From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>,
Christoph Lameter <cl@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>,
stable@kernel.org
Subject: [PATCH 01/35] x86: fix sci on ioapic 1
Date: Tue, 09 Feb 2010 11:32:12 -0800 [thread overview]
Message-ID: <1265743966-17065-2-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1265743966-17065-1-git-send-email-yinghai@kernel.org>
Thomas Renninger <trenn@suse.de> reported on IBM x3330
booting a latest kernel on this machine results in:
PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1
PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0
ACPI: SCI (IRQ30) allocation failed
ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20090903/evevent-161)
ACPI: Unable to start the ACPI Interpreter
Later all kind of devices fail...
and bisect it down to this commit:
commit b9c61b70075c87a8612624736faf4a2de5b1ed30
x86/pci: update pirq_enable_irq() to setup io apic routing
it turns out we need to set irq routing for the sci on ioapic1 early.
-v2: make it work without sparseirq too.
-v3: fix checkpatch.pl warning, and cc to stable
Reported-by: Thomas Renninger <trenn@suse.de>
Bisected-by: Thomas Renninger <trenn@suse.de>
Tested-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
---
arch/x86/include/asm/io_apic.h | 1 +
arch/x86/kernel/acpi/boot.c | 9 ++++++-
arch/x86/kernel/apic/io_apic.c | 50 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 59 insertions(+), 1 deletions(-)
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 7c7c16c..5f61f6e 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -160,6 +160,7 @@ extern int io_apic_get_redir_entries(int ioapic);
struct io_apic_irq_attr;
extern int io_apic_set_pci_routing(struct device *dev, int irq,
struct io_apic_irq_attr *irq_attr);
+void setup_IO_APIC_irq_extra(u32 gsi);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
extern void ioapic_insert_resources(void);
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 036d28a..6083bfa 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -446,6 +446,12 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
{
*irq = gsi;
+
+#ifdef CONFIG_X86_IO_APIC
+ if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
+ setup_IO_APIC_irq_extra(gsi);
+#endif
+
return 0;
}
@@ -473,7 +479,8 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
}
#endif
- acpi_gsi_to_irq(plat_gsi, &irq);
+ irq = plat_gsi;
+
return irq;
}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 75ba3d0..ee2fba1 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1541,6 +1541,56 @@ static void __init setup_IO_APIC_irqs(void)
}
/*
+ * for the gsit that is not in first ioapic
+ * but could not use acpi_register_gsi()
+ * like some special sci in IBM x3330
+ */
+void setup_IO_APIC_irq_extra(u32 gsi)
+{
+ int apic_id = 0, pin, idx, irq;
+ int node = cpu_to_node(boot_cpu_id);
+ struct irq_desc *desc;
+ struct irq_cfg *cfg;
+
+ /*
+ * Convert 'gsi' to 'ioapic.pin'.
+ */
+ apic_id = mp_find_ioapic(gsi);
+ if (apic_id < 0)
+ return;
+
+ pin = mp_find_ioapic_pin(apic_id, gsi);
+ idx = find_irq_entry(apic_id, pin, mp_INT);
+ if (idx == -1)
+ return;
+
+ irq = pin_2_irq(idx, apic_id, pin);
+#ifdef CONFIG_SPARSE_IRQ
+ desc = irq_to_desc(irq);
+ if (desc)
+ return;
+#endif
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+ return;
+ }
+
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, apic_id, pin);
+
+ if (test_bit(pin, mp_ioapic_routing[apic_id].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[apic_id].apicid, pin);
+ return;
+ }
+ set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed);
+
+ setup_IO_APIC_irq(apic_id, pin, irq, desc,
+ irq_trigger(idx), irq_polarity(idx));
+}
+
+/*
* Set up the timer pin, possibly with the 8259A-master behind.
