* [PATCH 1/3] staging: rtl8192u: fix checkpatch.pl issues to line 2600 staging: rtl8192u: Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 2500 [not found] <staging:rtl8192U.core-to line3000> @ 2010-06-07 8:51 ` Mike Gilks 2010-06-07 8:51 ` [PATCH 2/3] staging: rtl8192u: fix checkpatch.pl issues to line 2800 Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 2800 Mike Gilks 0 siblings, 1 reply; 3+ messages in thread From: Mike Gilks @ 2010-06-07 8:51 UTC (permalink / raw) To: gregkh, mchehab, julia, joe; +Cc: devel, linux-kernel, Mike Gilks Signed-off-by: Mike Gilks <mike.kernel@gilksonline.com> --- drivers/staging/rtl8192u/r8192U_core.c | 57 +++++++++++++++++++------------- 1 files changed, 34 insertions(+), 23 deletions(-) diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index 66adac3..ea9584b 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -2514,27 +2514,31 @@ static struct ieee80211_qos_parameters def_qos_parameters = { }; -void rtl8192_update_beacon(struct work_struct * work) +void rtl8192_update_beacon(struct work_struct *work) { - struct r8192_priv *priv = container_of(work, struct r8192_priv, update_beacon_wq.work); - struct net_device *dev = priv->ieee80211->dev; - struct ieee80211_device* ieee = priv->ieee80211; - struct ieee80211_network* net = &ieee->current_network; + struct r8192_priv *priv = container_of(work, struct r8192_priv, + update_beacon_wq.work); + struct net_device *dev = priv->ieee80211->dev; + struct ieee80211_device *ieee = priv->ieee80211; + struct ieee80211_network *net = &ieee->current_network; if (ieee->pHTInfo->bCurrentHTSupport) HTUpdateSelfAndPeerSetting(ieee, net); - ieee->pHTInfo->bCurrentRT2RTLongSlotTime = net->bssht.bdRT2RTLongSlotTime; + ieee->pHTInfo->bCurrentRT2RTLongSlotTime = + net->bssht.bdRT2RTLongSlotTime; rtl8192_update_cap(dev, net->capability); } /* * background support to run QoS activate functionality */ -int WDCAPARA_ADD[] = {EDCAPARA_BE,EDCAPARA_BK,EDCAPARA_VI,EDCAPARA_VO}; -void rtl8192_qos_activate(struct work_struct * work) +int WDCAPARA_ADD[] = {EDCAPARA_BE, EDCAPARA_BK, EDCAPARA_VI, EDCAPARA_VO}; +void rtl8192_qos_activate(struct work_struct *work) { - struct r8192_priv *priv = container_of(work, struct r8192_priv, qos_activate); + struct r8192_priv *priv = container_of(work, + struct r8192_priv, qos_activate); struct net_device *dev = priv->ieee80211->dev; - struct ieee80211_qos_parameters *qos_parameters = &priv->ieee80211->current_network.qos_data.parameters; + struct ieee80211_qos_parameters *qos_parameters = + &priv->ieee80211->current_network.qos_data.parameters; u8 mode = priv->ieee80211->current_network.mode; /* u32 size = sizeof(struct ieee80211_qos_parameters); */ u8 u1bAIFS; @@ -2545,19 +2549,25 @@ void rtl8192_qos_activate(struct work_struct * work) return; mutex_lock(&priv->mutex); - if(priv->ieee80211->state != IEEE80211_LINKED) + if (priv->ieee80211->state != IEEE80211_LINKED) goto success; - RT_TRACE(COMP_QOS,"qos active process with associate response received\n"); + RT_TRACE(COMP_QOS, "qos active process with associate response" + " received\n"); /* It better set slot time at first */ - /* For we just support b/g mode at present, let the slot time at 9/20 selection */ + /* For we just support b/g mode at present, let the slot time at 9/20 + * selection */ /* update the ac parameter to related registers */ - for(i = 0; i < QOS_QUEUE_NUM; i++) { + for (i = 0; i < QOS_QUEUE_NUM; i++) { /* Mode G/A: slotTimeTimer = 9; Mode B: 20 */ - u1bAIFS = qos_parameters->aifs[i] * ((mode&(IEEE_G|IEEE_N_24G)) ?9:20) + aSifsTime; - u4bAcParam = ((((u32)(qos_parameters->tx_op_limit[i]))<< AC_PARAM_TXOP_LIMIT_OFFSET)| - (((u32)(qos_parameters->cw_max[i]))<< AC_PARAM_ECW_MAX_OFFSET)| - (((u32)(qos_parameters->cw_min[i]))<< AC_PARAM_ECW_MIN_OFFSET)| - ((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET)); + u1bAIFS = qos_parameters->aifs[i] * ((mode&(IEEE_G|IEEE_N_24G)) + ? 9 : 20) + aSifsTime; + u4bAcParam = ((((u32)(qos_parameters->tx_op_limit[i])) << + AC_PARAM_TXOP_LIMIT_OFFSET) | (((u32) + (qos_parameters->cw_max[i])) << + AC_PARAM_ECW_MAX_OFFSET) | (((u32) + (qos_parameters->cw_min[i])) << + AC_PARAM_ECW_MIN_OFFSET) | ((u32)u1bAIFS << + AC_PARAM_AIFS_OFFSET)); write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam); /* write_nic_dword(dev, WDCAPARA_ADD[i], 0x005e4332); */ @@ -2574,7 +2584,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv, int ret = 0; u32 size = sizeof(struct ieee80211_qos_parameters); - if(priv->ieee80211->state !=IEEE80211_LINKED) + if (priv->ieee80211->state != IEEE80211_LINKED) return ret; if ((priv->ieee80211->iw_mode != IW_MODE_INFRA)) @@ -2592,16 +2602,17 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv, network->qos_data.old_param_count = network->qos_data.param_count; queue_work(priv->priv_wq, &priv->qos_activate); - RT_TRACE (COMP_QOS, "QoS parameters change call " + RT_TRACE(COMP_QOS, "QoS parameters change call " "qos_activate\n"); } } else { - memcpy(&priv->ieee80211->current_network.qos_data.parameters,\ + memcpy(&priv->ieee80211->current_network.qos_data.parameters, &def_qos_parameters, size); if ((network->qos_data.active == 1) && (active_network == 1)) { queue_work(priv->priv_wq, &priv->qos_activate); - RT_TRACE(COMP_QOS, "QoS was disabled call qos_activate \n"); + RT_TRACE(COMP_QOS, "QoS was disabled call qos_activate" + "\n"); } network->qos_data.active = 0; network->qos_data.supported = 0; -- 1.6.3.3 ^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 2/3] staging: rtl8192u: fix checkpatch.pl issues to line 2800 Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 2800 2010-06-07 8:51 ` [PATCH 1/3] staging: rtl8192u: fix checkpatch.pl issues to line 2600 staging: rtl8192u: Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 2500 Mike Gilks @ 2010-06-07 8:51 ` Mike Gilks 2010-06-07 8:51 ` [PATCH 3/3] staging: rtl8192u: fix checkpatch.pl issues to line 3000 Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 3000 Mike Gilks 0 siblings, 1 reply; 3+ messages in thread From: Mike Gilks @ 2010-06-07 8:51 UTC (permalink / raw) To: gregkh, mchehab, julia, joe; +Cc: devel, linux-kernel, Mike Gilks Signed-off-by: Mike Gilks <mike.kernel@gilksonline.com> --- drivers/staging/rtl8192u/r8192U_core.c | 69 +++++++++++++++++--------------- 1 files changed, 37 insertions(+), 32 deletions(-) diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index ea9584b..b8ba05f 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -2622,13 +2622,13 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv, } /* handle manage frame frame beacon and probe response */ -static int rtl8192_handle_beacon(struct net_device * dev, - struct ieee80211_beacon * beacon, - struct ieee80211_network * network) +static int rtl8192_handle_beacon(struct net_device *dev, + struct ieee80211_beacon *beacon, + struct ieee80211_network *network) { struct r8192_priv *priv = ieee80211_priv(dev); - rtl8192_qos_handle_probe_response(priv,1,network); + rtl8192_qos_handle_probe_response(priv, 1, network); queue_delayed_work(priv->priv_wq, &priv->update_beacon_wq, 0); return 0; @@ -2650,29 +2650,30 @@ static int rtl8192_qos_association_resp(struct r8192_priv *priv, if ((priv == NULL) || (network == NULL)) return ret; - if(priv->ieee80211->state !=IEEE80211_LINKED) + if (priv->ieee80211->state != IEEE80211_LINKED) return ret; if ((priv->ieee80211->iw_mode != IW_MODE_INFRA)) return ret; spin_lock_irqsave(&priv->ieee80211->lock, flags); - if(network->flags & NETWORK_HAS_QOS_PARAMETERS) { - memcpy(&priv->ieee80211->current_network.qos_data.parameters,\ - &network->qos_data.parameters,\ + if (network->flags & NETWORK_HAS_QOS_PARAMETERS) { + memcpy(&priv->ieee80211->current_network.qos_data.parameters, + &network->qos_data.parameters, sizeof(struct ieee80211_qos_parameters)); priv->ieee80211->current_network.qos_data.active = 1; { set_qos_param = 1; /* update qos parameter for current network */ - priv->ieee80211->current_network.qos_data.old_param_count = \ - priv->ieee80211->current_network.qos_data.param_count; - priv->ieee80211->current_network.qos_data.param_count = \ - network->qos_data.param_count; + priv->ieee80211->current_network.qos_data. + old_param_count = priv->ieee80211-> + current_network.qos_data.param_count; + priv->ieee80211->current_network.qos_data.param_count = + network->qos_data.param_count; } } else { - memcpy(&priv->ieee80211->current_network.qos_data.parameters,\ - &def_qos_parameters, size); + memcpy(&priv->ieee80211->current_network.qos_data.parameters, + &def_qos_parameters, size); priv->ieee80211->current_network.qos_data.active = 0; priv->ieee80211->current_network.qos_data.supported = 0; set_qos_param = 1; @@ -2680,7 +2681,9 @@ static int rtl8192_qos_association_resp(struct r8192_priv *priv, spin_unlock_irqrestore(&priv->ieee80211->lock, flags); - RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n",__func__,network->flags ,priv->ieee80211->current_network.qos_data.active); + RT_TRACE(COMP_QOS, "%s: network->flags = %d,%d\n", __func__, + network->flags, priv->ieee80211-> + current_network.qos_data.active); if (set_qos_param == 1) queue_work(priv->priv_wq, &priv->qos_activate); @@ -2690,8 +2693,8 @@ static int rtl8192_qos_association_resp(struct r8192_priv *priv, static int rtl8192_handle_assoc_response(struct net_device *dev, - struct ieee80211_assoc_response_frame *resp, - struct ieee80211_network *network) + struct ieee80211_assoc_response_frame *resp, + struct ieee80211_network *network) { struct r8192_priv *priv = ieee80211_priv(dev); rtl8192_qos_association_resp(priv, network); @@ -2699,19 +2702,19 @@ static int rtl8192_handle_assoc_response(struct net_device *dev, } -void rtl8192_update_ratr_table(struct net_device* dev) +void rtl8192_update_ratr_table(struct net_device *dev) /* POCTET_STRING posLegacyRate, */ /* u8* pMcsRate) */ /* PRT_WLAN_STA pEntry) */ { - struct r8192_priv* priv = ieee80211_priv(dev); - struct ieee80211_device* ieee = priv->ieee80211; - u8* pMcsRate = ieee->dot11HTOperationalRateSet; + struct r8192_priv *priv = ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee80211; + u8 *pMcsRate = ieee->dot11HTOperationalRateSet; /* struct ieee80211_network *net = &ieee->current_network; */ u32 ratr_value = 0; u8 rate_index = 0; - rtl8192_config_rate(dev, (u16*)(&ratr_value)); - ratr_value |= (*(u16*)(pMcsRate)) << 12; + rtl8192_config_rate(dev, (u16 *)(&ratr_value)); + ratr_value |= (*(u16 *)(pMcsRate)) << 12; /* switch (net->mode) */ switch (ieee->mode) { case IEEE_A: @@ -2741,7 +2744,7 @@ void rtl8192_update_ratr_table(struct net_device* dev) ratr_value &= 0x0FFFFFFF; if (ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz) { ratr_value |= 0x80000000; - }else if (!ieee->pHTInfo->bCurTxBW40MHz && + } else if (!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz){ ratr_value |= 0x80000000; } @@ -2769,18 +2772,20 @@ bool GetNmodeSupportBySecCfg8192(struct net_device *dev) (0 == strcmp(crypt->ops->name, "WEP"))); /* simply judge */ - if(encrypt && (wpa_ie_len == 0)) { + if (encrypt && (wpa_ie_len == 0)) { /* wep encryption, no N mode setting */ return false; /* } else if((wpa_ie_len != 0)&&(memcmp(&(ieee->wpa_ie[14]), * ccmp_ie,4))) { */ - } else if((wpa_ie_len != 0)) { + } else if ((wpa_ie_len != 0)) { /* parse pairwise key type */ /* if((pairwisekey = WEP40) || (pairwisekey = WEP104) || * (pairwisekey = TKIP)) */ - if (((ieee->wpa_ie[0] == 0xdd) && (!memcmp(&(ieee->wpa_ie[14]),ccmp_ie,4))) || ((ieee->wpa_ie[0] == 0x30) && (!memcmp(&ieee->wpa_ie[10],ccmp_rsn_ie, 4)))) + if (((ieee->wpa_ie[0] == 0xdd) && (!memcmp(&(ieee->wpa_ie[14]), + ccmp_ie, 4))) || ((ieee->wpa_ie[0] == 0x30) && + (!memcmp(&ieee->wpa_ie[10], ccmp_rsn_ie, 4)))) return true; else return false; @@ -2791,13 +2796,13 @@ bool GetNmodeSupportBySecCfg8192(struct net_device *dev) return true; } -bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev) +bool GetHalfNmodeSupportByAPs819xUsb(struct net_device *dev) { - bool Reval; - struct r8192_priv* priv = ieee80211_priv(dev); - struct ieee80211_device* ieee = priv->ieee80211; + bool Reval; + struct r8192_priv *priv = ieee80211_priv(dev); + struct ieee80211_device *ieee = priv->ieee80211; - if(ieee->bHalfWirelessN24GMode == true) + if (ieee->bHalfWirelessN24GMode == true) Reval = true; else Reval = false; -- 1.6.3.3 ^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 3/3] staging: rtl8192u: fix checkpatch.pl issues to line 3000 Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 3000 2010-06-07 8:51 ` [PATCH 2/3] staging: rtl8192u: fix checkpatch.pl issues to line 2800 Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 2800 Mike Gilks @ 2010-06-07 8:51 ` Mike Gilks 0 siblings, 0 replies; 3+ messages in thread From: Mike Gilks @ 2010-06-07 8:51 UTC (permalink / raw) To: gregkh, mchehab, julia, joe; +Cc: devel, linux-kernel, Mike Gilks Signed-off-by: Mike Gilks <mike.kernel@gilksonline.com> --- drivers/staging/rtl8192u/r8192U_core.c | 54 +++++++++++++++++-------------- 1 files changed, 30 insertions(+), 24 deletions(-) diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index b8ba05f..0f852ad 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -2810,26 +2810,26 