From: Ike Panhc <ike.pan@canonical.com>
To: linux-kernel@vger.kernel.org, platform-driver-x86@vger.kernel.org
Cc: Matthew Garrett <mjg@redhat.com>, David Woodhouse <dwmw2@infradead.org>
Subject: [PATCH 2/3] ideapad: let camera power control entry under platform driver
Date: Wed, 17 Nov 2010 15:00:27 +0800 [thread overview]
Message-ID: <1289977227-15051-1-git-send-email-ike.pan@canonical.com> (raw)
In-Reply-To: <1289977165-14802-1-git-send-email-ike.pan@canonical.com>
The entry was at /sys/devices/LNXSYSTM:00/../VPC2004:00/camera_power
move to /sys/devices/platform/Ideapad/camera_power
Signed-off-by: Ike Panhc <ike.pan@canonical.com>
---
drivers/platform/x86/ideapad-laptop.c | 55 +++++++++++++++------------------
1 files changed, 25 insertions(+), 30 deletions(-)
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 26edbdb..d75c21f 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -282,6 +282,15 @@ static void ideapad_unregister_rfkill(struct acpi_device *adevice, int dev)
/*
* Platform device
*/
+static struct attribute *ideapad_attributes[] = {
+ &dev_attr_camera_power.attr,
+ NULL
+};
+
+static struct attribute_group ideapad_attribute_group = {
+ .attrs = ideapad_attributes
+};
+
static int ideapad_platform_init(void)
{
int result;
@@ -295,8 +304,14 @@ static int ideapad_platform_init(void)
if (result)
goto fail_platform_device;
+ result = sysfs_create_group(&ideapad_priv->platform_device->dev.kobj,
+ &ideapad_attribute_group);
+ if (result)
+ goto fail_sysfs;
return 0;
+fail_sysfs:
+ platform_device_del(ideapad_priv->platform_device);
fail_platform_device:
platform_device_put(ideapad_priv->platform_device);
return result;
@@ -304,6 +319,8 @@ fail_platform_device:
static void ideapad_platform_exit(void)
{
+ sysfs_remove_group(&ideapad_priv->platform_device->dev.kobj,
+ &ideapad_attribute_group);
platform_device_unregister(ideapad_priv->platform_device);
}
/* the above is platform device */
@@ -317,50 +334,30 @@ MODULE_DEVICE_TABLE(acpi, ideapad_device_ids);
static int ideapad_acpi_add(struct acpi_device *adevice)
{
int ret, i, cfg;
- int devs_present[5];
struct ideapad_private *priv;
if (read_method_int(adevice->handle, "_CFG", &cfg))
return -ENODEV;
- for (i = IDEAPAD_DEV_CAMERA; i < IDEAPAD_DEV_KILLSW; i++) {
- if (test_bit(ideapad_rfk_data[i].cfgbit, (unsigned long *)&cfg))
- devs_present[i] = 1;
- else
- devs_present[i] = 0;
- }
-
- /* The hardware switch is always present */
- devs_present[IDEAPAD_DEV_KILLSW] = 1;
-
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
ideapad_priv = priv;
+ priv->handle = adevice->handle;
+ dev_set_drvdata(&adevice->dev, priv);
ret = ideapad_platform_init();
if (ret)
goto platform_failed;
- if (devs_present[IDEAPAD_DEV_CAMERA]) {
- ret = device_create_file(&adevice->dev, &dev_attr_camera_power);
- if (ret)
- goto camera_failed;
- }
-
- priv->handle = adevice->handle;
- dev_set_drvdata(&adevice->dev, priv);
- for (i = IDEAPAD_DEV_WLAN; i <= IDEAPAD_DEV_KILLSW; i++) {
- if (!devs_present[i])
- continue;
-
- ideapad_register_rfkill(adevice, i);
+ for (i = IDEAPAD_DEV_WLAN; i < IDEAPAD_DEV_KILLSW; i++) {
+ if (test_bit(ideapad_rfk_data[i].cfgbit, (unsigned long *)&cfg))
+ ideapad_register_rfkill(adevice, i);
}
ideapad_sync_rfk_state(adevice);
+
return 0;
-camera_failed:
- ideapad_platform_exit();
platform_failed:
kfree(priv);
return ret;
@@ -371,14 +368,12 @@ static int ideapad_acpi_remove(struct acpi_device *adevice, int type)
struct ideapad_private *priv = dev_get_drvdata(&adevice->dev);
int i;
- device_remove_file(&adevice->dev, &dev_attr_camera_power);
-
- for (i = IDEAPAD_DEV_WLAN; i <= IDEAPAD_DEV_KILLSW; i++)
+ for (i = IDEAPAD_DEV_WLAN; i < IDEAPAD_DEV_KILLSW; i++)
ideapad_unregister_rfkill(adevice, i);
-
ideapad_platform_exit();
dev_set_drvdata(&adevice->dev, NULL);
kfree(priv);
+
return 0;
}
--
1.7.1
next prev parent reply other threads:[~2010-11-17 7:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-17 6:59 [PATCH 0/3] ideapad: hotkey enablement Ike Panhc
2010-11-17 7:00 ` [PATCH 1/3] ideapad: add platform driver for ideapad Ike Panhc
2010-11-17 7:00 ` Ike Panhc [this message]
2010-11-17 7:00 ` [PATCH 3/3] ideapad: add hotkey support Ike Panhc
2010-11-17 21:29 ` Dmitry Torokhov
2010-11-18 7:35 ` Corentin Chary
2010-11-19 7:09 ` Ike Panhc
2010-12-02 23:41 ` Dave Hansen
2010-12-02 23:43 ` Ike Panhc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1289977227-15051-1-git-send-email-ike.pan@canonical.com \
--to=ike.pan@canonical.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg@redhat.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®