From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>,
Christoph Lameter <cl@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH 23/35] x86: make 32bit support NO_BOOTMEM
Date: Tue, 09 Feb 2010 11:32:34 -0800 [thread overview]
Message-ID: <1265743966-17065-24-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1265743966-17065-1-git-send-email-yinghai@kernel.org>
let's make 32bit consistent with 64bit
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/Kconfig | 1 -
arch/x86/kernel/early_res.c | 3 +++
arch/x86/mm/init_32.c | 6 ++++++
arch/x86/mm/numa_32.c | 3 +++
4 files changed, 12 insertions(+), 1 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a6fedb8..24c2908 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -571,7 +571,6 @@ config PARAVIRT_DEBUG
config NO_BOOTMEM
default y
bool "Disable Bootmem code"
- depends on X86_64
---help---
use early_res directly instead of bootmem before slab is ready.
diff --git a/arch/x86/kernel/early_res.c b/arch/x86/kernel/early_res.c
index 52804e9..38a0c61 100644
--- a/arch/x86/kernel/early_res.c
+++ b/arch/x86/kernel/early_res.c
@@ -354,6 +354,9 @@ int __init get_free_all_memory_range(struct range **rangep, int nodeid)
/* need to go over early_node_map to find out good range for node */
nr_range = add_from_early_node_map(range, count, nr_range, nodeid);
+#ifdef CONFIG_X86_32
+ subtract_range(range, count, max_low_pfn, -1UL);
+#endif
subtract_early_res(range, count);
nr_range = clean_sort_range(range, count);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 2dccde0..262867a 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -748,6 +748,7 @@ static void __init zone_sizes_init(void)
free_area_init_nodes(max_zone_pfns);
}
+#ifndef CONFIG_NO_BOOTMEM
static unsigned long __init setup_node_bootmem(int nodeid,
unsigned long start_pfn,
unsigned long end_pfn,
@@ -767,9 +768,11 @@ static unsigned long __init setup_node_bootmem(int nodeid,
return bootmap + bootmap_size;
}
+#endif
void __init setup_bootmem_allocator(void)
{
+#ifndef CONFIG_NO_BOOTMEM
int nodeid;
unsigned long bootmap_size, bootmap;
/*
@@ -781,11 +784,13 @@ void __init setup_bootmem_allocator(void)
if (bootmap == -1L)
panic("Cannot find bootmem map of size %ld\n", bootmap_size);
reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP");
+#endif
printk(KERN_INFO " mapped low ram: 0 - %08lx\n",
max_pfn_mapped<<PAGE_SHIFT);
printk(KERN_INFO " low ram: 0 - %08lx\n", max_low_pfn<<PAGE_SHIFT);
+#ifndef CONFIG_NO_BOOTMEM
for_each_online_node(nodeid) {
unsigned long start_pfn, end_pfn;
@@ -803,6 +808,7 @@ void __init setup_bootmem_allocator(void)
bootmap = setup_node_bootmem(nodeid, start_pfn, end_pfn,
bootmap);
}
+#endif
after_bootmem = 1;
}
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index b20760c..809baaa 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -418,7 +418,10 @@ void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
for_each_online_node(nid) {
memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+ NODE_DATA(nid)->node_id = nid;
+#ifndef CONFIG_NO_BOOTMEM
NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
+#endif
}
setup_bootmem_allocator();
--
1.6.4.2
next prev parent reply other threads:[~2010-02-09 19:34 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-09 19:32 [PATCH -v6 0/35] x86: not use bootmem for x86 Yinghai Lu
2010-02-09 19:32 ` [PATCH 01/35] x86: fix sci on ioapic 1 Yinghai Lu
2010-02-09 19:32 ` [PATCH 02/35] x86: move range related operation to one file Yinghai Lu
2010-02-09 19:32 ` [PATCH 03/35] x86/pci: use resource_size_t in update_res Yinghai Lu
