From: Matthew Garrett <mjg@redhat.com>
To: minyard@acm.org
Cc: openipmi-developer@lists.sourceforge.net, bjorn.helgaas@hp.com,
linux-kernel@vger.kernel.org, Matthew Garrett <mjg@redhat.com>
Subject: [PATCH 1/3] ipmi: Split device discovery and registration
Date: Tue, 20 Apr 2010 14:40:26 -0400 [thread overview]
Message-ID: <1271788828-10231-1-git-send-email-mjg@redhat.com> (raw)
The ipmi spec indicates that we should only make use of one si per bmc,
so separate device discovery and registration to make that possible.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
---
drivers/char/ipmi/ipmi_si_intf.c | 115 +++++++++++++++++++++++++-------------
1 files changed, 75 insertions(+), 40 deletions(-)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 4462b11..d2bdf92 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -300,6 +300,7 @@ static int num_max_busy_us;
static int unload_when_empty = 1;
+static int add_smi(struct smi_info *smi);
static int try_smi_init(struct smi_info *smi);
static void cleanup_one_si(struct smi_info *to_clean);
@@ -1777,7 +1778,9 @@ static int hotmod_handler(const char *val, struct kernel_param *kp)
info->irq_setup = std_irq_setup;
info->slave_addr = ipmb;
- try_smi_init(info);
+ if (!add_smi(info))
+ if (try_smi_init(info))
+ cleanup_one_si(info);
} else {
/* remove */
struct smi_info *e, *tmp_e;
@@ -1863,7 +1866,9 @@ static __devinit void hardcode_find_bmc(void)
info->irq_setup = std_irq_setup;
info->slave_addr = slave_addrs[i];
- try_smi_init(info);
+ if (!add_smi(info))
+ if (try_smi_init(info))
+ cleanup_one_si(info);
}
}
@@ -2061,7 +2066,7 @@ static __devinit int try_init_spmi(struct SPMITable *spmi)
}
info->io.addr_data = spmi->addr.address;
- try_smi_init(info);
+ add_smi(info);
return 0;
}
@@ -2159,7 +2164,7 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
info->dev = &acpi_dev->dev;
pnp_set_drvdata(dev, info);
- return try_smi_init(info);
+ return add_smi(info);
err_free:
kfree(info);
@@ -2318,7 +2323,7 @@ static __devinit void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
if (info->irq)
info->irq_setup = std_irq_setup;
- try_smi_init(info);
+ add_smi(info);
}
static void __devinit dmi_find_bmc(void)
@@ -2421,7 +2426,7 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
info->dev = &pdev->dev;
pci_set_drvdata(pdev, info);
- return try_smi_init(info);
+ return add_smi(info);
}
static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
@@ -2534,7 +2539,7 @@ static int __devinit ipmi_of_probe(struct of_device *dev,
dev_set_drvdata(&dev->dev, info);
- return try_smi_init(info);
+ return add_smi(info);
}
static int __devexit ipmi_of_remove(struct of_device *dev)
@@ -2960,14 +2965,17 @@ static __devinit void default_find_bmc(void)
info->io.regsize = DEFAULT_REGSPACING;
info->io.regshift = 0;
- if (try_smi_init(info) == 0) {
- /* Found one... */
- printk(KERN_INFO "ipmi_si: Found default %s state"
- " machine at %s address 0x%lx\n",
- si_to_str[info->si_type],
- addr_space_to_str[info->io.addr_type],
- info->io.addr_data);
- return;
+ if (add_smi(info) == 0) {
+ if ((try_smi_init(info)) == 0) {
+ /* Found one... */
+ printk(KERN_INFO "ipmi_si: Found default %s"
+ " state machine at %s address 0x%lx\n",
+ si_to_str[info->si_type],
+ addr_space_to_str[info->io.addr_type],
+ info->io.addr_data);
+ } else {
+ cleanup_one_si(info);
+ }
}
}
}
@@ -2986,9 +2994,36 @@ static int is_new_interface(struct smi_info *info)
return 1;
}
+static int add_smi(struct smi_info *new_smi)
+{
+ int rv = 0;
+
+ printk(KERN_INFO "ipmi_si: Adding %s-specified %s state machine",
+ new_smi->addr_source, si_to_str[new_smi->si_type]);
+ mutex_lock(&smi_infos_lock);
+ if (!is_new_interface(new_smi)) {
