* [PATCH] USB: pxa27x_udc: use four bits to store endpoint addresses
@ 2010-04-01 20:42 Matt Reimer
0 siblings, 0 replies; only message in thread
From: Matt Reimer @ 2010-04-01 20:42 UTC (permalink / raw)
To: linux-kernel; +Cc: Matt Reimer
Endpoint addresses on pxa27x can be programmed as 1-15, but since
only three bits were being used to store the endpoint number it
was possible to overflow.
Signed-off-by: Matt Reimer <mreimer@sdgsystems.com>
---
drivers/usb/gadget/pxa27x_udc.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index ff61e48..cd16231 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -360,7 +360,7 @@ struct pxa_ep {
* Specific pxa endpoint data, needed for hardware initialization
*/
unsigned dir_in:1;
- unsigned addr:3;
+ unsigned addr:4;
unsigned config:2;
unsigned interface:3;
unsigned alternate:3;
--
1.6.3.3
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-04-01 20:42 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-01 20:42 [PATCH] USB: pxa27x_udc: use four bits to store endpoint addresses Matt Reimer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®