From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Jiri Slaby <jslaby@suse.cz>, Kulikov Vasiliy <segooon@gmail.com>,
Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 19/49] Char: mxser, call pci_disable_device from probe/remove
Date: Fri, 22 Oct 2010 11:20:58 -0700 [thread overview]
Message-ID: <1287771688-14805-19-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20101022175112.GC13489@kroah.com>
From: Jiri Slaby <jslaby@suse.cz>
Vasiliy found that pci_disable_device is not called on fail paths in
mxser_probe. Actually, it is called from nowhere in the driver.
There are three changes needed:
1) don't use pseudo-generic mxser_release_res. Let's use it only from
ISA paths from now on. All the pci stuff is moved to probe and
remove PCI-related functions.
2) reorder fail-paths in the probe function so that it makes sense and
we can call them from the sequential code naturally (the further we
are the earlier label we go to).
3) add pci_disable_device both to mxser_probe and mxser_remove.
There is a nit of adding CONFIG_PCI ifdef to mxser_remove. it is
because this driver supports ISA-only compilations and it would choke
up on the newly added calls now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/mxser.c | 47 ++++++++++++++++++++++-------------------------
1 files changed, 22 insertions(+), 25 deletions(-)
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 3fc89da..9d243de 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -2339,20 +2339,11 @@ struct tty_port_operations mxser_port_ops = {
* The MOXA Smartio/Industio serial driver boot-time initialization code!
*/
-static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev,
- unsigned int irq)
+static void mxser_release_ISA_res(struct mxser_board *brd)
{
- if (irq)
- free_irq(brd->irq, brd);
- if (pdev != NULL) { /* PCI */
-#ifdef CONFIG_PCI
- pci_release_region(pdev, 2);
- pci_release_region(pdev, 3);
-#endif
- } else {
- release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
- release_region(brd->vector, 1);
- }
+ free_irq(brd->irq, brd);
+ release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+ release_region(brd->vector, 1);
}
static int __devinit mxser_initbrd(struct mxser_board *brd,
@@ -2397,13 +2388,11 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
brd);
- if (retval) {
+ if (retval)
printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
"conflict with another device.\n",
brd->info->name, brd->irq);
- /* We hold resources, we need to release them. */
- mxser_release_res(brd, pdev, 0);
- }
+
return retval;
}
@@ -2555,7 +2544,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 2);
retval = pci_request_region(pdev, 2, "mxser(IO)");
if (retval)
- goto err;
+ goto err_dis;
brd->info = &mxser_cards[ent->driver_data];
for (i = 0; i < brd->info->nports; i++)
@@ -2565,7 +2554,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 3);
retval = pci_request_region(pdev, 3, "mxser(vector)");
if (retval)
- goto err_relio;
+ goto err_zero;
brd->vector = ioaddress;
/* irq */
@@ -2608,7 +2597,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
/* mxser_initbrd will hook ISR. */
retval = mxser_initbrd(brd, pdev);
if (retval)
- goto err_null;
+ goto err_rel3;
for (i = 0; i < brd->info->nports; i++)
tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
@@ -2616,10 +2605,13 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, brd);
return 0;
-err_relio:
- pci_release_region(pdev, 2);
-err_null:
+err_rel3:
+ pci_release_region(pdev, 3);
+err_zero:
brd->info = NULL;
+ pci_release_region(pdev, 2);
+err_dis:
+ pci_disable_device(pdev);
err:
return retval;
#else
@@ -2629,14 +2621,19 @@ err:
static void __devexit mxser_remove(struct pci_dev *pdev)
{
+#ifdef CONFIG_PCI
struct mxser_board *brd = pci_get_drvdata(pdev);
unsigned int i;
for (i = 0; i < brd->info->nports; i++)
tty_unregister_device(mxvar_sdriver, brd->idx + i);
- mxser_release_res(brd, pdev, 1);
+ free_irq(pdev->irq, brd);
+ pci_release_region(pdev, 2);
+ pci_release_region(pdev, 3);
+ pci_disable_device(pdev);
brd->info = NULL;
+#endif
}
static struct pci_driver mxser_driver = {
@@ -2741,7 +2738,7 @@ static void __exit mxser_module_exit(void)
for (i = 0; i < MXSER_BOARDS; i++)
if (mxser_boards[i].info != NULL)
- mxser_release_res(&mxser_boards[i], NULL, 1);
+ mxser_release_ISA_res(&mxser_boards[i]);
}
module_init(mxser_module_init);
--
1.7.2
next prev parent reply other threads:[~2010-10-22 18:37 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-22 17:51 [GIT PATCH] TTY/Serial merge for .37-rc1 Greg KH
2010-10-22 18:20 ` [PATCH 01/49] tty: add tty_struct->dev pointer to corresponding device instance Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 02/49] serport: place serport serio device correctly in the device tree Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 03/49] serial: mfd: snprintf() returns largish values Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 04/49] serial: Add CONSOLE_POLL support for uartlite Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 05/49] tty: Remove __GFP_NOFAIL from tty_add_file() Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 06/49] ioctl: Use asm-generic/ioctls.h on arm (enables termiox) Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 07/49] ioctl: Use asm-generic/ioctls.h on avr32 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 08/49] ioctl: Use asm-generic/ioctls.h on cris " Greg Kroah-Hartman
2010-10-25 14:10 ` Jesper Nilsson
2010-10-22 18:20 ` [PATCH 09/49] ioctl: Use asm-generic/ioctls.h on frv " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 10/49] ioctl: Use asm-generic/ioctls.h on h8300 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 11/49] ioctl: Use asm-generic/ioctls.h on ia64 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 12/49] ioctl: Use asm-generic/ioctls.h on m32r " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 13/49] ioctl: Use asm-generic/ioctls.h on m68k " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 14/49] ioctl: Use asm-generic/ioctls.h on mn10300 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 15/49] ioctl: Use asm-generic/ioctls.h on s390 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 16/49] serial-core: skip call set_termios/console_start when no_console_suspend Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 17/49] serial-core: restore termios settings when resume console ports Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 18/49] add ttyprintk driver Greg Kroah-Hartman
2010-10-22 18:20 ` Greg Kroah-Hartman [this message]
2010-10-22 18:20 ` [PATCH 20/49] tty_io: check return code of tty_register_device Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 21/49] serial: mrst_max3110: some code cleanup Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 22/49] serial: mrst_max3110: Make the IRQ option runtime Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 23/49] serial: max3107: Fix memory leaks when returning on error Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 24/49] tty: Make tiocgicount a handler Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 25/49] tty: Convert the USB drivers to the new icount interface Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 26/49] tty: icount changeover for other main devices Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 27/49] tty: Fix warning left over from TIOCGICOUNT changes Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 28/49] tty: Add a new file /proc/tty/consoles Greg Kroah-Hartman
2010-10-23 11:24 ` Jiri Slaby
2010-10-23 11:40 ` Jiri Slaby
2010-10-23 11:51 ` Al Viro
2010-10-23 12:00 ` Jiri Slaby
2010-10-23 12:26 ` Al Viro
2010-10-23 15:46 ` Greg KH
2010-10-23 16:53 ` Greg KH
2010-10-23 17:03 ` Greg KH
2010-10-23 12:04 ` Al Viro
2010-10-25 7:51 ` Dr. Werner Fink
2010-10-27 0:50 ` Al Viro
2010-10-27 9:27 ` Dr. Werner Fink
2010-10-27 9:51 ` Jiri Slaby
2010-10-27 11:31 ` Dr. Werner Fink
2010-10-23 11:46 ` Christoph Hellwig
2010-10-22 18:21 ` [PATCH 29/49] vcs: add poll/fasync support Greg Kroah-Hartman
2010-11-10 0:12 ` Kay Sievers
2010-11-10 1:26 ` Nicolas Pitre
2010-11-10 1:42 ` Kay Sievers
2010-11-10 6:33 ` Nicolas Pitre
2010-11-10 9:35 ` Kay Sievers
2010-10-22 18:21 ` [PATCH 30/49] vcs: invoke the vt update callback when /dev/vcs* is written to Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 31/49] tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 32/49] serial: 8250: Don't delay after transmitter is ready Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 33/49] serial: mark the 8250 driver as maintained Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 34/49] serial: Factor out uart_poll_timeout() from 8250 driver Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 35/49] altera_uart: Add support for polling mode (IRQ-less) Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 36/49] altera_uart: Add support for getting mapbase and IRQ from resources Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 37/49] altera_uart: Add support for different address strides Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 38/49] altera_uart: Make it possible to use Altera UART and 8250 ports together Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 39/49] altera_uart: Fixup type usage of port flags Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 40/49] altera_uart: Fix missing prototype for registering an early console Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 41/49] altera_uart: Don't use plain integer as NULL pointer Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 42/49] 8250: allow platforms to override PM hook Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 43/49] Alchemy: Add UART PM methods Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 44/49] jsm: Remove the uart port on errors Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 45/49] serial: mfd: add more baud rates support Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 46/49] serial/imx: check that the buffer is non-empty before sending it out Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 47/49] serial: abstraction for 8250 legacy ports Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 48/49] serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 49/49] serial8250: ratelimit "too much work" error Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287771688-14805-19-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=segooon@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®