mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Jesse Barnes <jbarnes@virtuousgeek.org>,
	Christoph Lameter <cl@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 11/25] x86/pci: enable pci root res read out for 32bit too
Date: Tue, 22 Dec 2009 15:40:49 -0800	[thread overview]
Message-ID: <1261525263-13763-12-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1261525263-13763-1-git-send-email-yinghai@kernel.org>

should be good for 32bit too.

-v3: cast res->start

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
 arch/x86/pci/Makefile    |    3 +--
 arch/x86/pci/amd_bus.c   |   14 +-------------
 arch/x86/pci/bus_numa.h  |    4 ++--
 arch/x86/pci/i386.c      |    4 ----
 arch/x86/pci/intel_bus.c |    2 +-
 5 files changed, 5 insertions(+), 22 deletions(-)

diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 564b008..30e55d7 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -14,8 +14,7 @@ obj-$(CONFIG_X86_VISWS)		+= visws.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 
 obj-y				+= common.o early.o
-obj-y				+= amd_bus.o
-obj-$(CONFIG_X86_64)		+= bus_numa.o intel_bus.o
+obj-y				+= amd_bus.o bus_numa.o intel_bus.o
 
 ifeq ($(CONFIG_PCI_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 9bcb6fe..ef4b3e7 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -6,9 +6,7 @@
 
 #include <asm/pci_x86.h>
 
-#ifdef CONFIG_X86_64
 #include <asm/pci-direct.h>
-#endif
 
 #include "bus_numa.h"
 
@@ -17,8 +15,6 @@
  * also get peer root bus resource for io,mmio
  */
 
-#ifdef CONFIG_X86_64
-
 struct pci_hostbridge_probe {
 	u32 bus;
 	u32 slot;
@@ -342,21 +338,13 @@ static int __init early_fill_mp_bus_info(void)
 			printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n",
 			       busnum, j,
 			       (res->flags & IORESOURCE_IO)?"io port":"mmio",
-			       res->start, res->end);
+			       (u64)res->start, (u64)res->end);
 		}
 	}
 
 	return 0;
 }
 
-#else  /* !CONFIG_X86_64 */
-
-static int __init early_fill_mp_bus_info(void) { return 0; }
-
-#endif /* !CONFIG_X86_64 */
-
-/* common 32/64 bit code */
-
 #define ENABLE_CF8_EXT_CFG      (1ULL << 46)
 
 static void enable_pci_io_ecs(void *unused)
diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h
index f63e802..08d8e15 100644
--- a/arch/x86/pci/bus_numa.h
+++ b/arch/x86/pci/bus_numa.h
@@ -1,5 +1,5 @@
-#ifdef CONFIG_X86_64
-
+#ifndef __BUS_NUMA_H
+#define __BUS_NUMA_H
 /*
  * sub bus (transparent) will use entres from 3 to store extra from
  * root, so need to make sure we have enough slot there, Should we
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 5dc9e8c..f4e8481 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -257,10 +257,6 @@ void __init pcibios_resource_survey(void)
  */
 fs_initcall(pcibios_assign_resources);
 
-void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b)
-{
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c
index 1f15df9..6167be9 100644
--- a/arch/x86/pci/intel_bus.c
+++ b/arch/x86/pci/intel_bus.c
@@ -30,7 +30,7 @@ static inline void print_ioh_resources(struct pci_root_info *info)
 			busnum, i,
 			(res->flags & IORESOURCE_IO) ? "io port" :
 							"mmio",
-			res->start, res->end);
+			(u64)res->start, (u64)res->end);
 	}
 }
 
-- 
1.6.0.2


  parent reply	other threads:[~2009-12-22 23:42 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-22 23:40 [PATCH -v2 0/25] x86: use early_res instead of bootmem before slab Yinghai Lu
2009-12-22 23:40 ` [PATCH 01/25] x86: fix size for ex trampoline with 32bit Yinghai Lu
2010-01-04 21:42   ` [tip:x86/urgent] x86: Fix " tip-bot for Yinghai Lu
2009-12-22 23:40 ` [PATCH 02/25] x86/pci: intel ioh bus num reg accessing fix Yinghai Lu
2010-01-04 21:42   ` [tip:x86/urgent] x86/pci: Intel " tip-bot for Yinghai Lu
2009-12-22 23:40 ` [PATCH 03/25] bootmem: move out map assigning out of loop Yinghai Lu
2009-12-22 23:40 ` [PATCH 04/25] x86/pci: don't check mmconf again if it is from MSR with amd faml0h Yinghai Lu
2009-12-22 23:40 ` [PATCH 05/25] x86: move range related operation to one file Yinghai Lu
2009-12-22 23:40 ` [PATCH 06/25] x86: check range in update range Yinghai Lu
2009-12-22 23:40 ` [PATCH 07/25] x86/pci: use resource_size_t in update_res Yinghai Lu
2009-12-22 23:40 ` [PATCH 08/25] x86/pci: amd one chain system to use pci read out res Yinghai Lu
2009-12-22 23:40 ` [PATCH 09/25] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2009-12-22 23:40 ` [PATCH 10/25] x86/pci: add cap_resource Yinghai Lu
2009-12-22 23:40 ` Yinghai Lu [this message]
2009-12-22 23:40 ` [PATCH 12/25] x86: call early_res_to_bootmem one time Yinghai Lu
2009-12-22 23:40 ` [PATCH 13/25] x86: introduce max_early_res and early_res_count Yinghai Lu
2009-12-22 23:40 ` [PATCH 14/25] x86: dynamic increase early_res array size Yinghai Lu
2009-12-22 23:40 ` [PATCH 15/25] x86: print bootmem free before pci_iommu_alloc and free_all_bootmem Yinghai Lu
2009-12-22 23:40 ` [PATCH 16/25] x86: make early_node_mem get mem > 4g if possible Yinghai Lu
2009-12-22 23:40 ` [PATCH 17/25] x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA Yinghai Lu
2009-12-22 23:40 ` [PATCH 18/25] x86: make 64 bit use early_res instead of bootmem before slab Yinghai Lu
2009-12-22 23:40 ` [PATCH 19/25] sparsemem: put usemap for one node together Yinghai Lu
2009-12-22 23:40 ` [PATCH 20/25] sparsemem: put mem map " Yinghai Lu
2009-12-22 23:40 ` [PATCH 21/25] x86: change range end to start+size Yinghai Lu
2009-12-22 23:41 ` [PATCH 22/25] x86: move bios page reserve early to head32/64.c Yinghai Lu
2009-12-22 23:41 ` [PATCH 23/25] x86: seperate early_res related code from e820.c Yinghai Lu
2009-12-22 23:41 ` [PATCH 24/25] x86: add find_early_area_size Yinghai Lu
2009-12-22 23:41 ` [PATCH 25/25] x86: move back find_e820_area to e820.c Yinghai Lu
2010-01-04 17:48 ` [PATCH -v2 0/25] x86: use early_res instead of bootmem before slab Christoph Lameter
2010-01-04 21:13   ` Yinghai Lu
2010-01-04 21:19     ` Christoph Lameter
2010-01-04 21:23       ` Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1261525263-13763-12-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=cl@linux-foundation.org \
    --cc=hpa@zytor.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome