From: Ike Panhc <ike.pan@canonical.com>
To: platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: Thomas Renninger <trenn@suse.de>, Alan Cox <alan@linux.intel.com>,
Andrew Morton <akpm@linux-foundation.org>,
Corentin Chary <corentincj@iksaif.net>,
David Woodhouse <David.Woodhouse@intel.com>,
Randy Dunlap <randy.dunlap@oracle.com>,
Len Brown <len.brown@intel.com>, Matthew Garrett <mjg@redhat.com>
Subject: [PATCH 6/8] ideapad: rewrite the hw rfkill notify
Date: Wed, 18 Aug 2010 16:38:25 +0800 [thread overview]
Message-ID: <1282120705-11536-1-git-send-email-ike.pan@canonical.com> (raw)
In-Reply-To: <1282120564-11324-1-git-send-email-ike.pan@canonical.com>
1. Read hw rfkill status by ec command
2. Not to touch sw status of each rfkill when hw rfkill notify
3. Enable RF when module initial
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
---
drivers/platform/x86/ideapad_acpi.c | 45 +++++++----------------------------
1 files changed, 9 insertions(+), 36 deletions(-)
diff --git a/drivers/platform/x86/ideapad_acpi.c b/drivers/platform/x86/ideapad_acpi.c
index a1fdb45..9d0e23f 100644
--- a/drivers/platform/x86/ideapad_acpi.c
+++ b/drivers/platform/x86/ideapad_acpi.c
@@ -162,32 +162,6 @@ static int write_ec_cmd(acpi_handle handle, int cmd, unsigned long data)
}
/* the above is ACPI helpers */
-static int ideapad_dev_get_state(int device)
-{
- acpi_status status;
- union acpi_object in_param;
- struct acpi_object_list input = { 1, &in_param };
- struct acpi_buffer output;
- union acpi_object out_obj;
-
- output.length = sizeof(out_obj);
- output.pointer = &out_obj;
-
- in_param.type = ACPI_TYPE_INTEGER;
- in_param.integer.value = device + 1;
-
- status = acpi_evaluate_object(NULL, "\\_SB_.GECN", &input, &output);
- if (ACPI_FAILURE(status)) {
- printk(KERN_WARNING "IdeaPAD \\_SB_.GECN method failed %d\n", status);
- return -ENODEV;
- }
- if (out_obj.type != ACPI_TYPE_INTEGER) {
- printk(KERN_WARNING "IdeaPAD \\_SB_.GECN method returned unexpected type\n");
- return -ENODEV;
- }
- return out_obj.integer.value;
-}
-
static int ideapad_dev_set_state(int device, int state)
{
acpi_status status;
@@ -255,19 +229,17 @@ static struct rfkill_ops ideapad_rfk_ops = {
static void ideapad_sync_rfk_state(struct acpi_device *adevice)
{
struct ideapad_private *priv = dev_get_drvdata(&adevice->dev);
- int hw_blocked = !ideapad_dev_get_state(IDEAPAD_DEV_KILLSW);
+ acpi_handle handle = priv->handle;
+ unsigned long hw_blocked;
int i;
- rfkill_set_hw_state(priv->rfk[IDEAPAD_DEV_KILLSW], hw_blocked);
- for (i = IDEAPAD_DEV_WLAN; i < IDEAPAD_DEV_KILLSW; i++)
- if (priv->rfk[i])
- rfkill_set_hw_state(priv->rfk[i], hw_blocked);
- if (hw_blocked)
+ if (read_ec_data(handle, 0x23, &hw_blocked))
return;
+ hw_blocked = !hw_blocked;
- for (i = IDEAPAD_DEV_WLAN; i < IDEAPAD_DEV_KILLSW; i++)
+ for (i = IDEAPAD_DEV_WLAN; i <= IDEAPAD_DEV_KILLSW; i++)
if (priv->rfk[i])
- rfkill_set_sw_state(priv->rfk[i], !ideapad_dev_get_state(i));
+ rfkill_set_hw_state(priv->rfk[i], hw_blocked);
}
static int ideapad_register_rfkill(struct acpi_device *adevice, int dev)
