From: Arnd Bergmann <arnd@arndb.de>
To: Arnd Bergmann <arnd@arndb.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
David Miller <davem@davemloft.net>,
Stephen Hemminger <shemminger@vyatta.com>,
Herbert Xu <herbert@gondor.apana.org.au>,
Patrick Mullaney <pmullaney@novell.com>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Edge Virtual Bridging <evb@yahoogroups.com>,
Anna Fischer <anna.fischer@hp.com>,
bridge@lists.linux-foundation.org,
virtualization@lists.linux-foundation.org,
Jens Osterkamp <jens@linux.vnet.ibm.com>,
Gerhard Stenzel <gerhard.stenzel@de.ibm.com>,
Patrick McHardy <kaber@trash.net>,
Mark Smith <lk-netdev@lk-netdev.nosense.org>,
Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH 2/4] macvlan: cleanup rx statistics
Date: Tue, 24 Nov 2009 00:56:04 +0000 [thread overview]
Message-ID: <1259024166-28158-3-git-send-email-arnd@arndb.de> (raw)
In-Reply-To: <1259024166-28158-1-git-send-email-arnd@arndb.de>
We have very similar code for rx statistics in
two places in the macvlan driver, with a third
one being added in the next patch.
Consolidate them into one function to improve
overall readability of the driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/net/macvlan.c | 63 +++++++++++++++++++++++++-----------------------
1 files changed, 33 insertions(+), 30 deletions(-)
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index ae2b5c7..a0dea23 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -116,42 +116,53 @@ static int macvlan_addr_busy(const struct macvlan_port *port,
return 0;
}
+static inline void macvlan_count_rx(const struct macvlan_dev *vlan, int length,
+ int success, int multicast)
+{
+ struct macvlan_rx_stats *rx_stats;
+
+ rx_stats = per_cpu_ptr(vlan->rx_stats, smp_processor_id());
+ rx_stats->rx_packets += success != 0;
+ rx_stats->rx_bytes += success ? length : 0;
+ rx_stats->multicast += success && multicast;
+ rx_stats->rx_errors += !success;
+}
+
+static int macvlan_broadcast_one(struct sk_buff *skb, struct net_device *dev,
+ const struct ethhdr *eth)
+{
+ if (!skb)
+ return NET_RX_DROP;
+
+ skb->dev = dev;
+ if (!compare_ether_addr_64bits(eth->h_dest,
+ dev->broadcast))
+ skb->pkt_type = PACKET_BROADCAST;
+ else
+ skb->pkt_type = PACKET_MULTICAST;
+
+ return netif_rx(skb);
+}
+
static void macvlan_broadcast(struct sk_buff *skb,
const struct macvlan_port *port)
{
const struct ethhdr *eth = eth_hdr(skb);
const struct macvlan_dev *vlan;
struct hlist_node *n;
- struct net_device *dev;
struct sk_buff *nskb;
unsigned int i;
- struct macvlan_rx_stats *rx_stats;
+ int err;
if (skb->protocol == htons(ETH_P_PAUSE))
return;
for (i = 0; i < MACVLAN_HASH_SIZE; i++) {
hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) {
- dev = vlan->dev;
- rx_stats = per_cpu_ptr(vlan->rx_stats, smp_processor_id());
-
nskb = skb_clone(skb, GFP_ATOMIC);
- if (nskb == NULL) {
- rx_stats->rx_errors++;
- continue;
- }
-
- rx_stats->rx_bytes += skb->len + ETH_HLEN;
- rx_stats->rx_packets++;
- rx_stats->multicast++;
-
- nskb->dev = dev;
- if (!compare_ether_addr_64bits(eth->h_dest, dev->broadcast))
