From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Jeff Mahoney <jeffm@suse.com>,
David Howells <dhowells@redhat.com>,
Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 09/49] ioctl: Use asm-generic/ioctls.h on frv (enables termiox)
Date: Fri, 22 Oct 2010 11:20:48 -0700 [thread overview]
Message-ID: <1287771688-14805-9-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20101022175112.GC13489@kroah.com>
From: Jeff Mahoney <jeffm@suse.com>
This patch converts frv to use asm-generic/ioctls.h instead of its
own version.
The differences between the arch-specific version and the generic
version are as follows:
- FRV defines its own value for FIOQSIZE, asm-generic/ioctls.h keeps it
- FRV defines TIOCTTYGSTRUCT, kept in arch-specific version
- The generic version provides TIOCGRS485 and TIOCSRS485 but they
are unused by any driver available for this architecture.
- The generic version adds support for termiox
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
arch/frv/include/asm/ioctls.h | 80 +----------------------------------------
1 files changed, 1 insertions(+), 79 deletions(-)
diff --git a/arch/frv/include/asm/ioctls.h b/arch/frv/include/asm/ioctls.h
index a993e37..2f9fb43 100644
--- a/arch/frv/include/asm/ioctls.h
+++ b/arch/frv/include/asm/ioctls.h
@@ -1,88 +1,10 @@
#ifndef __ASM_IOCTLS_H__
#define __ASM_IOCTLS_H__
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
#define FIOQSIZE 0x545E
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-#define TIOCPKT_IOCTL 64
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
#endif /* __ASM_IOCTLS_H__ */
--
1.7.2
next prev parent reply other threads:[~2010-10-22 18:21 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-22 17:51 [GIT PATCH] TTY/Serial merge for .37-rc1 Greg KH
2010-10-22 18:20 ` [PATCH 01/49] tty: add tty_struct->dev pointer to corresponding device instance Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 02/49] serport: place serport serio device correctly in the device tree Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 03/49] serial: mfd: snprintf() returns largish values Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 04/49] serial: Add CONSOLE_POLL support for uartlite Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 05/49] tty: Remove __GFP_NOFAIL from tty_add_file() Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 06/49] ioctl: Use asm-generic/ioctls.h on arm (enables termiox) Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 07/49] ioctl: Use asm-generic/ioctls.h on avr32 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 08/49] ioctl: Use asm-generic/ioctls.h on cris " Greg Kroah-Hartman
2010-10-25 14:10 ` Jesper Nilsson
2010-10-22 18:20 ` Greg Kroah-Hartman [this message]
2010-10-22 18:20 ` [PATCH 10/49] ioctl: Use asm-generic/ioctls.h on h8300 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 11/49] ioctl: Use asm-generic/ioctls.h on ia64 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 12/49] ioctl: Use asm-generic/ioctls.h on m32r " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 13/49] ioctl: Use asm-generic/ioctls.h on m68k " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 14/49] ioctl: Use asm-generic/ioctls.h on mn10300 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 15/49] ioctl: Use asm-generic/ioctls.h on s390 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 16/49] serial-core: skip call set_termios/console_start when no_console_suspend Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 17/49] serial-core: restore termios settings when resume console ports Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 18/49] add ttyprintk driver Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 19/49] Char: mxser, call pci_disable_device from probe/remove Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 20/49] tty_io: check return code of tty_register_device Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 21/49] serial: mrst_max3110: some code cleanup Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 22/49] serial: mrst_max3110: Make the IRQ option runtime Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 23/49] serial: max3107: Fix memory leaks when returning on error Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 24/49] tty: Make tiocgicount a handler Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 25/49] tty: Convert the USB drivers to the new icount interface Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 26/49] tty: icount changeover for other main devices Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 27/49] tty: Fix warning left over from TIOCGICOUNT changes Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 28/49] tty: Add a new file /proc/tty/consoles Greg Kroah-Hartman
2010-10-23 11:24 ` Jiri Slaby
2010-10-23 11:40 ` Jiri Slaby
2010-10-23 11:51 ` Al Viro
2010-10-23 12:00 ` Jiri Slaby
2010-10-23 12:26 ` Al Viro
2010-10-23 15:46 ` Greg KH
2010-10-23 16:53 ` Greg KH
2010-10-23 17:03 ` Greg KH
2010-10-23 12:04 ` Al Viro
2010-10-25 7:51 ` Dr. Werner Fink
2010-10-27 0:50 ` Al Viro
2010-10-27 9:27 ` Dr. Werner Fink
2010-10-27 9:51 ` Jiri Slaby
2010-10-27 11:31 ` Dr. Werner Fink
2010-10-23 11:46 ` Christoph Hellwig
2010-10-22 18:21 ` [PATCH 29/49] vcs: add poll/fasync support Greg Kroah-Hartman
2010-11-10 0:12 ` Kay Sievers
2010-11-10 1:26 ` Nicolas Pitre
2010-11-10 1:42 ` Kay Sievers
2010-11-10 6:33 ` Nicolas Pitre
2010-11-10 9:35 ` Kay Sievers
2010-10-22 18:21 ` [PATCH 30/49] vcs: invoke the vt update callback when /dev/vcs* is written to Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 31/49] tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 32/49] serial: 8250: Don't delay after transmitter is ready Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 33/49] serial: mark the 8250 driver as maintained Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 34/49] serial: Factor out uart_poll_timeout() from 8250 driver Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 35/49] altera_uart: Add support for polling mode (IRQ-less) Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 36/49] altera_uart: Add support for getting mapbase and IRQ from resources Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 37/49] altera_uart: Add support for different address strides Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 38/49] altera_uart: Make it possible to use Altera UART and 8250 ports together Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 39/49] altera_uart: Fixup type usage of port flags Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 40/49] altera_uart: Fix missing prototype for registering an early console Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 41/49] altera_uart: Don't use plain integer as NULL pointer Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 42/49] 8250: allow platforms to override PM hook Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 43/49] Alchemy: Add UART PM methods Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 44/49] jsm: Remove the uart port on errors Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 45/49] serial: mfd: add more baud rates support Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 46/49] serial/imx: check that the buffer is non-empty before sending it out Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 47/49] serial: abstraction for 8250 legacy ports Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 48/49] serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 49/49] serial8250: ratelimit "too much work" error Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287771688-14805-9-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=dhowells@redhat.com \
--cc=jeffm@suse.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®