55 +0200	[thread overview]
Message-ID: <1257165295-9352-6-git-send-email-peter.ujfalusi@nokia.com> (raw)
In-Reply-To: <1257165295-9352-5-git-send-email-peter.ujfalusi@nokia.com>

APLL_CTL register is configured by the twl4030-codec MFD
driver.
Remove code, which makes changes in the APLL_CTL register,
and replace those with checks against the configured
audio_mclk configuration done in the MFD driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
---
 sound/soc/codecs/twl4030.c |   69 ++++++++++++++++---------------------------
 1 files changed, 26 insertions(+), 43 deletions(-)

diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index c0b47df..67cde72 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -214,7 +214,8 @@ static void twl4030_init_chip(struct snd_soc_codec *codec)
 
 	/* set all audio section registers to reasonable defaults */
 	for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++)
-		twl4030_write(codec, i,	cache[i]);
+		if (i != TWL4030_REG_APLL_CTL)
+			twl4030_write(codec, i,	cache[i]);
 
 }
 
@@ -1753,30 +1754,23 @@ static int twl4030_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
 	struct twl4030_priv *twl4030 = codec->private_data;
-	u8 apll_ctrl;
 
-	apll_ctrl = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL);
-	apll_ctrl &= ~TWL4030_APLL_INFREQ;
 	switch (freq) {
 	case 19200000:
-		apll_ctrl |= TWL4030_APLL_INFREQ_19200KHZ;
-		twl4030->sysclk = 19200;
-		break;
 	case 26000000:
-		apll_ctrl |= TWL4030_APLL_INFREQ_26000KHZ;
-		twl4030->sysclk = 26000;
-		break;
 	case 38400000:
-		apll_ctrl |= TWL4030_APLL_INFREQ_38400KHZ;
-		twl4030->sysclk = 38400;
 		break;
 	default:
-		printk(KERN_ERR "TWL4030 set sysclk: unknown rate %d\n",
-			freq);
+		dev_err(codec->dev, "Unsupported frequency %u\n", freq);
 		return -EINVAL;
 	}
 
-	twl4030_write(codec, TWL4030_REG_APLL_CTL, apll_ctrl);
+	if ((freq / 1000) != twl4030->sysclk) {
+		dev_err(codec->dev,
+			"Mismatch in APLL infrequency %u (configred: %u)\n",
+			freq, twl4030->sysclk * 1000);
+		return -EINVAL;
+	}
 
 	return 0;
 }
@@ -1874,16 +1868,13 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
-	u8 infreq;
+	struct twl4030_priv *twl4030 = codec->private_data;
 	u8 mode;
 
 	/* If the system master clock is not 26MHz, the voice PCM interface is
 	 * not avilable.
 	 */
-	infreq = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL)
-		& TWL4030_APLL_INFREQ;
-
-	if (infreq != TWL4030_APLL_INFREQ_26000KHZ) {
+	if (twl4030->sysclk != 26000) {
 		printk(KERN_ERR "TWL4030 voice startup: "
 			"MCLK is not 26MHz, call set_sysclk() on init\n");
 		return -EINVAL;
@@ -1958,22 +1949,18 @@ static int twl4030_voice_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 		int clk_id, unsigned int freq, int dir)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
-	u8 apll_ctrl;
+	struct twl4030_priv *twl4030 = codec->private_data;
 
-	apll_ctrl = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL);
-	apll_ctrl &= ~TWL4030_APLL_INFREQ;
-	switch (freq) {
-	case 26000000:
-		apll_ctrl |= TWL4030_APLL_INFREQ_26000KHZ;
-		break;
-	default:
-		printk(KERN_ERR "TWL4030 voice set sysclk: unknown rate %d\n",
-			freq);
+	if (freq != 26000000) {
+		dev_err(codec->dev, "Unsupported frequency %u\n", freq);
+		return -EINVAL;
+	}
+	if ((freq / 1000) != twl4030->sysclk) {
+		dev_err(codec->dev,
+			"Mismatch in APLL infrequency %u (configred: %u)\n",
+			freq, twl4030->sysclk * 1000);
 		return -EINVAL;
 	}
-
-	twl4030_write(codec, TWL4030_REG_APLL_CTL, apll_ctrl);
-
 	return 0;
 }
 
@@ -2131,17 +2118,14 @@ static int twl4030_soc_probe(struct platform_device *pdev)
 	if (setup) {
 		unsigned char hs_pop;
 
-		if (setup->sysclk)
-			twl4030->sysclk = setup->sysclk;
-		else
-			twl4030->sysclk = 26000;
+		if (setup->sysclk != twl4030->sysclk)
+			dev_warn(&pdev->dev, "sysclk mismatch (%u vs %u)\n",
+				 twl4030->sysclk, setup->sysclk);
 
 		hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
 		hs_pop &= ~TWL4030_RAMP_DELAY;
 		hs_pop |= (setup->ramp_delay_value << 2);
 		twl4030_write_reg_cache(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
-	} else {
-		twl4030->sysclk = 26000;
 	}
 
 	/* register pcms */
@@ -2191,10 +2175,8 @@ static int __devinit twl4030_codec_probe(struct platform_device *pdev)
 	struct twl4030_priv *twl4030;
 	int ret;
 
-	if (!pdata || !(pdata->audio_mclk == 19200000 ||
-			pdata->audio_mclk == 26000000 ||
-			pdata->audio_mclk == 38400000)) {
-		dev_err(&pdev->dev, "Invalid platform_data\n");
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform_data is missing\n");
 		return -EINVAL;
 	}
 
@@ -2233,6 +2215,7 @@ static int __devinit twl4030_codec_probe(struct platform_device *pdev)
 	twl4030_codec = codec;
 
 	/* Set the defaults, and power up the codec */
+	twl4030->sysclk = twl4030_codec_get_mclk() / 1000;
 	twl4030_init_chip(codec);
 	codec->bias_level = SND_SOC_BIAS_OFF;
 	twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-- 
1.6.5.2


  reply	other threads:[~2009-11-02 12:35 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-11-02 12:34 [PATCH 0/5] ASoC/MFD/OMAP: TWL4030: APLL_CTL handling change Peter Ujfalusi
2009-11-02 12:34 ` [PATCH 1/5] MFD: TWL4030: Add audio_mclk to the codec platform data Peter Ujfalusi
2009-11-02 12:34   ` [PATCH 2/5] OMAP: Configure audio_mclk for twl4030-codec MFD Peter Ujfalusi
2009-11-02 12:34     ` [PATCH 3/5] MFD: twl4030-codec: APLL_INFREQ handling in the MFD driver Peter Ujfalusi
2009-11-02 12:34       ` [PATCH 4/5] ASoC: TWL4030: Make sure, that the codec is powered on startup Peter Ujfalusi
2009-11-02 12:34         ` Peter Ujfalusi [this message]
2009-11-02 17:27           ` [PATCH 5/5] ASoC: TWL4030: Do not modify the APLL_CTL register Mark Brown
2009-11-03 14:05             ` Peter Ujfalusi
2009-11-02 17:28         ` [PATCH 4/5] ASoC: TWL4030: Make sure, that the codec is powered on startup Mark Brown
2009-11-02 17:30       ` [PATCH 3/5] MFD: twl4030-codec: APLL_INFREQ handling in the MFD driver Mark Brown
2009-11-03 13:37         ` Peter Ujfalusi
2009-11-03 13:44           ` Mark Brown
2009-11-03 14:02             ` Peter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1257165295-9352-6-git-send-email-peter.ujfalusi@nokia.com \
    --to=peter.ujfalusi@nokia.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®