[PATCH 02/31] Dynamic Debug: Introduce ddebug_query= boot parameter

[Greg Kroah-Hartman <gregkh@suse.de>]

From: Thomas Renninger <trenn@suse.de>

Dynamic debug lacks the ability to enable debug messages at boot time.
One could patch initramfs or service startup scripts to write to
/sys/../dynamic_debug/control, but this sucks.

This patch makes it possible to pass a query in the same format one can
write to /sys/../dynamic_debug/control via boot param.
When dynamic debug gets initialized, this query will automatically be
applied.


Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: jbaron@redhat.com
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/dynamic-debug-howto.txt |   22 +++++++++++++++++++++-
 Documentation/kernel-parameters.txt   |    7 ++++++-
 lib/dynamic_debug.c                   |   25 +++++++++++++++++++++++++
 3 files changed, 52 insertions(+), 2 deletions(-)

diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt
index 674c566..58ea64a 100644
--- a/Documentation/dynamic-debug-howto.txt
+++ b/Documentation/dynamic-debug-howto.txt
@@ -24,7 +24,7 @@ Dynamic debug has even more useful features:
    read to display the complete list of known debug statements, to help guide you
 
 Controlling dynamic debug Behaviour
-===============================
+===================================
 
 The behaviour of pr_debug()/dev_debug()s are controlled via writing to a
 control file in the 'debugfs' filesystem. Thus, you must first mount the debugfs
@@ -212,6 +212,26 @@ Note the regexp ^[-+=][scp]+$ matches a flags specification.
 Note also that there is no convenient syntax to remove all
 the flags at once, you need to use "-psc".
 
+
+Debug messages during boot process
+==================================
+
+To be able to activate debug messages during the boot process,
+even before userspace and debugfs exists, use the boot parameter:
+ddebug_query="QUERY"
+
+QUERY follows the syntax described above, but must not exceed 1023
+characters. The enablement of debug messages is done as an arch_initcall.
+Thus you can enable debug messages in all code processed after this
+arch_initcall via this boot parameter.
+On an x86 system for example ACPI enablement is a subsys_initcall and
+ddebug_query="file ec.c +p"
+will show early Embedded Controller transactions during ACPI setup if
+your machine (typically a laptop) has an Embedded Controller.
+PCI (or other devices) initialization also is a hot candidate for using
+this boot parameter for debugging purposes.
+
+
 Examples
 ========
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8dd7248..3d854c9 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -43,10 +43,11 @@ parameter is applicable:
 	AVR32	AVR32 architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	BLACKFIN Blackfin architecture is enabled.
-	DRM	Direct Rendering Management support is enabled.
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
 	EIDE	EIDE/ATAPI support is enabled.
+	DRM	Direct Rendering Management support is enabled.
+	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	FB	The frame buffer device is enabled.
 	GCOV	GCOV profiling is enabled.
 	HW	Appropriate hardware is enabled.
@@ -570,6 +571,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: <port#>,<type>
 			See also Documentation/input/joystick-parport.txt
 
+	ddebug_query=   [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
+			time. See Documentation/dynamic-debug-howto.txt for
+			details.
+
 	debug		[KNL] Enable kernel debugging (events log level).
 
 	debug_locks_verbose=
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 84d103c4..44ce66b 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -450,6 +450,19 @@ static int ddebug_exec_query(char *query_string)
 	return 0;
 }
 
+static __initdata char ddebug_setup_string[1024];
+static __init int ddebug_setup_query(char *str)
+{
+	if (strlen(str) >= 1024) {
+		pr_warning("ddebug boot param string too large\n");
+		return 0;
+	}
+	strcpy(ddebug_setup_string, str);
+	return 1;
+}
+
+__setup("ddebug_query=", ddebug_setup_query);
+
 /*
  * File_ops->write method for <debugfs>/dynamic_debug/conrol.  Gathers the
  * command text from userspace, parses and executes it.
@@ -769,6 +782,18 @@ static int __init dynamic_debug_init(void)
 		}
 		ret = ddebug_add_module(iter_start, n, modname);
 	}
+
+	/* ddebug_query boot param got passed -> set it up */
+	if (ddebug_setup_string[0] != '\0') {
+		ret = ddebug_exec_query(ddebug_setup_string);
+		if (ret)
+			pr_warning("Invalid ddebug boot param %s",
+				   ddebug_setup_string);
+		else
+			pr_info("ddebug initialized with string %s",
+				ddebug_setup_string);
+	}
+
 out_free:
 	if (ret) {
 		ddebug_remove_all_tables();
-- 
1.7.2