@@ -275,12 +247,13 @@ static int ideapad_register_rfkill(struct acpi_device *adevice, int dev)
struct ideapad_private *priv = dev_get_drvdata(&adevice->dev);
int ret;
- priv->rfk[dev] = rfkill_alloc(ideapad_rfk_data[dev-1].name, &adevice->dev,
- ideapad_rfk_data[dev-1].type, &ideapad_rfk_ops,
+ priv->rfk[dev] = rfkill_alloc(ideapad_rfk_data[dev].name, &adevice->dev,
+ ideapad_rfk_data[dev].type, &ideapad_rfk_ops,
(void *)(long)dev);
if (!priv->rfk[dev])
return -ENOMEM;
+ rfkill_init_sw_state(priv->rfk[dev], 0);
ret = rfkill_register(priv->rfk[dev]);
if (ret) {
rfkill_destroy(priv->rfk[dev]);
--
1.7.0.4
next prev parent reply other threads:[~2010-08-18 8:38 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-18 8:36 [PATCH 0/8] [Resend] ideapad: using EC command to control rf/camera power Ike Panhc
2010-08-18 8:36 ` [PATCH 1/8] ideapad: add ACPI helpers Ike Panhc
2010-08-18 8:37 ` [PATCH 2/8] ideapad: check VPC bit before sync rfkill hw status Ike Panhc
2010-08-18 8:37 ` [PATCH 3/8] ideapad: make sure we bind on the correct device Ike Panhc
2010-08-18 13:27 ` Matthew Garrett
2010-08-19 2:51 ` Ike Panhc
2010-08-18 8:38 ` [PATCH 4/8] ideapad: use return value of _CFG to tell if device exist or not Ike Panhc
2010-08-18 8:38 ` [PATCH 5/8] ideapad: use EC command to control camera Ike Panhc
2010-08-18 8:42 ` Oliver Neukum
2010-08-18 8:51 ` Ike Panhc
2010-08-18 8:38 ` Ike Panhc [this message]
2010-08-18 8:38 ` [PATCH 7/8] ideapad: rewrite the sw rfkill set Ike Panhc
2010-08-18 8:38 ` [PATCH 8/8] ideapad: Change the driver name to ideapad_laptop Ike Panhc
2010-08-25 20:56 ` Len Brown
2010-08-26 5:43 ` Corentin Chary
2010-08-26 6:16 ` Ike Panhc
2010-08-26 7:43 ` Corentin Chary
2010-09-01 11:55 ` Ike Panhc
2010-08-18 10:35 ` [PATCH 0/8] [Resend] ideapad: using EC command to control rf/camera power David Woodhouse
2010-08-18 13:04 ` Ike Panhc
2010-08-18 15:51 ` Mario 'BitKoenig' Holbe
2010-08-19 3:21 ` Ike Panhc
2010-08-19 13:28 ` David Woodhouse
2010-08-19 19:31 ` Mario 'BitKoenig' Holbe
2010-08-20 7:01 ` Ike Panhc
2010-08-20 9:08 ` Mario 'BitKoenig' Holbe
2010-08-23 8:22 ` Ike Panhc
2010-08-25 11:59 ` Ike Panhc
2010-08-30 18:19 ` Mario 'BitKoenig' Holbe
2010-09-01 11:49 ` Ike Panhc
2010-09-01 19:56 ` Mario 'BitKoenig' Holbe
2010-09-03 9:06 ` Ike Panhc
2010-09-09 18:17 ` Mario 'BitKoenig' Holbe
2010-09-10 6:44 ` Ike Panhc
2010-09-10 7:11 ` Mario 'BitKoenig' Holbe
2010-09-15 10:13 ` Ike Panhc
2010-09-15 11:48 ` Mario 'BitKoenig' Holbe
2010-09-15 12:39 ` Ike Panhc
2010-09-16 11:59 ` Ike Panhc
2010-09-21 13:47 ` Mario 'BitKoenig' Holbe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1282120705-11536-1-git-send-email-ike.pan@canonical.com \
--to=ike.pan@canonical.com \
--cc=David.Woodhouse@intel.com \
--cc=akpm@linux-foundation.org \
--cc=alan@linux.intel.com \
--cc=corentincj@iksaif.net \
--cc=len.brown@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg@redhat.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=randy.dunlap@oracle.com \
--cc=trenn@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®