mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ira W. Snyder" <iws@ovro.caltech.edu>
To: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org, sameo@linux.intel.com,
	socketcan-core@lists.berlios.de
Subject: [PATCH 0/3] add support for Janz MODULbus devices
Date: Thu, 18 Mar 2010 09:38:41 -0700	[thread overview]
Message-ID: <1268930324-29841-1-git-send-email-iws@ovro.caltech.edu> (raw)
In-Reply-To: <>

This patch series adds support for the Janz CMOD-IO carrier board, as well
as the Janz VMOD-ICAN3 Intelligent CAN controller and the Janz VMOD-TTL
Digital IO controller. The CMOD-IO carrier board is a PCI to MODULbus
bridge, into which plug MODULbus daughterboards.  I only have access to two
types of daughtercards, the VMOD-ICAN3 and VMOD-TTL boards mentioned above.

The CAN driver has been tested under high loads. I am able to generate ~60%
bus utilization. With two VMOD-ICAN3 boards looped back to each other,
neither one loses any packets when only a single board is generating
packets at maximum speed. Once both boards start generating packets, one
board will sometimes loose arbitration, and cause some lost packets.

RFCv3 -> RFCv4:
- addressed many review comments
- switch to NAPI
- add TX flow control
- mark functions with __devinit and __devexit
- add sysfs readout of MODULbus number (hex switch)
- implement GPIO driver for VMOD-TTL

RFCv2 -> RFCv3:
- addressed many review comments
- correct CAN bus error handling
- use struct device to track subdevices
- use structures for register layout
- add lots of #defines for register values
- use better function prefixes

RFCv1 -> RFCv2:
- converted to a multi-driver model
- addressed many review comments
- added CAN bus error handling
- use a work function only instead of work + NAPI
- use SJA1000 bittiming calculation code

I apologize if I've CC'd too many people here, but I'm unsure if people
would rather see the whole patch series, or just each part.

I appreciate any review you can offer.

Thanks,
Ira

             reply	other threads:[~2010-03-18 17:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-18 16:38 Ira W. Snyder [this message]
2010-03-29 16:58 Ira W. Snyder
2010-04-02 10:00 ` Samuel Ortiz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1268930324-29841-1-git-send-email-iws@ovro.caltech.edu \
    --to=iws@ovro.caltech.edu \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    --cc=socketcan-core@lists.berlios.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®