From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Thomas Renninger <trenn@suse.de>,
linux-acpi@vger.kernel.org, Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 03/31] Dynamic Debug: Initialize dynamic debug earlier via arch_initcall
Date: Fri, 22 Oct 2010 11:24:48 -0700 [thread overview]
Message-ID: <1287771916-15016-3-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20101022175107.GB13489@kroah.com>
From: Thomas Renninger <trenn@suse.de>
Having the ddebug_query= boot parameter it makes sense to set up
dynamic debug as soon as possible.
I expect sysfs files cannot be set up via an arch_initcall, because
this one is even before fs_initcall. Therefore I splitted the
dynamic_debug_init function into an early one and a later one providing
/sys/../dynamic_debug/control file.
Possibly dynamic_debug can be initialized even earlier, not sure whether
this still makes sense then. I picked up arch_initcall as it covers
quite a lot already.
Dynamic debug needs to allocate memory, therefore it's not easily possible to
set it up even before the command line gets parsed.
Therefore the boot param query string is stored in a temp string which is
applied when dynamic debug gets set up.
This has been tested with ddebug_query="file ec.c +p"
and I could retrieve pr_debug() messages early at boot during ACPI setup:
ACPI: EC: Look up EC in DSDT
ACPI: EC: ---> status = 0x08
ACPI: EC: transaction start
ACPI: EC: <--- command = 0x80
ACPI: EC: ~~~> interrupt
ACPI: EC: ---> status = 0x08
ACPI: EC: <--- data = 0xa4
...
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: ---> status = 0x00
ACPI: EC: transaction start
ACPI: EC: <--- command = 0x80
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: jbaron@redhat.com
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
CC: linux-acpi@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
lib/dynamic_debug.c | 33 +++++++++++++++++++++++----------
1 files changed, 23 insertions(+), 10 deletions(-)
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 44ce66b..a687d90 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -748,13 +748,14 @@ static void ddebug_remove_all_tables(void)
mutex_unlock(&ddebug_lock);
}
-static int __init dynamic_debug_init(void)
+static __initdata int ddebug_init_success;
+
+static int __init dynamic_debug_init_debugfs(void)
{
struct dentry *dir, *file;
- struct _ddebug *iter, *iter_start;
- const char *modname = NULL;
- int ret = 0;
- int n = 0;
+
+ if (!ddebug_init_success)
+ return -ENODEV;
dir = debugfs_create_dir("dynamic_debug", NULL);
if (!dir)
@@ -765,6 +766,16 @@ static int __init dynamic_debug_init(void)
debugfs_remove(dir);
return -ENOMEM;
}
+ return 0;
+}
+
+static int __init dynamic_debug_init(void)
+{
+ struct _ddebug *iter, *iter_start;
+ const char *modname = NULL;
+ int ret = 0;
+ int n = 0;
+
if (__start___verbose != __stop___verbose) {
iter = __start___verbose;
modname = iter->modname;
@@ -795,11 +806,13 @@ static int __init dynamic_debug_init(void)
}
out_free:
- if (ret) {
+ if (ret)
ddebug_remove_all_tables();
- debugfs_remove(dir);
- debugfs_remove(file);
- }
+ else
+ ddebug_init_success = 1;
return 0;
}
-module_init(dynamic_debug_init);
+/* Allow early initialization for boot messages via boot param */
+arch_initcall(dynamic_debug_init);
+/* Debugfs setup must be done later */
+module_init(dynamic_debug_init_debugfs);
--
1.7.2
next prev parent reply other threads:[~2010-10-22 18:25 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-22 17:51 [GIT PATCH] driver core merge for .37-rc1 Greg KH
2010-10-22 18:24 ` [PATCH 01/31] Dynamic Debug: Split out query string parsing/setup from proc_write Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 02/31] Dynamic Debug: Introduce ddebug_query= boot parameter Greg Kroah-Hartman
2010-10-22 18:24 ` Greg Kroah-Hartman [this message]
2010-10-22 18:24 ` [PATCH 04/31] driver core: platform: Use drv->driver.bus instead of assuming platform_bus_type Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 05/31] uio: do not use PCI resources before pci_enable_device() Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 06/31] driver core: platform_bus: allow runtime override of dev_pm_ops Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 07/31] add Packet hub driver for Topcliff Platform controller hub Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 08/31] pch_phub: fix build warnings Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 09/31] debugfs: mark me as the maintainer Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 10/31] base/platform: Safe handling for NULL platform data and resources Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 11/31] base/platform: Simplifications for NULL platform data/resources handling Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 12/31] driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 13/31] SYSFS: Allow boot time switching between deprecated and modern sysfs layout Greg Kroah-Hartman
2010-10-22 18:24 ` [PATCH 14/31] uio: Fix lack of locking in init_uio_class Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 15/31] uio: Don't clear driver data Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 16/31] uio: Cleanup irq handling Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 17/31] uio: Support 2^MINOR_BITS minors Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 18/31] uio: Statically allocate uio_class and use class .dev_attrs Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 19/31] FW_LOADER: fix kconfig dependency warning on HOTPLUG Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 20/31] sysfs: Fail bin file mmap if vma close is implemented Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 21/31] sysfs: only access bin file vm_ops with the active lock Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 22/31] driver-core: base: change to new flag variable Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 23/31] driver core: fix build for CONFIG_BLOCK not enabled Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 24/31] kobject: Introduce kset_find_obj_hinted Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 25/31] driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 26/31] driver core: Convert link_mem_sections to use find_memory_block_hinted Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 27/31] hpilo: Despecificate driver from iLO generation Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 28/31] Driver core: Move find_memory_block routine Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 29/31] Driver core: Add mutex for adding/removing memory blocks Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 30/31] Driver core: Add section count to memory_block struct Greg Kroah-Hartman
2010-10-22 18:25 ` [PATCH 31/31] driver core: Display error codes when class suspend fails Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287771916-15016-3-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=trenn@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome