From: pavan_savoy@ti.com
To: gregkh@suse.de
Cc: alan@lxorguk.ukuu.org.uk, pavan_savoy@ti.com,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/6] drivers:misc: Kconfig, Makefile for TI's ST ldisc
Date: Mon, 22 Mar 2010 16:19:12 -0500 [thread overview]
Message-ID: <1269292756-7469-3-git-send-email-pavan_savoy@ti.com> (raw)
In-Reply-To: <1269292756-7469-2-git-send-email-pavan_savoy@ti.com>
From: Pavan Savoy <pavan_savoy@ti.com>
This change adds the Kconfig and Make file for TI's
ST line discipline driver and the BlueZ driver for BT
core of the TI BT/FM/GPS combo chip.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
---
drivers/misc/Kconfig | 1 +
drivers/misc/Makefile | 1 +
drivers/misc/ti-st/Kconfig | 24 ++++++++++++++++++++++++
drivers/misc/ti-st/Makefile | 7 +++++++
4 files changed, 33 insertions(+), 0 deletions(-)
create mode 100644 drivers/misc/ti-st/Kconfig
create mode 100644 drivers/misc/ti-st/Makefile
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 625e3a6..c059bca 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -344,5 +344,6 @@ source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
source "drivers/misc/iwmc3200top/Kconfig"
+source "drivers/misc/ti-st/Kconfig"
endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index c221917..021f282 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-$(CONFIG_HWLAT_DETECTOR) += hwlat_detector.o
obj-y += eeprom/
obj-y += cb710/
+obj-y += ti-st/
diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig
new file mode 100644
index 0000000..18eea1c
--- /dev/null
+++ b/drivers/misc/ti-st/Kconfig
@@ -0,0 +1,24 @@
+#
+# TI's shared transport line discipline and the protocol
+# drivers (BT, FM and GPS)
+#
+menu "Texas Instruments shared transport line discipline"
+ config TI_ST
+ tristate "shared transport core driver"
+ select FW_LOADER
+ help
+ This enables the shared transport core driver for TI
+ BT / FM and GPS combo chips.This enables protocol drivers
+ to register themselves with core and send data, the responses
+ are returned to relevant protocol drivers based on their
+ packet types.
+
+ config ST_BT
+ tristate "BlueZ bluetooth driver for ST"
+ select BT
+ select TI_ST
+ help
+ This enables the Bluetooth driver for TI BT/FM/GPS combo devices
+ This makes use of shared transport line discipline core driver to
+ communicate with the BT core of the combo chip.
+endmenu
diff --git a/drivers/misc/ti-st/Makefile b/drivers/misc/ti-st/Makefile
new file mode 100644
index 0000000..cff3770
--- /dev/null
+++ b/drivers/misc/ti-st/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for TI's shared transport line discipline
+# and it's protocol drivers (BT, FM, GPS)
+#
+obj-$(CONFIG_TI_ST) += st_drv.o
+st_drv-objs := st_core.o st_kim.o st_ll.o
+obj-$(CONFIG_ST_BT) += bt_drv.o
--
1.5.4.3
next prev parent reply other threads:[~2010-03-22 21:19 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-22 21:19 [re-worked] New ldisc for WiLink7.0 pavan_savoy
2010-03-22 21:19 ` [PATCH 1/6] serial: TTY: new ldisc for TI BT/FM/GPS chips pavan_savoy
2010-03-22 21:19 ` pavan_savoy [this message]
2010-03-22 21:19 ` [PATCH 3/6] drivers:misc: sources for ST core pavan_savoy
2010-03-22 21:19 ` [PATCH 4/6] drivers:misc: sources for Init manager module pavan_savoy
2010-03-22 21:19 ` [PATCH 5/6] drivers:misc: sources for HCI LL PM protocol pavan_savoy
2010-03-22 21:19 ` [PATCH 6/6] drivers:misc: sources for ST header file pavan_savoy
2010-03-22 21:36 ` [PATCH 4/6] drivers:misc: sources for Init manager module Greg KH
2010-03-22 22:03 ` Savoy, Pavan
2010-03-24 2:23 ` Greg KH
2010-03-24 8:04 ` Marcel Holtmann
2010-03-24 14:54 ` Pavan Savoy
2010-03-24 15:52 ` Greg KH
2010-03-24 16:11 ` Marcel Holtmann
2010-03-24 16:22 ` Pavan Savoy
2010-03-24 16:38 ` Marcel Holtmann
2010-03-24 16:39 ` Randy Dunlap
2010-03-24 16:54 ` Pavan Savoy
2010-03-24 17:03 ` Alan Cox
2010-03-24 17:09 ` Pavan Savoy
2010-03-24 17:26 ` Alan Cox
2010-03-24 17:32 ` Pavan Savoy
2010-03-24 17:39 ` Alan Cox
2010-03-24 18:46 ` Pavan Savoy
2010-03-24 20:54 ` Marcel Holtmann
2010-03-24 21:03 ` Pavan Savoy
2010-03-24 17:15 ` Marcel Holtmann
2010-03-24 17:42 ` Pavan Savoy
2010-03-24 20:59 ` Marcel Holtmann
2010-03-24 16:58 ` Alan Cox
2010-03-24 16:56 ` Pavan Savoy
2010-03-24 16:26 ` Greg KH
2010-03-24 16:35 ` Pavan Savoy
2010-03-24 16:52 ` Greg KH
2010-03-24 17:05 ` Pavan Savoy
2010-03-24 17:20 ` Alan Cox
2010-03-22 21:34 ` [PATCH 3/6] drivers:misc: sources for ST core Greg KH
2010-03-23 15:24 ` Alan Cox
2010-03-22 21:34 ` [PATCH 2/6] drivers:misc: Kconfig, Makefile for TI's ST ldisc Greg KH
2010-03-22 21:35 ` Greg KH
2010-03-23 0:07 ` Tilman Schmidt
2010-03-23 15:18 ` Alan Cox
2010-03-24 2:19 ` Greg KH
2010-03-22 21:45 ` Randy Dunlap
2010-03-22 22:37 ` Savoy, Pavan
2010-03-22 22:49 ` Randy Dunlap
2010-03-23 15:20 ` [PATCH 1/6] serial: TTY: new ldisc for TI BT/FM/GPS chips Alan Cox
2010-03-22 23:45 [PATCH 2/6] drivers:misc: Kconfig, Makefile for TI's ST ldisc Pavan Savoy
2010-03-23 0:09 ` Randy Dunlap
2010-03-23 15:10 Pavan Savoy
2010-03-23 15:23 ` Randy Dunlap
2010-03-23 15:55 Pavan Savoy
2010-03-23 16:04 ` Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1269292756-7469-3-git-send-email-pavan_savoy@ti.com \
--to=pavan_savoy@ti.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®