2010-02-09 19:32 ` [PATCH 04/35] x86/pci: amd one chain system to use pci read out res Yinghai Lu
2010-02-09 19:54 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 05/35] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2010-02-09 19:32 ` [PATCH 06/35] x86/pci: add cap_resource Yinghai Lu
2010-02-09 19:56 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 07/35] x86/pci: enable pci root res read out for 32bit too Yinghai Lu
2010-02-09 19:32 ` [PATCH 08/35] x86: change range end to start+size Yinghai Lu
2010-02-09 19:32 ` [PATCH 09/35] x86: print out for RAM buffer Yinghai Lu
2010-02-09 19:52 ` Andrew Morton
2010-02-10 21:19 ` H. Peter Anvin
2010-02-09 19:32 ` [PATCH 10/35] x86: call early_res_to_bootmem one time Yinghai Lu
2010-02-09 19:32 ` [PATCH 11/35] x86: introduce max_early_res and early_res_count Yinghai Lu
2010-02-09 19:32 ` [PATCH 12/35] x86: dynamic increase early_res array size Yinghai Lu
2010-02-09 19:32 ` [PATCH 13/35] x86: make early_node_mem get mem > 4g if possible Yinghai Lu
2010-02-09 19:32 ` [PATCH 14/35] x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA Yinghai Lu
2010-02-09 19:32 ` [PATCH 15/35] x86: make 64 bit use early_res instead of bootmem before slab Yinghai Lu
2010-02-09 20:26 ` Andrew Morton
2010-02-09 21:37 ` Yinghai Lu
2010-02-09 21:45 ` H. Peter Anvin
2010-02-09 21:47 ` H. Peter Anvin
2010-02-09 22:33 ` Andrew Morton
2010-02-09 22:44 ` H. Peter Anvin
2010-02-09 20:30 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 16/35] sparsemem: put usemap for one node together Yinghai Lu
2010-02-09 19:32 ` [PATCH 17/35] sparsemem: put mem map " Yinghai Lu
2010-02-09 20:21 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 18/35] x86: move bios page reserve early to head32/64.c Yinghai Lu
2010-02-09 19:32 ` [PATCH 19/35] x86: seperate early_res related code from e820.c Yinghai Lu
2010-02-09 19:32 ` [PATCH 20/35] x86: add find_early_area_size Yinghai Lu
2010-02-09 19:32 ` [PATCH 21/35] x86: move back find_e820_area to e820.c Yinghai Lu
2010-02-09 20:15 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 22/35] early_res: enhance check_and_double_early_res Yinghai Lu
2010-02-09 19:32 ` Yinghai Lu [this message]
2010-02-09 20:03 ` [PATCH 23/35] x86: make 32bit support NO_BOOTMEM Andrew Morton
2010-02-09 19:32 ` [PATCH 24/35] move round_up/down to kernel.h Yinghai Lu
2010-02-09 19:32 ` [PATCH 25/35] x86: add find_fw_memmap_area Yinghai Lu
2010-02-09 19:32 ` [PATCH 26/35] core: move early_res Yinghai Lu
2010-02-09 19:32 ` [PATCH 27/35] irq: remove not need bootmem code Yinghai Lu
2010-02-09 19:32 ` [PATCH 28/35] radix: move radix init early Yinghai Lu
2010-02-09 19:49 ` Andrew Morton
2010-02-09 19:56 ` Pekka Enberg
2010-02-10 0:16 ` Yinghai Lu
2010-02-10 10:05 ` Pekka Enberg
2010-02-11 5:29 ` Benjamin Herrenschmidt
2010-02-09 19:32 ` [PATCH 29/35] sparseirq: change irq_desc_ptrs to static Yinghai Lu
2010-02-09 19:32 ` [PATCH 30/35] sparseirq: use radix_tree instead of ptrs array Yinghai Lu
2010-02-09 19:32 ` [PATCH 31/35] x86: remove arch_probe_nr_irqs Yinghai Lu
2010-02-09 19:32 ` [PATCH 32/35] use nr_cpus= to set nr_cpu_ids early Yinghai Lu
2010-02-09 20:05 ` Andrew Morton
2010-02-09 19:32 ` [PATCH 33/35] x86: according to nr_cpu_ids to decide if need to leave logical flat Yinghai Lu
2010-02-09 19:32 ` [PATCH 34/35] x86: make 32bit apic flat to physflat switch like 64bit Yinghai Lu
2010-02-09 19:32 ` [PATCH 35/35] x86: use num_processors for possible cpus Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1265743966-17065-24-git-send-email-yinghai@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=cl@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome