From: Avi Kivity <avi@redhat.com>
To: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 30/38] KVM: enable PCI multiple-segments for pass-through device
Date: Tue, 16 Feb 2010 12:35:28 +0200 [thread overview]
Message-ID: <1266316536-28936-31-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1266316536-28936-1-git-send-email-avi@redhat.com>
From: Zhai, Edwin <edwin.zhai@intel.com>
Enable optional parameter (default 0) - PCI segment (or domain) besides
BDF, when assigning PCI device to guest.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
arch/x86/kvm/x86.c | 1 +
include/linux/kvm.h | 4 +++-
include/linux/kvm_host.h | 1 +
virt/kvm/assigned-dev.c | 4 +++-
virt/kvm/iommu.c | 9 ++++++---
5 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d47ceda..0bf3df5 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1569,6 +1569,7 @@ int kvm_dev_ioctl_check_extension(long ext)
case KVM_CAP_HYPERV:
case KVM_CAP_HYPERV_VAPIC:
case KVM_CAP_HYPERV_SPIN:
+ case KVM_CAP_PCI_SEGMENT:
r = 1;
break;
case KVM_CAP_COALESCED_MMIO:
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 4c4937e..dfa54be 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -500,6 +500,7 @@ struct kvm_ioeventfd {
#define KVM_CAP_HYPERV 44
#define KVM_CAP_HYPERV_VAPIC 45
#define KVM_CAP_HYPERV_SPIN 46
+#define KVM_CAP_PCI_SEGMENT 47
#ifdef KVM_CAP_IRQ_ROUTING
@@ -694,8 +695,9 @@ struct kvm_assigned_pci_dev {
__u32 busnr;
__u32 devfn;
__u32 flags;
+ __u32 segnr;
union {
- __u32 reserved[12];
+ __u32 reserved[11];
};
};
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index dfde04b..665c370 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -400,6 +400,7 @@ struct kvm_assigned_dev_kernel {
struct work_struct interrupt_work;
struct list_head list;
int assigned_dev_id;
+ int host_segnr;
int host_busnr;
int host_devfn;
unsigned int entries_nr;
diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c
index f51e684..057e2cc 100644
--- a/virt/kvm/assigned-dev.c
+++ b/virt/kvm/assigned-dev.c
@@ -526,7 +526,8 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm,
r = -ENOMEM;
goto out;
}
- dev = pci_get_bus_and_slot(assigned_dev->busnr,
+ dev = pci_get_domain_bus_and_slot(assigned_dev->segnr,
+ assigned_dev->busnr,
assigned_dev->devfn);
if (!dev) {
printk(KERN_INFO "%s: host device not found\n", __func__);
@@ -548,6 +549,7 @@ static int kvm_vm_ioctl_assign_device(struct kvm *kvm,
pci_reset_function(dev);
match->assigned_dev_id = assigned_dev->assigned_dev_id;
+ match->host_segnr = assigned_dev->segnr;
match->host_busnr = assigned_dev->busnr;
match->host_devfn = assigned_dev->devfn;
match->flags = assigned_dev->flags;
diff --git a/virt/kvm/iommu.c b/virt/kvm/iommu.c
index 65a5143..80fd3ad 100644
--- a/virt/kvm/iommu.c
+++ b/virt/kvm/iommu.c
@@ -106,7 +106,8 @@ int kvm_assign_device(struct kvm *kvm,
r = iommu_attach_device(domain, &pdev->dev);
if (r) {
- printk(KERN_ERR "assign device %x:%x.%x failed",
+ printk(KERN_ERR "assign device %x:%x:%x.%x failed",
+ pci_domain_nr(pdev->bus),
pdev->bus->number,
PCI_SLOT(pdev->devfn),
PCI_FUNC(pdev->devfn));
@@ -127,7 +128,8 @@ int kvm_assign_device(struct kvm *kvm,
goto out_unmap;
}
- printk(KERN_DEBUG "assign device: host bdf = %x:%x:%x\n",
+ printk(KERN_DEBUG "assign device %x:%x:%x.%x\n",
+ assigned_dev->host_segnr,
assigned_dev->host_busnr,
PCI_SLOT(assigned_dev->host_devfn),
PCI_FUNC(assigned_dev->host_devfn));
@@ -154,7 +156,8 @@ int kvm_deassign_device(struct kvm *kvm,
iommu_detach_device(domain, &pdev->dev);
- printk(KERN_DEBUG "deassign device: host bdf = %x:%x:%x\n",
+ printk(KERN_DEBUG "deassign device %x:%x:%x.%x\n",
+ assigned_dev->host_segnr,
assigned_dev->host_busnr,
PCI_SLOT(assigned_dev->host_devfn),
PCI_FUNC(assigned_dev->host_devfn));
--
1.6.5.3
next prev parent reply other threads:[~2010-02-16 10:36 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-16 10:34 [PATCH 00/38] KVM updates for the 2.6.34 merge window (batch 3/4) Avi Kivity
2010-02-16 10:34 ` [PATCH 01/38] KVM: export <asm/hyperv.h> Avi Kivity
2010-02-16 10:35 ` [PATCH 02/38] KVM: VMX: Remove emulation failure report Avi Kivity
2010-02-16 10:35 ` [PATCH 03/38] KVM: fix Hyper-V hypercall warnings and wrong mask value Avi Kivity
2010-02-16 10:35 ` [PATCH 04/38] KVM: fix cleanup_srcu_struct on vm destruction Avi Kivity
2010-02-16 10:35 ` [PATCH 05/38] KVM: x86: Use macros for x86_emulate_ops to avoid future mistakes Avi Kivity
2010-02-16 10:35 ` [PATCH 06/38] KVM: VMX: Fix exceptions of mov to dr Avi Kivity
2010-02-16 10:35 ` [PATCH 07/38] KVM: VMX: Fix emulation of DR4 and DR5 Avi Kivity
2010-02-16 10:35 ` [PATCH 08/38] KVM: VMX: Clean up DR6 emulation Avi Kivity
2010-02-16 10:35 ` [PATCH 09/38] KVM: SVM: Clean up and enhance mov dr emulation Avi Kivity
2010-02-16 10:35 ` [PATCH 10/38] KVM: SVM: Trap all debug register accesses Avi Kivity
2010-02-16 10:35 ` [PATCH 11/38] KVM: Fix kvm_coalesced_mmio_ring duplicate allocation Avi Kivity
2010-02-16 10:35 ` [PATCH 12/38] KVM: x86: fix checking of cr0 validity Avi Kivity
2010-02-16 10:35 ` [PATCH 13/38] KVM: Allow kvm_load_guest_fpu() even when !vcpu->fpu_active Avi Kivity
2010-02-16 10:35 ` [PATCH 14/38] KVM: Drop kvm_{load,put}_guest_fpu() exports Avi Kivity
2010-02-16 10:35 ` [PATCH 15/38] KVM: Activate fpu on clts Avi Kivity
2010-02-16 10:35 ` [PATCH 16/38] KVM: Add a helper for checking if the guest is in protected mode Avi Kivity
2010-02-16 10:35 ` [PATCH 17/38] KVM: Move cr0/cr4/efer related helpers to x86.h Avi Kivity
2010-02-16 10:35 ` [PATCH 18/38] KVM: Rename vcpu->shadow_efer to efer Avi Kivity
2010-02-16 10:35 ` [PATCH 19/38] KVM: Optimize kvm_read_cr[04]_bits() Avi Kivity
2010-02-16 10:35 ` [PATCH 20/38] KVM: trace guest fpu loads and unloads Avi Kivity
2010-02-16 10:35 ` [PATCH 21/38] KVM: MMU: Remove some useless code from alloc_mmu_pages() Avi Kivity
2010-02-16 10:35 ` [PATCH 22/38] KVM: PPC E500: Add register l1csr0 emulation Avi Kivity
2010-02-16 10:35 ` [PATCH 23/38] KVM: PPC: Add PVR/PIR init for E500 Avi Kivity
2010-02-16 10:35 ` [PATCH 24/38] KVM: PPC E500: fix tlbcfg emulation Avi Kivity
2010-02-16 10:35 ` [PATCH 25/38] KVM: VMX: Pass cr0.mp through to the guest when the fpu is active Avi Kivity
2010-02-16 10:35 ` [PATCH 26/38] KVM: mark segments accessed on HW task switch Avi Kivity
2010-02-16 10:35 ` [PATCH 27/38] KVM: Fix msr trace Avi Kivity
2010-02-16 10:35 ` [PATCH 28/38] KVM: Trace failed msr reads and writes Avi Kivity
2010-02-16 10:35 ` [PATCH 29/38] KVM: VMX: Remove redundant check in vm_need_virtualize_apic_accesses() Avi Kivity
2010-02-16 10:35 ` Avi Kivity [this message]
2010-02-16 10:35 ` [PATCH 31/38] KVM: fix load_guest_segment_descriptor() to return X86EMUL_* Avi Kivity
2010-02-16 10:35 ` [PATCH 32/38] KVM: fix kvm_fix_hypercall() " Avi Kivity
2010-02-16 10:35 ` [PATCH 33/38] KVM: VMX: Wire up .fpu_activate() callback Avi Kivity
2010-02-16 10:35 ` [PATCH 34/38] KVM: ia64: Fix string literal continuation lines Avi Kivity
2010-02-16 10:35 ` [PATCH 35/38] KVM: VMX: Remove redundant test in vmx_set_efer() Avi Kivity
2010-02-16 10:35 ` [PATCH 36/38] KVM: Introduce kvm_host_page_size Avi Kivity
2010-02-16 10:35 ` [PATCH 37/38] KVM: VMX: emulate accessed bit for EPT Avi Kivity
2010-02-16 10:35 ` [PATCH 38/38] KVM: Remove redundant reading of rax on OUT instructions Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1266316536-28936-31-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome