* [PATCH] spi/spi_s3c64xx: Warn if PIO transfers time out
@ 2010-08-23 16:40 Mark Brown
2010-08-24 0:06 ` [spi-devel-general] " Jassi Brar
0 siblings, 1 reply; 3+ messages in thread
From: Mark Brown @ 2010-08-23 16:40 UTC (permalink / raw)
To: David Brownell, Grant Likely
Cc: spi-devel-general, linux-kernel, patches, Mark Brown
When using PIO we have a timeout for the TX and RX FIFOs to ensure that
the data actually gets transferred. Warn if we hit that timeout - it
should never happen, but this makes sure we'll find out if it does.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/spi/spi_s3c64xx.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 7e627f7..f72e1c0 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -200,6 +200,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
val = readl(regs + S3C64XX_SPI_STATUS);
} while (TX_FIFO_LVL(val, sci) && loops--);
+ if (loops == 0)
+ dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
+
/* Flush RxFIFO*/
loops = msecs_to_loops(1);
do {
@@ -210,6 +213,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
break;
} while (loops--);
+ if (loops == 0)
+ dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
+
val = readl(regs + S3C64XX_SPI_CH_CFG);
val &= ~S3C64XX_SPI_CH_SW_RST;
writel(val, regs + S3C64XX_SPI_CH_CFG);
--
1.7.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [spi-devel-general] [PATCH] spi/spi_s3c64xx: Warn if PIO transfers time out
2010-08-23 16:40 [PATCH] spi/spi_s3c64xx: Warn if PIO transfers time out Mark Brown
@ 2010-08-24 0:06 ` Jassi Brar
2010-09-08 18:23 ` Grant Likely
0 siblings, 1 reply; 3+ messages in thread
From: Jassi Brar @ 2010-08-24 0:06 UTC (permalink / raw)
To: Mark Brown
Cc: David Brownell, Grant Likely, spi-devel-general, patches, linux-kernel
On Tue, Aug 24, 2010 at 1:40 AM, Mark Brown
<broonie@opensource.wolfsonmicro.com> wrote:
> When using PIO we have a timeout for the TX and RX FIFOs to ensure that
> the data actually gets transferred. Warn if we hit that timeout - it
> should never happen, but this makes sure we'll find out if it does.
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> drivers/spi/spi_s3c64xx.c | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
> index 7e627f7..f72e1c0 100644
> --- a/drivers/spi/spi_s3c64xx.c
> +++ b/drivers/spi/spi_s3c64xx.c
> @@ -200,6 +200,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
> val = readl(regs + S3C64XX_SPI_STATUS);
> } while (TX_FIFO_LVL(val, sci) && loops--);
>
> + if (loops == 0)
> + dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
> +
> /* Flush RxFIFO*/
> loops = msecs_to_loops(1);
> do {
> @@ -210,6 +213,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
> break;
> } while (loops--);
>
> + if (loops == 0)
> + dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
> +
> val = readl(regs + S3C64XX_SPI_CH_CFG);
> val &= ~S3C64XX_SPI_CH_SW_RST;
> writel(val, regs + S3C64XX_SPI_CH_CFG);
Ok, though I'll be very surprised to see the FIFO flush failing. We
are not waiting
for data to be transferred, but for SW Reset to make its effect.
Acked-by: Jassi Brar <jassi.brar@samsung.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [spi-devel-general] [PATCH] spi/spi_s3c64xx: Warn if PIO transfers time out
2010-08-24 0:06 ` [spi-devel-general] " Jassi Brar
@ 2010-09-08 18:23 ` Grant Likely
0 siblings, 0 replies; 3+ messages in thread
From: Grant Likely @ 2010-09-08 18:23 UTC (permalink / raw)
To: Jassi Brar
Cc: Mark Brown, David Brownell, spi-devel-general, patches, linux-kernel
On Tue, Aug 24, 2010 at 09:06:40AM +0900, Jassi Brar wrote:
> On Tue, Aug 24, 2010 at 1:40 AM, Mark Brown
> <broonie@opensource.wolfsonmicro.com> wrote:
> > When using PIO we have a timeout for the TX and RX FIFOs to ensure that
> > the data actually gets transferred. Warn if we hit that timeout - it
> > should never happen, but this makes sure we'll find out if it does.
> >
> > Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> > ---
> > drivers/spi/spi_s3c64xx.c | 6 ++++++
> > 1 files changed, 6 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
> > index 7e627f7..f72e1c0 100644
> > --- a/drivers/spi/spi_s3c64xx.c
> > +++ b/drivers/spi/spi_s3c64xx.c
> > @@ -200,6 +200,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
> > val = readl(regs + S3C64XX_SPI_STATUS);
> > } while (TX_FIFO_LVL(val, sci) && loops--);
> >
> > + if (loops == 0)
> > + dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
> > +
> > /* Flush RxFIFO*/
> > loops = msecs_to_loops(1);
> > do {
> > @@ -210,6 +213,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
> > break;
> > } while (loops--);
> >
> > + if (loops == 0)
> > + dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
> > +
> > val = readl(regs + S3C64XX_SPI_CH_CFG);
> > val &= ~S3C64XX_SPI_CH_SW_RST;
> > writel(val, regs + S3C64XX_SPI_CH_CFG);
>
> Ok, though I'll be very surprised to see the FIFO flush failing. We
> are not waiting
> for data to be transferred, but for SW Reset to make its effect.
>
> Acked-by: Jassi Brar <jassi.brar@samsung.com>
Applied, thanks.
g.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-09-08 18:23 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-08-23 16:40 [PATCH] spi/spi_s3c64xx: Warn if PIO transfers time out Mark Brown
2010-08-24 0:06 ` [spi-devel-general] " Jassi Brar
2010-09-08 18:23 ` Grant Likely
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®