From: Avi Kivity <avi@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 16/38] KVM: Add a helper for checking if the guest is in protected mode
Date: Tue, 16 Feb 2010 12:35:14 +0200 [thread overview]
Message-ID: <1266316536-28936-17-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1266316536-28936-1-git-send-email-avi@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
arch/x86/kvm/emulate.c | 9 ++++-----
arch/x86/kvm/vmx.c | 4 ++--
arch/x86/kvm/x86.c | 7 +++----
arch/x86/kvm/x86.h | 6 ++++++
4 files changed, 15 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 48c7f9f..6a429ee 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -32,6 +32,7 @@
#include <linux/module.h>
#include <asm/kvm_emulate.h>
+#include "x86.h"
#include "mmu.h" /* for is_long_mode() */
/*
@@ -1515,7 +1516,7 @@ emulate_syscall(struct x86_emulate_ctxt *ctxt)
/* syscall is not available in real mode */
if (c->lock_prefix || ctxt->mode == X86EMUL_MODE_REAL
- || !kvm_read_cr0_bits(ctxt->vcpu, X86_CR0_PE))
+ || !is_protmode(ctxt->vcpu))
return -1;
setup_syscalls_segments(ctxt, &cs, &ss);
@@ -1568,8 +1569,7 @@ emulate_sysenter(struct x86_emulate_ctxt *ctxt)
return -1;
/* inject #GP if in real mode or paging is disabled */
- if (ctxt->mode == X86EMUL_MODE_REAL ||
- !kvm_read_cr0_bits(ctxt->vcpu, X86_CR0_PE)) {
+ if (ctxt->mode == X86EMUL_MODE_REAL || !is_protmode(ctxt->vcpu)) {
kvm_inject_gp(ctxt->vcpu, 0);
return -1;
}
@@ -1634,8 +1634,7 @@ emulate_sysexit(struct x86_emulate_ctxt *ctxt)
return -1;
/* inject #GP if in real mode or paging is disabled */
- if (ctxt->mode == X86EMUL_MODE_REAL
- || !kvm_read_cr0_bits(ctxt->vcpu, X86_CR0_PE)) {
+ if (ctxt->mode == X86EMUL_MODE_REAL || !is_protmode(ctxt->vcpu)) {
kvm_inject_gp(ctxt->vcpu, 0);
return -1;
}
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index fad871c..2e89495 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1845,7 +1845,7 @@ static void vmx_get_segment(struct kvm_vcpu *vcpu,
static int vmx_get_cpl(struct kvm_vcpu *vcpu)
{
- if (!kvm_read_cr0_bits(vcpu, X86_CR0_PE)) /* if real mode */
+ if (!is_protmode(vcpu))
return 0;
if (vmx_get_rflags(vcpu) & X86_EFLAGS_VM) /* if virtual 8086 */
@@ -2100,7 +2100,7 @@ static bool cs_ss_rpl_check(struct kvm_vcpu *vcpu)
static bool guest_state_valid(struct kvm_vcpu *vcpu)
{
/* real mode guest state checks */
- if (!kvm_read_cr0_bits(vcpu, X86_CR0_PE)) {
+ if (!is_protmode(vcpu)) {
if (!rmode_segment_valid(vcpu, VCPU_SREG_CS))
return false;
if (!rmode_segment_valid(vcpu, VCPU_SREG_SS))
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 4db0c8a..a4a7d18 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3786,8 +3786,7 @@ int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
* hypercall generates UD from non zero cpl and real mode
* per HYPER-V spec
*/
- if (kvm_x86_ops->get_cpl(vcpu) != 0 ||
- !kvm_read_cr0_bits(vcpu, X86_CR0_PE)) {
+ if (kvm_x86_ops->get_cpl(vcpu) != 0 || !is_protmode(vcpu)) {
kvm_queue_exception(vcpu, UD_VECTOR);
return 0;
}
@@ -4751,7 +4750,7 @@ int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
{
struct kvm_segment kvm_seg;
- if (is_vm86_segment(vcpu, seg) || !(kvm_read_cr0_bits(vcpu, X86_CR0_PE)))
+ if (is_vm86_segment(vcpu, seg) || !is_protmode(vcpu))
return kvm_load_realmode_segment(vcpu, selector, seg);
if (load_segment_descriptor_to_kvm_desct(vcpu, selector, &kvm_seg))
return 1;
@@ -5103,7 +5102,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
/* Older userspace won't unhalt the vcpu on reset. */
if (kvm_vcpu_is_bsp(vcpu) && kvm_rip_read(vcpu) == 0xfff0 &&
sregs->cs.selector == 0xf000 && sregs->cs.base == 0xffff0000 &&
- !(kvm_read_cr0_bits(vcpu, X86_CR0_PE)))
+ !is_protmode(vcpu))
vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
vcpu_put(vcpu);
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 5eadea5..f783d8f 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -2,6 +2,7 @@
#define ARCH_X86_KVM_X86_H
#include <linux/kvm_host.h>
+#include "kvm_cache_regs.h"