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device *dev) return Reval; } -void rtl8192_refresh_supportrate(struct r8192_priv* priv) +void rtl8192_refresh_supportrate(struct r8192_priv *priv) { - struct ieee80211_device* ieee = priv->ieee80211; + struct ieee80211_device *ieee = priv->ieee80211; /* we donot consider set support rate for ABG mode, * only HT MCS rate is set here. */ - if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G) - { - memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16); + if (ieee->mode == WIRELESS_MODE_N_24G || + ieee->mode == WIRELESS_MODE_N_5G) { + memcpy(ieee->Regdot11HTOperationalRateSet, + ieee->RegHTSuppRateSet, 16); /* RT_DEBUG_DATA(COMP_INIT, ieee->RegHTSuppRateSet, 16); */ /* RT_DEBUG_DATA(COMP_INIT, * ieee->Regdot11HTOperationalRateSet, 16); */ - } - else + } else memset(ieee->Regdot11HTOperationalRateSet, 0, 16); return; } -u8 rtl8192_getSupportedWireleeMode(struct net_device*dev) +u8 rtl8192_getSupportedWireleeMode(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); u8 ret = 0; @@ -2876,11 +2876,13 @@ void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode) /* TODO: this function doesn't work well at this time, * we should wait for FPGA */ - ActUpdateChannelAccessSetting( pAdapter, pHalData->CurrentWirelessMode, &pAdapter->MgntInfo.Info8185.ChannelAccessSetting ); + ActUpdateChannelAccessSetting(pAdapter, pHalData->CurrentWirelessMode, + &pAdapter->MgntInfo.Info8185.ChannelAccessSetting); #endif priv->ieee80211->mode = wireless_mode; - if ((wireless_mode == WIRELESS_MODE_N_24G) || (wireless_mode == WIRELESS_MODE_N_5G)) + if ((wireless_mode == WIRELESS_MODE_N_24G) || + (wireless_mode == WIRELESS_MODE_N_5G)) priv->ieee80211->pHTInfo->bEnableHT = 1; else priv->ieee80211->pHTInfo->bEnableHT = 0; @@ -2889,7 +2891,7 @@ void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode) } /* init priv variables here. only non_zero value should be initialized here. */ -static void rtl8192_init_priv_variable(struct net_device* dev) +static void rtl8192_init_priv_variable(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); u8 i; @@ -2897,13 +2899,13 @@ static void rtl8192_init_priv_variable(struct net_device* dev) priv->chan = 1; /* set to channel 1 */ priv->ieee80211->mode = WIRELESS_MODE_AUTO; /* SET AUTO */ priv->ieee80211->iw_mode = IW_MODE_INFRA; - priv->ieee80211->ieee_up=0; + priv->ieee80211->ieee_up = 0; priv->retry_rts = DEFAULT_RETRY_RTS; priv->retry_data = DEFAULT_RETRY_DATA; priv->ieee80211->rts = DEFAULT_RTS_THRESHOLD; priv->ieee80211->rate = 110; /* 11 mbps */ priv->ieee80211->short_slot = 1; - priv->promisc = (dev->flags & IFF_PROMISC) ? 1:0; + priv->promisc = (dev->flags & IFF_PROMISC) ? 1 : 0; priv->CckPwEnl = 6; /* for silent reset */ priv->IrpPendingCount = 1; @@ -2914,7 +2916,8 @@ static void rtl8192_init_priv_variable(struct net_device* dev) priv->ieee80211->FwRWRF = 0; /* we don't use FW read/write RF until stable firmware is available. */ - priv->ieee80211->current_network.beacon_interval = DEFAULT_BEACONINTERVAL; + priv->ieee80211->current_network.beacon_interval = + DEFAULT_BEACONINTERVAL; priv->ieee80211->iw_mode = IW_MODE_INFRA; priv->ieee80211->softmac_features = IEEE_SOFTMAC_SCAN | IEEE_SOFTMAC_ASSOCIATE | IEEE_SOFTMAC_PROBERQ | @@ -2922,7 +2925,8 @@ static