*/
static void __init setup_timer_IRQ0_pin(unsigned int apic_id, unsigned int pin,
--
1.6.4.2
next prev parent reply other threads:[~2010-02-09 19:33 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-09 19:32 [PATCH -v6 0/35] x86: not use bootmem for x86 Yinghai Lu
2010-02-09 19:32 ` Yinghai Lu [this message]
2010-02-09 19:32 ` [PATCH 02/35] x86: move range related operation to one file Yinghai Lu
2010-02-09 19:32 ` [PATCH 03/35] x86/pci: use resource_size_t in update_res Yinghai Lu
2010-02-09 19:32 ` [PATCH 04/35] x86/pci: amd one chain system to use pci read out res Yinghai Lu
2010-02-09 19:54 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 05/35] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2010-02-09 19:32 ` [PATCH 06/35] x86/pci: add cap_resource Yinghai Lu
2010-02-09 19:56 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 07/35] x86/pci: enable pci root res read out for 32bit too Yinghai Lu
2010-02-09 19:32 ` [PATCH 08/35] x86: change range end to start+size Yinghai Lu
2010-02-09 19:32 ` [PATCH 09/35] x86: print out for RAM buffer Yinghai Lu
2010-02-09 19:52 ` Andrew Morton
2010-02-10 21:19 ` H. Peter Anvin
2010-02-09 19:32 ` [PATCH 10/35] x86: call early_res_to_bootmem one time Yinghai Lu
2010-02-09 19:32 ` [PATCH 11/35] x86: introduce max_early_res and early_res_count Yinghai Lu
2010-02-09 19:32 ` [PATCH 12/35] x86: dynamic increase early_res array size Yinghai Lu
2010-02-09 19:32 ` [PATCH 13/35] x86: make early_node_mem get mem > 4g if possible Yinghai Lu
2010-02-09 19:32 ` [PATCH 14/35] x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA Yinghai Lu
2010-02-09 19:32 ` [PATCH 15/35] x86: make 64 bit use early_res instead of bootmem before slab Yinghai Lu
2010-02-09 20:26 ` Andrew Morton
2010-02-09 21:37 ` Yinghai Lu
2010-02-09 21:45 ` H. Peter Anvin
2010-02-09 21:47 ` H. Peter Anvin
2010-02-09 22:33 ` Andrew Morton
2010-02-09 22:44 ` H. Peter Anvin
2010-02-09 20:30 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 16/35] sparsemem: put usemap for one node together Yinghai Lu
2010-02-09 19:32 ` [PATCH 17/35] sparsemem: put mem map " Yinghai Lu
2010-02-09 20:21 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 18/35] x86: move bios page reserve early to head32/64.c Yinghai Lu
2010-02-09 19:32 ` [PATCH 19/35] x86: seperate early_res related code from e820.c Yinghai Lu
2010-02-09 19:32 ` [PATCH 20/35] x86: add find_early_area_size Yinghai Lu
2010-02-09 19:32 ` [PATCH 21/35] x86: move back find_e820_area to e820.c Yinghai Lu
2010-02-09 20:15 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 22/35] early_res: enhance check_and_double_early_res Yinghai Lu
2010-02-09 19:32 ` [PATCH 23/35] x86: make 32bit support NO_BOOTMEM Yinghai Lu
2010-02-09 20:03 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 24/35] move round_up/down to kernel.h Yinghai Lu
2010-02-09 19:32 ` [PATCH 25/35] x86: add find_fw_memmap_area Yinghai Lu
2010-02-09 19:32 ` [PATCH 26/35] core: move early_res Yinghai Lu
2010-02-09 19:32 ` [PATCH 27/35] irq: remove not need bootmem code Yinghai Lu
2010-02-09 19:32 ` [PATCH 28/35] radix: move radix init early Yinghai Lu
2010-02-09 19:49 ` Andrew Morton
2010-02-09 19:56 ` Pekka Enberg
2010-02-10 0:16 ` Yinghai Lu
2010-02-10 10:05 ` Pekka Enberg
2010-02-11 5:29 ` Benjamin Herrenschmidt
2010-02-09 19:32 ` [PATCH 29/35] sparseirq: change irq_desc_ptrs to static Yinghai Lu
2010-02-09 19:32 ` [PATCH 30/35] sparseirq: use radix_tree instead of ptrs array Yinghai Lu
2010-02-09 19:32 ` [PATCH 31/35] x86: remove arch_probe_nr_irqs Yinghai Lu
2010-02-09 19:32 ` [PATCH 32/35] use nr_cpus= to set nr_cpu_ids early Yinghai Lu
2010-02-09 20:05 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 33/35] x86: according to nr_cpu_ids to decide if need to leave logical flat Yinghai Lu
2010-02-09 19:32 ` [PATCH 34/35] x86: make 32bit apic flat to physflat switch like 64bit Yinghai Lu
2010-02-09 19:32 ` [PATCH 35/35] x86: use num_processors for possible cpus Yinghai Lu
2010-02-10 9:20 [PATCH -v7 0/35] tip related: not use bootmem for x86 Yinghai Lu
2010-02-10 9:20 ` [PATCH 01/35] x86: fix sci on ioapic 1 Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1265743966-17065-2-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cl@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=stable@kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome