From: Arnd Bergmann <arnd@arndb.de>
To: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
David Miller <davem@davemloft.net>,
Stephen Hemminger <shemminger@vyatta.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Patrick Mullaney <pmullaney@novell.com>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Edge Virtual Bridging <evb@yahoogroups.com>,
Anna Fischer <anna.fischer@hp.com>,
bridge@lists.linux-foundation.org,
virtualization@lists.linux-foundation.org,
Jens Osterkamp <jens@linux.vnet.ibm.com>,
Gerhard Stenzel <gerhard.stenzel@de.ibm.com>,
Patrick McHardy <kaber@trash.net>,
Mark Smith <lk-netdev@lk-netdev.nosense.org>,
Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH 1/4] veth: move loopback logic to common location
Date: Tue, 24 Nov 2009 00:56:03 +0000 [thread overview]
Message-ID: <1259024166-28158-2-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1259024166-28158-1-git-send-email-arnd@arndb.de>
The veth driver contains code to forward an skb
from the start_xmit function of one network
device into the receive path of another device.
Moving that code into a common location lets us
reuse the code for direct forwarding of data
between macvlan ports, and possibly in other
drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/veth.c | 17 +++--------------
include/linux/netdevice.h | 2 ++
net/core/dev.c | 36 ++++++++++++++++++++++++++++++++++++
3 files changed, 41 insertions(+), 14 deletions(-)
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 2d657f2..6c4b5a2 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -155,8 +155,6 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)
struct veth_net_stats *stats, *rcv_stats;
int length, cpu;
- skb_orphan(skb);
-
priv = netdev_priv(dev);
rcv = priv->peer;
rcv_priv = netdev_priv(rcv);
@@ -168,20 +166,12 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)
if (!(rcv->flags & IFF_UP))
goto tx_drop;
- if (skb->len > (rcv->mtu + MTU_PAD))
- goto rx_drop;
-
- skb->tstamp.tv64 = 0;
- skb->pkt_type = PACKET_HOST;
- skb->protocol = eth_type_trans(skb, rcv);
if (dev->features & NETIF_F_NO_CSUM)
skb->ip_summed = rcv_priv->ip_summed;
- skb->mark = 0;
- secpath_reset(skb);
- nf_reset(skb);
-
- length = skb->len;
+ length = skb->len + ETH_HLEN;
+ if (dev_forward_skb(rcv, skb) != NET_RX_SUCCESS)
+ goto rx_drop;
stats->tx_bytes += length;
stats->tx_packets++;
@@ -189,7 +179,6 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)
rcv_stats->rx_bytes += length;
rcv_stats->rx_packets++;
- netif_rx(skb);
return NETDEV_TX_OK;
tx_drop:
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 97873e3..9428793 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1562,6 +1562,8 @@ extern int dev_set_mac_address(struct net_device *,
extern int dev_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev,
struct netdev_queue *txq);
+extern int dev_forward_skb(struct net_device *dev,
+ struct sk_buff *skb);
extern int netdev_budget;
diff --git a/net/core/dev.c b/net/core/dev.c
index ccefa24..ba18e82 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -105,6 +105,7 @@
#include <net/dst.h>
#include <net/pkt_sched.h>
#include <net/checksum.h>
+#include <net/xfrm.h>
#include <linux/highmem.h>
#include <linux/init.h>
#include <linux/kmod.h>
@@ -1419,6 +1420,41 @@ static inline void net_timestamp(struct sk_buff *skb)
skb->tstamp.tv64 = 0;
}
+/**
+ * dev_forward_skb - loopback an skb to another netif
+ *
+ * @dev: destination network device
+ * @skb: buffer to forward
+ *
+ * return values:
+ * NET_RX_SUCCESS (no congestion)
+ * NET_RX_DROP (packet was dropped)
+ *
+ * dev_forward_skb can be used for injecting an skb from the
+ * start_xmit function of one device into the receive queue
+ * of another device.
+ */
+int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
+{
+ skb_orphan(skb);
+
+ if (!(dev->flags & IFF_UP))
+ return NET_RX_DROP;
+
+ if (skb->len > (dev->mtu + dev->hard_header_len))
+ return NET_RX_DROP;
+
+ skb_dst_drop(skb);
+ skb->tstamp.tv64 = 0;
+ skb->pkt_type = PACKET_HOST;
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->mark = 0;
+ secpath_reset(skb);
+ nf_reset(skb);
+ return netif_rx(skb);
+}
+EXPORT_SYMBOL_GPL(dev_forward_skb);
+
/*
* Support routine. Sends outgoing frames to any network
* taps currently in use.
--
1.6.3.3
next prev parent reply other threads:[~2009-11-24 0:56 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-24 0:56 [PATCHv2 0/4] macvlan: add vepa and bridge mode Arnd Bergmann
2009-11-24 0:56 ` Arnd Bergmann [this message]
2009-11-24 9:51 ` [PATCH 1/4] veth: move loopback logic to common location Patrick McHardy
2009-11-24 10:02 ` Arnd Bergmann
2009-11-24 10:17 ` Patrick McHardy
2009-11-24 10:34 ` Arnd Bergmann
2009-11-24 10:40 ` Patrick McHardy
2009-11-24 13:13 ` Arnd Bergmann
2009-11-24 16:42 ` Eric W. Biederman
2009-11-24 16:56 ` Patrick McHardy
2009-11-24 18:10 ` Eric W. Biederman
2009-11-24 18:28 ` Arnd Bergmann
2009-11-24 18:38 ` Patrick McHardy
2009-11-26 15:21 ` Arnd Bergmann
2009-11-26 15:33 ` Patrick McHardy
2009-11-26 16:38 ` Eric W. Biederman
2009-11-26 17:44 ` Arnd Bergmann
2009-11-26 21:14 ` Patrick McHardy
2009-11-24 0:56 ` [PATCH 2/4] macvlan: cleanup rx statistics Arnd Bergmann
2009-11-24 8:15 ` Eric Dumazet
2009-11-24 8:45 ` Arnd Bergmann
2009-11-24 9:28 ` Arnd Bergmann
2009-11-24 10:41 ` Patrick McHardy
2009-11-24 0:56 ` [PATCH 3/4] macvlan: implement bridge, VEPA and private mode Arnd Bergmann
2009-11-24 10:42 ` Patrick McHardy
2009-11-24 12:45 ` Arnd Bergmann
2009-11-24 0:56 ` [PATCH 4/4] macvlan: export macvlan mode through netlink Arnd Bergmann
2009-11-24 10:53 ` Patrick McHardy
2009-11-24 12:57 ` Arnd Bergmann
2009-11-24 13:47 ` Patrick McHardy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259024166-28158-2-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=anna.fischer@hp.com \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=ebiederm@xmission.com \
--cc=eric.dumazet@gmail.com \
--cc=evb@yahoogroups.com \
--cc=gerhard.stenzel@de.ibm.com \
--cc=herbert@gondor.apana.org.au \
--cc=jens@linux.vnet.ibm.com \
--cc=kaber@trash.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lk-netdev@lk-netdev.nosense.org \
--cc=netdev@vger.kernel.org \
--cc=pmullaney@novell.com \
--cc=shemminger@vyatta.com \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®