void rtl8192_init_priv_variable(struct net_device* dev) IEEE_SOFTMAC_BEACONS; /* added by amy 080604 | IEEE_SOFTMAC_SINGLE_QUEUE; */ priv->ieee80211->active_scan = 1; - priv->ieee80211->modulation = IEEE80211_CCK_MODULATION | IEEE80211_OFDM_MODULATION; + priv->ieee80211->modulation = IEEE80211_CCK_MODULATION | + IEEE80211_OFDM_MODULATION; priv->ieee80211->host_encrypt = 1; priv->ieee80211->host_decrypt = 1; priv->ieee80211->start_send_beacons = NULL; @@ -2948,14 +2952,14 @@ static void rtl8192_init_priv_variable(struct net_device* dev) priv->ieee80211->handle_beacon = rtl8192_handle_beacon; /* added by david */ priv->ieee80211->GetNmodeSupportBySecCfg = GetNmodeSupportBySecCfg8192; - priv->ieee80211->GetHalfNmodeSupportByAPsHandler = GetHalfNmodeSupportByAPs819xUsb; + priv->ieee80211->GetHalfNmodeSupportByAPsHandler = + GetHalfNmodeSupportByAPs819xUsb; priv->ieee80211->SetWirelessMode = rtl8192_SetWirelessMode; /* added by amy */ priv->ieee80211->InitialGainHandler = InitialGain819xUsb; priv->card_type = USB; #ifdef TO_DO_LIST - if(Adapter->bInHctTest) - { + if (Adapter->bInHctTest) { pHalData->ShortRetryLimit = 7; pHalData->LongRetryLimit = 7; } @@ -2967,7 +2971,7 @@ static void rtl8192_init_priv_variable(struct net_device* dev) priv->EarlyRxThreshold = 7; priv->enable_gpio0 = 0; priv->TransmitConfig = - /* TCR_DurProcMode | */ + /* TCR_DurProcMode | */ /* for RTL8185B, duration setting by HW */ /* ? TCR_DISReqQsize | */ (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| @@ -2976,12 +2980,12 @@ static void rtl8192_init_priv_variable(struct net_device* dev) /* Short retry limit */ (priv->LongRetryLimit<<TCR_LRL_OFFSET) | /* Long retry limit */ - (false ? TCR_SAT: 0); + (false ? TCR_SAT : 0); /* FALSE: HW provies PLCP length and LENGEXT, TURE: * SW proiveds them */ #ifdef TO_DO_LIST - if(Adapter->bInHctTest) + if (Adapter->bInHctTest) pHalData->ReceiveConfig = pHalData->CSMethod | RCR_AMF | RCR_ADF | /* RCR_AAP | */ @@ -3002,17 +3006,19 @@ static void rtl8192_init_priv_variable(struct net_device* dev) /* Max DMA Burst Size per Rx * DMA Burst, 7: unlimited. */ - (pHalData->EarlyRxThreshold<<RCR_FIFO_OFFSET) | + (pHalData->EarlyRxThreshold << + RCR_FIFO_OFFSET) | /* Rx FIFO Threshold, 7: * No Rx threshold. */ - (pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt:0); + (pHalData->EarlyRxThreshold == + 7 ? RCR_OnlyErlPkt : 0); else #endif priv->ReceiveConfig = RCR_AMF | RCR_ADF | /* accept management/data */ - RCR_ACF | + RCR_ACF | /* accept control frame for SW AP needs PS-poll, * 2005.07.07, by rcnjko. */ -- 1.6.3.3 ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-06-07 8:51 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <staging:rtl8192U.core-to line3000>
2010-06-07 8:51 ` [PATCH 1/3] staging: rtl8192u: fix checkpatch.pl issues to line 2600 staging: rtl8192u: Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 2500 Mike Gilks
2010-06-07 8:51 ` [PATCH 2/3] staging: rtl8192u: fix checkpatch.pl issues to line 2800 Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 2800 Mike Gilks
2010-06-07 8:51 ` [PATCH 3/3] staging: rtl8192u: fix checkpatch.pl issues to line 3000 Fix most problems pointed out by checkpatch.pl in file r8192U_core.c up to line 3000 Mike Gilks
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®