static inline void kvm_clear_exception_queue(struct kvm_vcpu *vcpu)
{
@@ -35,4 +36,9 @@ static inline bool kvm_exception_is_soft(unsigned int nr)
struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
u32 function, u32 index);
+static inline bool is_protmode(struct kvm_vcpu *vcpu)
+{
+ return kvm_read_cr0_bits(vcpu, X86_CR0_PE);
+}
+
#endif
--
1.6.5.3
next prev parent reply other threads:[~2010-02-16 10:41 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-16 10:34 [PATCH 00/38] KVM updates for the 2.6.34 merge window (batch 3/4) Avi Kivity
2010-02-16 10:34 ` [PATCH 01/38] KVM: export <asm/hyperv.h> Avi Kivity
2010-02-16 10:35 ` [PATCH 02/38] KVM: VMX: Remove emulation failure report Avi Kivity
2010-02-16 10:35 ` [PATCH 03/38] KVM: fix Hyper-V hypercall warnings and wrong mask value Avi Kivity
2010-02-16 10:35 ` [PATCH 04/38] KVM: fix cleanup_srcu_struct on vm destruction Avi Kivity
2010-02-16 10:35 ` [PATCH 05/38] KVM: x86: Use macros for x86_emulate_ops to avoid future mistakes Avi Kivity
2010-02-16 10:35 ` [PATCH 06/38] KVM: VMX: Fix exceptions of mov to dr Avi Kivity
2010-02-16 10:35 ` [PATCH 07/38] KVM: VMX: Fix emulation of DR4 and DR5 Avi Kivity
2010-02-16 10:35 ` [PATCH 08/38] KVM: VMX: Clean up DR6 emulation Avi Kivity
2010-02-16 10:35 ` [PATCH 09/38] KVM: SVM: Clean up and enhance mov dr emulation Avi Kivity
2010-02-16 10:35 ` [PATCH 10/38] KVM: SVM: Trap all debug register accesses Avi Kivity
2010-02-16 10:35 ` [PATCH 11/38] KVM: Fix kvm_coalesced_mmio_ring duplicate allocation Avi Kivity
2010-02-16 10:35 ` [PATCH 12/38] KVM: x86: fix checking of cr0 validity Avi Kivity
2010-02-16 10:35 ` [PATCH 13/38] KVM: Allow kvm_load_guest_fpu() even when !vcpu->fpu_active Avi Kivity
2010-02-16 10:35 ` [PATCH 14/38] KVM: Drop kvm_{load,put}_guest_fpu() exports Avi Kivity
2010-02-16 10:35 ` [PATCH 15/38] KVM: Activate fpu on clts Avi Kivity
2010-02-16 10:35 ` Avi Kivity [this message]
2010-02-16 10:35 ` [PATCH 17/38] KVM: Move cr0/cr4/efer related helpers to x86.h Avi Kivity
2010-02-16 10:35 ` [PATCH 18/38] KVM: Rename vcpu->shadow_efer to efer Avi Kivity
2010-02-16 10:35 ` [PATCH 19/38] KVM: Optimize kvm_read_cr[04]_bits() Avi Kivity
2010-02-16 10:35 ` [PATCH 20/38] KVM: trace guest fpu loads and unloads Avi Kivity
2010-02-16 10:35 ` [PATCH 21/38] KVM: MMU: Remove some useless code from alloc_mmu_pages() Avi Kivity
2010-02-16 10:35 ` [PATCH 22/38] KVM: PPC E500: Add register l1csr0 emulation Avi Kivity
2010-02-16 10:35 ` [PATCH 23/38] KVM: PPC: Add PVR/PIR init for E500 Avi Kivity
2010-02-16 10:35 ` [PATCH 24/38] KVM: PPC E500: fix tlbcfg emulation Avi Kivity
2010-02-16 10:35 ` [PATCH 25/38] KVM: VMX: Pass cr0.mp through to the guest when the fpu is active Avi Kivity
2010-02-16 10:35 ` [PATCH 26/38] KVM: mark segments accessed on HW task switch Avi Kivity
2010-02-16 10:35 ` [PATCH 27/38] KVM: Fix msr trace Avi Kivity
2010-02-16 10:35 ` [PATCH 28/38] KVM: Trace failed msr reads and writes Avi Kivity
2010-02-16 10:35 ` [PATCH 29/38] KVM: VMX: Remove redundant check in vm_need_virtualize_apic_accesses() Avi Kivity
2010-02-16 10:35 ` [PATCH 30/38] KVM: enable PCI multiple-segments for pass-through device Avi Kivity
2010-02-16 10:35 ` [PATCH 31/38] KVM: fix load_guest_segment_descriptor() to return X86EMUL_* Avi Kivity
2010-02-16 10:35 ` [PATCH 32/38] KVM: fix kvm_fix_hypercall() " Avi Kivity
2010-02-16 10:35 ` [PATCH 33/38] KVM: VMX: Wire up .fpu_activate() callback Avi Kivity
2010-02-16 10:35 ` [PATCH 34/38] KVM: ia64: Fix string literal continuation lines Avi Kivity
2010-02-16 10:35 ` [PATCH 35/38] KVM: VMX: Remove redundant test in vmx_set_efer() Avi Kivity
2010-02-16 10:35 ` [PATCH 36/38] KVM: Introduce kvm_host_page_size Avi Kivity
2010-02-16 10:35 ` [PATCH 37/38] KVM: VMX: emulate accessed bit for EPT Avi Kivity
2010-02-16 10:35 ` [PATCH 38/38] KVM: Remove redundant reading of rax on OUT instructions Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1266316536-28936-17-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome