From: Corentin Chary <corentin.chary@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ike Panhc <ike.pan@canonical.com>,
linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org,
Matthew Garrett <mjg@redhat.com>,
David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH 3/3] ideapad: add hotkey support
Date: Thu, 18 Nov 2010 08:35:58 +0100 [thread overview]
Message-ID: <AANLkTim1DKZkCqB1mLg5=7UTd2szCoSS_DSO8v3jHTmy@mail.gmail.com> (raw)
In-Reply-To: <20101117212943.GA6661@core.coreip.homeip.net>
On Wed, Nov 17, 2010 at 10:29 PM, Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
> On Wed, Nov 17, 2010 at 03:00:38PM +0800, Ike Panhc wrote:
>> Hotkey enabled by this patch:
>> Fn+F3: Video mode switch
>> Fn+F5: software rfkill for wifi
>>
>> For some ideapad when push Fn+F3, hardware generates Super-P keys, those key
>> will not be enabled by this patch.
>>
>> Signed-off-by: Ike Panhc <ike.pan@canonical.com>
>> ---
>> drivers/platform/x86/ideapad-laptop.c | 74 +++++++++++++++++++++++++++++++++
>> 1 files changed, 74 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
>> index d75c21f..d397034 100644
>> --- a/drivers/platform/x86/ideapad-laptop.c
>> +++ b/drivers/platform/x86/ideapad-laptop.c
>> @@ -28,6 +28,8 @@
>> #include <acpi/acpi_drivers.h>
>> #include <linux/rfkill.h>
>> #include <linux/platform_device.h>
>> +#include <linux/input.h>
>> +#include <linux/input/sparse-keymap.h>
>>
>> #define IDEAPAD_DEV_CAMERA 0
>> #define IDEAPAD_DEV_WLAN 1
>> @@ -39,6 +41,7 @@ struct ideapad_private {
>> acpi_handle handle;
>> struct rfkill *rfk[5];
>> struct platform_device *platform_device;
>> + struct input_dev *inputdev;
>> } *ideapad_priv;
>>
>> static struct {
>> @@ -325,6 +328,68 @@ static void ideapad_platform_exit(void)
>> }
>> /* the above is platform device */
>>
>> +/*
>> + * input device
>> + */
>> +static const struct key_entry ideapad_keymap[] = {
>> + { KE_KEY, 0x06, { KEY_SWITCHVIDEOMODE } },
>> + { KE_KEY, 0x0D, { KEY_WLAN } },
>> + { KE_END, 0 },
>> +};
>> +
>> +static int ideapad_input_init(void)
>
> __devinit?
>
>> +{
>> + struct input_dev *inputdev;
>> + int error;
>> +
>> + inputdev = input_allocate_device();
>> + if (!inputdev) {
>> + pr_info("Unable to allocate input device\n");
>> + return -ENOMEM;
>> + }
>> +
>> + inputdev->name = "Ideapad extra buttons";
>> + inputdev->phys = "ideapad/input0";
>> + inputdev->id.bustype = BUS_HOST;
>> + inputdev->dev.parent = &ideapad_priv->platform_device->dev;
>> +
>> + error = sparse_keymap_setup(inputdev, ideapad_keymap, NULL);
>> + if (error) {
>> + pr_err("Unable to setup input device keymap\n");
>> + goto err_free_dev;
>> + }
>> +
>> + error = input_register_device(inputdev);
>> + if (error) {
>> + pr_err("Unable to register input device\n");
>> + goto err_free_keymap;
>> + }
>> +
>> + ideapad_priv->inputdev = inputdev;
>
> Why don't you pass ideapad_priv in as an argument instead of relying on
> global. I know that there can only be one, but then why do you have a
> structure?
That may allow to remove the global later, like we did on
eeepc-laptop/asus-laptop.
>> + return 0;
>> +
>> +err_free_keymap:
>> + sparse_keymap_free(inputdev);
>> +err_free_dev:
>> + input_free_device(inputdev);
>> + return error;
>> +}
>> +
>> +static void ideapad_input_exit(void)
>
> __devexit? The rest of the driver might user these markups as well.
>
>> +{
>> + if (ideapad_priv->inputdev) {
>> + sparse_keymap_free(ideapad_priv->inputdev);
>> + input_unregister_device(ideapad_priv->inputdev);
>> + }
>> + ideapad_priv->inputdev = NULL;
>
> You fail driver initialization when ideapad_input_init() fails so there
> is no point in checking whether ideapad_priv->inputdev is null or not.
>
> Otherwise looks good from input POV.
>
> Thanks.
--
Corentin Chary
http://xf.iksaif.net
next prev parent reply other threads:[~2010-11-18 7:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-17 6:59 [PATCH 0/3] ideapad: hotkey enablement Ike Panhc
2010-11-17 7:00 ` [PATCH 1/3] ideapad: add platform driver for ideapad Ike Panhc
2010-11-17 7:00 ` [PATCH 2/3] ideapad: let camera power control entry under platform driver Ike Panhc
2010-11-17 7:00 ` [PATCH 3/3] ideapad: add hotkey support Ike Panhc
2010-11-17 21:29 ` Dmitry Torokhov
2010-11-18 7:35 ` Corentin Chary [this message]
2010-11-19 7:09 ` Ike Panhc
2010-12-02 23:41 ` Dave Hansen
2010-12-02 23:43 ` Ike Panhc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='AANLkTim1DKZkCqB1mLg5=7UTd2szCoSS_DSO8v3jHTmy@mail.gmail.com' \
--to=corentin.chary@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=dwmw2@infradead.org \
--cc=ike.pan@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg@redhat.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®