* [PATCH 01/12] Fixed checkpatch.pl issues to Line 172 Fixed most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 172
2010-06-05 11:35 Mike Gilks
@ 2010-06-05 11:35 ` Mike Gilks
0 siblings, 0 replies; 2+ messages in thread
From: Mike Gilks @ 2010-06-05 11:35 UTC (permalink / raw)
To: gregkh, mchehab, julia, joe; +Cc: devel, linux-kernel, Mike Gilks, Mike Gilks
From: Mike Gilks <kernel.online@gilksonline.com>
Signed-off-by: Mike Gilks <mike.kernel@gilksonline.com>
---
drivers/staging/rtl8192u/r8192U_core.c | 95 ++++++++++++++++---------------
1 files changed, 49 insertions(+), 46 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 2bede27..dd42a35 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -25,12 +25,12 @@
*/
#ifndef CONFIG_FORCE_HARD_FLOAT
-double __floatsidf (int i) { return i; }
-unsigned int __fixunsdfsi (double d) { return d; }
-double __adddf3(double a, double b) { return a+b; }
-double __addsf3(float a, float b) { return a+b; }
-double __subdf3(double a, double b) { return a-b; }
-double __extendsfdf2(float a) {return a;}
+double __floatsidf(int i) {return i; }
+unsigned int __fixunsdfsi(double d) {return d; }
+double __adddf3(double a, double b) {return a+b; }
+double __addsf3(float a, float b) {return a+b; }
+double __subdf3(double a, double b) {return a-b; }
+double __extendsfdf2(float a) {return a; }
#endif
#undef LOOP_TEST
@@ -58,20 +58,20 @@ double __extendsfdf2(float a) {return a;}
#define CONFIG_RTL8192_IO_MAP
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include "r8192U_hw.h"
#include "r8192U.h"
-#include "r8190_rtl8256.h" /* RTL8225 Radio frontend */
-#include "r8180_93cx6.h" /* Card EEPROM */
+#include "r8190_rtl8256.h" /* RTL8225 Radio frontend */
+#include "r8180_93cx6.h" /* Card EEPROM */
#include "r8192U_wx.h"
-#include "r819xU_phy.h" //added by WB 4.30.2008
+#include "r819xU_phy.h" /* added by WB 4.30.2008 */
#include "r819xU_phyreg.h"
#include "r819xU_cmdpkt.h"
#include "r8192U_dm.h"
-//#include "r8192xU_phyreg.h"
+/*#include "r8192xU_phyreg.h" */
#include <linux/usb.h>
#include <linux/slab.h>
-// FIXME: check if 2.6.7 is ok
+/* FIXME: check if 2.6.7 is ok */
#ifdef CONFIG_RTL8192_PM
#include "r8192_pm.h"
@@ -80,27 +80,30 @@ double __extendsfdf2(float a) {return a;}
#ifdef ENABLE_DOT11D
#include "dot11d.h"
#endif
-//set here to open your trace code. //WB
-u32 rt_global_debug_component = \
- // COMP_INIT |
-// COMP_DBG |
- // COMP_EPROM |
-// COMP_PHY |
- // COMP_RF |
-// COMP_FIRMWARE |
-// COMP_CH |
- // COMP_POWER_TRACKING |
-// COMP_RATE |
- // COMP_TXAGC |
- // COMP_TRACE |
- COMP_DOWN |
- // COMP_RECV |
- // COMP_SWBW |
- COMP_SEC |
- // COMP_RESET |
- // COMP_SEND |
- // COMP_EVENTS |
- COMP_ERR ; //always open err flags on
+/* set here to open your trace code. //WB */
+u32 rt_global_debug_component =
+ /*COMP_INIT |
+ *COMP_DBG |
+ *COMP_EPROM |
+ *COMP_PHY |
+ *COMP_RF |
+ *COMP_FIRMWARE |
+ *COMP_CH |
+ *COMP_POWER_TRACKING |
+ *COMP_RATE |
+ *COMP_TXAGC |
+ *COMP_TRACE |
+ */
+ COMP_DOWN |
+ /*COMP_RECV |
+ *COMP_SWBW |
+ */
+ COMP_SEC |
+ /*COMP_RESET |
+ *COMP_SEND |
+ *COMP_EVENTS |
+ */
+ COMP_ERR ; /* always open err flags on */
#define TOTAL_CAM_ENTRY 32
#define CAM_CONTENT_COUNT 8
@@ -129,21 +132,21 @@ MODULE_VERSION("V 1.1");
MODULE_DEVICE_TABLE(usb, rtl8192_usb_id_tbl);
MODULE_DESCRIPTION("Linux driver for Realtek RTL8192 USB WiFi cards");
-static char* ifname = "wlan%d";
-static int hwwep = 1; //default use hw. set 0 to use software security
+static char *ifname = "wlan%d";
+static int hwwep = 1; /* default use hw. set 0 to use software security */
static int channels = 0x3fff;
+module_param(ifname, charp, S_IRUGO|S_IWUSR);
+/*module_param(hwseqnum,int, S_IRUGO|S_IWUSR); */
+module_param(hwwep, int, S_IRUGO|S_IWUSR);
+module_param(channels, int, S_IRUGO|S_IWUSR);
-
-module_param(ifname, charp, S_IRUGO|S_IWUSR );
-//module_param(hwseqnum,int, S_IRUGO|S_IWUSR);
-module_param(hwwep,int, S_IRUGO|S_IWUSR);
-module_param(channels,int, S_IRUGO|S_IWUSR);
-
-MODULE_PARM_DESC(ifname," Net interface name, wlan%d=default");
-//MODULE_PARM_DESC(hwseqnum," Try to use hardware 802.11 header sequence numbers. Zero=default");
-MODULE_PARM_DESC(hwwep," Try to use hardware security support. ");
-MODULE_PARM_DESC(channels," Channel bitmask for specific locales. NYI");
+MODULE_PARM_DESC(ifname, " Net interface name, wlan%d=default");
+/*MODULE_PARM_DESC(hwseqnum, " Try to use hardware 802.11 header sequence
+ * numbers. Zero=default");
+ */
+MODULE_PARM_DESC(hwwep, " Try to use hardware security support. ");
+MODULE_PARM_DESC(channels, " Channel bitmask for specific locales. NYI");
static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id);
@@ -160,7 +163,7 @@ static struct usb_driver rtl8192_usb_driver = {
.resume = rtl8192_resume, /* PM resume fn */
#else
.suspend = NULL, /* PM suspend fn */
- .resume = NULL, /* PM resume fn */
+ .resume = NULL, /* PM resume fn */
#endif
};
--
1.6.3.3
^ permalink raw reply [flat|nested] 2+ messages in thread