- nskb->pkt_type = PACKET_BROADCAST;
- else
- nskb->pkt_type = PACKET_MULTICAST;
-
- netif_rx(nskb);
+ err = macvlan_broadcast_one(nskb, vlan->dev, eth);
+ macvlan_count_rx(vlan, skb->len + ETH_HLEN,
+ likely(err == NET_RX_SUCCESS), 1);
}
}
}
@@ -163,7 +174,6 @@ static struct sk_buff *macvlan_handle_frame(struct sk_buff *skb)
const struct macvlan_port *port;
const struct macvlan_dev *vlan;
struct net_device *dev;
- struct macvlan_rx_stats *rx_stats;
port = rcu_dereference(skb->dev->macvlan_port);
if (port == NULL)
@@ -183,15 +193,8 @@ static struct sk_buff *macvlan_handle_frame(struct sk_buff *skb)
kfree_skb(skb);
return NULL;
}
- rx_stats = per_cpu_ptr(vlan->rx_stats, smp_processor_id());
skb = skb_share_check(skb, GFP_ATOMIC);
- if (skb == NULL) {
- rx_stats->rx_errors++;
- return NULL;
- }
-
- rx_stats->rx_bytes += skb->len + ETH_HLEN;
- rx_stats->rx_packets++;
+ macvlan_count_rx(vlan, skb->len + ETH_HLEN, likely(skb != NULL), 0);
skb->dev = dev;
skb->pkt_type = PACKET_HOST;
--
1.6.3.3
next prev parent reply other threads:[~2009-11-24 0:57 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-24 0:56 [PATCHv2 0/4] macvlan: add vepa and bridge mode Arnd Bergmann
2009-11-24 0:56 ` [PATCH 1/4] veth: move loopback logic to common location Arnd Bergmann
2009-11-24 9:51 ` Patrick McHardy
2009-11-24 10:02 ` Arnd Bergmann
2009-11-24 10:17 ` Patrick McHardy
2009-11-24 10:34 ` Arnd Bergmann
2009-11-24 10:40 ` Patrick McHardy
2009-11-24 13:13 ` Arnd Bergmann
2009-11-24 16:42 ` Eric W. Biederman
2009-11-24 16:56 ` Patrick McHardy
2009-11-24 18:10 ` Eric W. Biederman
2009-11-24 18:28 ` Arnd Bergmann
2009-11-24 18:38 ` Patrick McHardy
2009-11-26 15:21 ` Arnd Bergmann
2009-11-26 15:33 ` Patrick McHardy
2009-11-26 16:38 ` Eric W. Biederman
2009-11-26 17:44 ` Arnd Bergmann
2009-11-26 21:14 ` Patrick McHardy
2009-11-24 0:56 ` Arnd Bergmann [this message]
2009-11-24 8:15 ` [PATCH 2/4] macvlan: cleanup rx statistics Eric Dumazet
2009-11-24 8:45 ` Arnd Bergmann
2009-11-24 9:28 ` Arnd Bergmann
2009-11-24 10:41 ` Patrick McHardy
2009-11-24 0:56 ` [PATCH 3/4] macvlan: implement bridge, VEPA and private mode Arnd Bergmann
2009-11-24 10:42 ` Patrick McHardy
2009-11-24 12:45 ` Arnd Bergmann
2009-11-24 0:56 ` [PATCH 4/4] macvlan: export macvlan mode through netlink Arnd Bergmann
2009-11-24 10:53 ` Patrick McHardy
2009-11-24 12:57 ` Arnd Bergmann
2009-11-24 13:47 ` Patrick McHardy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1259024166-28158-3-git-send-email-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=anna.fischer@hp.com \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=ebiederm@xmission.com \
--cc=eric.dumazet@gmail.com \
--cc=evb@yahoogroups.com \
--cc=gerhard.stenzel@de.ibm.com \
--cc=herbert@gondor.apana.org.au \
--cc=jens@linux.vnet.ibm.com \
--cc=kaber@trash.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lk-netdev@lk-netdev.nosense.org \
--cc=netdev@vger.kernel.org \
--cc=pmullaney@novell.com \
--cc=shemminger@vyatta.com \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®