+ printk(KERN_CONT ": duplicate interface\n");
+ rv = -EBUSY;
+ goto out_err;
+ }
+
+ printk(KERN_CONT "\n");
+
+ /* So we know not to free it unless we have allocated one. */
+ new_smi->intf = NULL;
+ new_smi->si_sm = NULL;
+ new_smi->handlers = NULL;
+
+ list_add_tail(&new_smi->link, &smi_infos);
+
+out_err:
+ mutex_unlock(&smi_infos_lock);
+ return rv;
+}
+
static int try_smi_init(struct smi_info *new_smi)
{
- int rv;
+ int rv = 0;
int i;
if (new_smi->addr_source) {
@@ -3002,18 +3037,6 @@ static int try_smi_init(struct smi_info *new_smi)
new_smi->slave_addr, new_smi->irq);
}
- mutex_lock(&smi_infos_lock);
- if (!is_new_interface(new_smi)) {
- printk(KERN_WARNING "ipmi_si: duplicate interface\n");
- rv = -EBUSY;
- goto out_err;
- }
-
- /* So we know not to free it unless we have allocated one. */
- new_smi->intf = NULL;
- new_smi->si_sm = NULL;
- new_smi->handlers = NULL;
-
switch (new_smi->si_type) {
case SI_KCS:
new_smi->handlers = &kcs_smi_handlers;
@@ -3174,8 +3197,6 @@ static int try_smi_init(struct smi_info *new_smi)
goto out_err_stop_timer;
}
- list_add_tail(&new_smi->link, &smi_infos);
-
mutex_unlock(&smi_infos_lock);
printk(KERN_INFO "IPMI %s interface initialized\n",
@@ -3188,11 +3209,17 @@ static int try_smi_init(struct smi_info *new_smi)
wait_for_timer_and_thread(new_smi);
out_err:
- if (new_smi->intf)
+ new_smi->interrupt_disabled = 1;
+
+ if (new_smi->intf) {
ipmi_unregister_smi(new_smi->intf);
+ new_smi->intf = NULL;
+ }
- if (new_smi->irq_cleanup)
+ if (new_smi->irq_cleanup) {
new_smi->irq_cleanup(new_smi);
+ new_smi->irq_cleanup = NULL;
+ }
/*
* Wait until we know that we are out of any interrupt
@@ -3205,16 +3232,21 @@ static int try_smi_init(struct smi_info *new_smi)
if (new_smi->handlers)
new_smi->handlers->cleanup(new_smi->si_sm);
kfree(new_smi->si_sm);
+ new_smi->si_sm = NULL;
}
- if (new_smi->addr_source_cleanup)
+ if (new_smi->addr_source_cleanup) {
new_smi->addr_source_cleanup(new_smi);
- if (new_smi->io_cleanup)
+ new_smi->addr_source_cleanup = NULL;
+ }
+ if (new_smi->io_cleanup) {
new_smi->io_cleanup(new_smi);
+ new_smi->io_cleanup = NULL;
+ }
- if (new_smi->dev_registered)
+ if (new_smi->dev_registered) {
platform_device_unregister(new_smi->pdev);
-
- kfree(new_smi);
+ new_smi->dev_registered = 0;
+ }
mutex_unlock(&smi_infos_lock);
@@ -3317,7 +3349,7 @@ module_init(init_ipmi_si);
static void cleanup_one_si(struct smi_info *to_clean)
{
- int rv;
+ int rv = 0;
unsigned long flags;
if (!to_clean)
@@ -3361,14 +3393,17 @@ static void cleanup_one_si(struct smi_info *to_clean)
schedule_timeout_uninterruptible(1);
}
- rv = ipmi_unregister_smi(to_clean->intf);
+ if (to_clean->intf)
+ rv = ipmi_unregister_smi(to_clean->intf);
+
if (rv) {
printk(KERN_ERR
"ipmi_si: Unable to unregister device: errno=%d\n",
rv);
}
- to_clean->handlers->cleanup(to_clean->si_sm);
+ if (to_clean->handlers)
+ to_clean->handlers->cleanup(to_clean->si_sm);
kfree(to_clean->si_sm);
--
1.6.5.2
next reply other threads:[~2010-04-20 18:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-20 18:40 Matthew Garrett [this message]
2010-04-20 18:40 ` [PATCH 2/3] ipmi: Only register one si per bmc Matthew Garrett
2010-04-20 18:40 ` [PATCH 3/3] ipmi: Change device discovery order Matthew Garrett
2010-04-21 18:09 ` [PATCH 2/3] ipmi: Only register one si per bmc Corey Minyard
2010-04-21 18:21 ` Matthew Garrett
2010-04-21 20:03 ` Corey Minyard
2010-04-21 20:10 ` Matthew Garrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1271788828-10231-1-git-send-email-mjg@redhat.com \
--to=mjg@redhat.com \
--cc=bjorn.helgaas@hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=minyard@acm.org \
--cc=openipmi-developer@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®