From: Andrew Lunn <andrew@lunn.ch>
To: Goran Radenovic <goran.radni@gmail.com>
Cc: "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Börge Strümpfel" <boerge.struempfel@gmail.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 4/4] ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board
Date: Thu, 8 May 2025 15:51:11 +0200 [thread overview]
Message-ID: <1281b9c4-ff94-4dfc-a531-45e3dbee3dfe@lunn.ch> (raw)
In-Reply-To: <35c08d79-1473-4c1e-b605-627c4ff00a92@gmail.com>
On Thu, May 08, 2025 at 03:10:09PM +0200, Goran Radenovic wrote:
> Hi Andrew,
>
> thank You once again for helpful hint.
>
> Andrew Lunn wrote:
> > > > > + phy-handle = <&phy1>;
> > > > > +
> > > > > + mdio {
> > > > > + #address-cells = <1>;
> > > > > + #size-cells = <0>;
> > > > > + compatible = "snps,dwmac-mdio";
> > > > > + phy1: ethernet-phy@1 {
> > > > > + reg = <1>;
> > > > > + interrupt-parent = <&gpiod>;
> > > > > + interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
> > > > PHY interrupts are 99% time level, not edge.
> > > That is correct, but I am facing strange behavior, when I set
> > > IRQ_TYPE_LEVEL_LOW.
> > > My board stops booting at:
> > >
> > > [ 2.343233] Waiting for root device /dev/mmcblk0p4...
> > > [ 12.638818] platform 5a006000.usbphyc: deferred probe pending
> > > [ 12.643192] platform 49000000.usb-otg: deferred probe pending
> > > [ 12.649029] platform 48003000.adc: deferred probe pending
> > > [ 12.654277] platform 5800d000.usb: deferred probe pending
> > > [ 12.659744] platform 5800c000.usb: deferred probe pending
> > > [ 12.665089] amba 58005000.mmc: deferred probe pending
> > > [ 12.670239] amba 58007000.mmc: deferred probe pending
> > > [ 12.675185] platform 50025000.vrefbuf: deferred probe pending
> > >
> > > I must investigate this. If You have any idea, You are welcome to share it.
> > Could be an interrupt storm. The interrupt is not getting cleared
> > because of something missing in the PHY driver, so it just fires again
> > and again.
>
> After a brief investigation, I tend to agree with your assessment that the
> issue lies in the driver—likely the stmmac driver — which is outside the
> scope of my changes.
>
> Therefore, I would suggest keeping IRQ_TYPE_EDGE_FALLING for now, or
> alternatively not using a hardware IRQ at all and falling back to polling,
> as done in stm32mp15xx-dkx.dtsi.
Since edge is wrong, please use polling.
Andrew
next prev parent reply other threads:[~2025-05-08 13:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20250505115827.29593-1-goran.radni@gmail.com>
2025-05-05 11:58 ` [PATCH v5 1/4] dt-bindings: vendor-prefixes: Add Ultratronik Goran Rađenović
2025-05-05 11:58 ` [PATCH v5 2/4] dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding Goran Rađenović
2025-05-05 11:58 ` [PATCH v5 3/4] MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT Goran Rađenović
2025-05-05 11:58 ` [PATCH v5 4/4] ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board Goran Rađenović
2025-05-05 16:26 ` Andrew Lunn
2025-05-07 11:06 ` Goran Radenovic
2025-05-07 12:53 ` Andrew Lunn
2025-05-08 13:10 ` Goran Radenovic
2025-05-08 13:51 ` Andrew Lunn [this message]
2025-05-12 9:45 ` Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1281b9c4-ff94-4dfc-a531-45e3dbee3dfe@lunn.ch \
--to=andrew@lunn.ch \
--cc=alexandre.torgue@foss.st.com \
--cc=boerge.struempfel@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=goran.radni@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®