mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 1/3] ARM: cns3xxx: Add new and export the old power management functions
       [not found] <1290368618-13689-1-git-send-email-mkl0301@gmail.com>
@ 2010-11-21 19:43 ` mkl0301
  2010-11-21 19:43 ` [PATCH 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller mkl0301
  1 sibling, 0 replies; 2+ messages in thread
From: mkl0301 @ 2010-11-21 19:43 UTC (permalink / raw)
  To: cbouatmailru, avorontsov, linux-kernel, linux-arm-kernel,
	dbrownell, linux-usb
  Cc: Mac Lin

From: Mac Lin <mkl0301@gmail.com>

This patch add cns3xxx_pwr_clk_dis, and export thoes power management functions
that may be used by many other device drivers on CNS3XXX.

Signed-off-by: Mac Lin <mkl0301@gmail.com>
---
 arch/arm/mach-cns3xxx/core.h            |    4 ++--
 arch/arm/mach-cns3xxx/include/mach/pm.h |   19 +++++++++++++++++++
 arch/arm/mach-cns3xxx/pm.c              |   17 +++++++++++++++++
 3 files changed, 38 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-cns3xxx/include/mach/pm.h

diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index 6b33ec1..c6636bd 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -11,13 +11,13 @@
 #ifndef __CNS3XXX_CORE_H
 #define __CNS3XXX_CORE_H
 
+#include <mach/pm.h>
+
 extern void __iomem *gic_cpu_base_addr;
 extern struct sys_timer cns3xxx_timer;
 
 void __init cns3xxx_map_io(void);
 void __init cns3xxx_init_irq(void);
 void cns3xxx_power_off(void);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
 
 #endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/include/mach/pm.h
new file mode 100644
index 0000000..102617b
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/pm.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2004 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_PM_H
+#define __CNS3XXX_PM_H
+
+void cns3xxx_pwr_clk_en(unsigned int block);
+void cns3xxx_pwr_clk_dis(unsigned int block);
+void cns3xxx_pwr_power_up(unsigned int block);
+void cns3xxx_pwr_power_down(unsigned int block);
+
+#endif /* __CNS3XXX_PM_H */
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 38e4470..a4495e6 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -6,6 +6,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <mach/system.h>
@@ -18,6 +20,16 @@ void cns3xxx_pwr_clk_en(unsigned int block)
 	reg |= (block & PM_CLK_GATE_REG_MASK);
 	__raw_writel(reg, PM_CLK_GATE_REG);
 }
+EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
+
+void cns3xxx_pwr_clk_dis(unsigned int block)
+{
+	u32 reg = __raw_readl(PM_CLK_GATE_REG);
+
+	reg &= ~(block & PM_CLK_GATE_REG_MASK);
+	__raw_writel(reg, PM_CLK_GATE_REG);
+}
+EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
 
 void cns3xxx_pwr_power_up(unsigned int block)
 {
@@ -29,6 +41,7 @@ void cns3xxx_pwr_power_up(unsigned int block)
 	/* Wait for 300us for the PLL output clock locked. */
 	udelay(300);
 };
+EXPORT_SYMBOL(cns3xxx_pwr_power_up);
 
 void cns3xxx_pwr_power_down(unsigned int block)
 {
@@ -38,6 +51,7 @@ void cns3xxx_pwr_power_down(unsigned int block)
 	reg |= (block & CNS3XXX_PWR_PLL_ALL);
 	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 };
+EXPORT_SYMBOL(cns3xxx_pwr_power_down);
 
 static void cns3xxx_pwr_soft_rst_force(unsigned int block)
 {
@@ -56,6 +70,7 @@ static void cns3xxx_pwr_soft_rst_force(unsigned int block)
 
 	__raw_writel(reg, PM_SOFT_RST_REG);
 }
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force);
 
 void cns3xxx_pwr_soft_rst(unsigned int block)
 {
@@ -69,6 +84,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block)
 	}
 	cns3xxx_pwr_soft_rst_force(block);
 }
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
 
 void arch_reset(char mode, const char *cmd)
 {
@@ -99,3 +115,4 @@ int cns3xxx_cpu_clock(void)
 
 	return cpu;
 }
+EXPORT_SYMBOL(cns3xxx_cpu_clock);
-- 
1.7.3


^ permalink raw reply	[flat|nested] 2+ messages in thread

* [PATCH 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller
       [not found] <1290368618-13689-1-git-send-email-mkl0301@gmail.com>
  2010-11-21 19:43 ` [PATCH 1/3] ARM: cns3xxx: Add new and export the old power management functions mkl0301
@ 2010-11-21 19:43 ` mkl0301
  1 sibling, 0 replies; 2+ messages in thread
From: mkl0301 @ 2010-11-21 19:43 UTC (permalink / raw)
  To: cbouatmailru, avorontsov, linux-kernel, linux-arm-kernel,
	dbrownell, linux-usb
  Cc: Mac Lin

From: Mac Lin <mkl0301@gmail.com>

This patch add plateform_device for EHCI and OHCI controller on CNS3XXX. Power
reference count (usb_pwr_ref) is used to control enabling and disabling the
single clock control for both EHCI and OHCI controller.

It also remove EHCI/OHCI unused virtual address definitions.

Signed-off-by: Mac Lin <mkl0301@gmail.com>
---
 arch/arm/mach-cns3xxx/cns3420vb.c            |   50 ++++++++++++++++++++++++++
 arch/arm/mach-cns3xxx/include/mach/cns3xxx.h |    2 -
 arch/arm/mach-cns3xxx/include/mach/pm.h      |    2 +
 arch/arm/mach-cns3xxx/pm.c                   |    4 ++
 4 files changed, 56 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 90fe9ab..4824223 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -107,11 +107,61 @@ static void __init cns3420_early_serial_setup(void)
 #endif
 }
 
+static struct resource cns3xxx_usb_ehci_resource[] = {
+	[0] = {
+		.start = CNS3XXX_USB_BASE,
+		.end   = CNS3XXX_USB_BASE + SZ_16M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CNS3XXX_USB_EHCI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static u64 cns3xxx_usb_dma_mask = 0xffffffffULL;
+
+static struct platform_device cns3xxx_usb_ehci_device = {
+	.name		= "cns3xxx-ehci",
+	.num_resources	= ARRAY_SIZE(cns3xxx_usb_ehci_resource),
+	.resource	= cns3xxx_usb_ehci_resource,
+	.dev		= {
+		.dma_mask		= &cns3xxx_usb_dma_mask,
+		.coherent_dma_mask	= 0xffffffffULL,
+	},
+};
+
+static struct resource cns3xxx_usb_ohci_resource[] = {
+	[0] = {
+		.start          = CNS3XXX_USB_OHCI_BASE,
+		.end            = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = IRQ_CNS3XXX_USB_OHCI,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static u64 cns3xxx_usb_ohci_dma_mask = 0xffffffffULL;
+static struct platform_device cns3xxx_usb_ohci_device = {
+	.name = "cns3xxx-ohci",
+	.dev                = {
+		.dma_mask       = &cns3xxx_usb_ohci_dma_mask,
+		.coherent_dma_mask = 0xffffffffULL,
+	},
+	.num_resources = 2,
+	.resource = cns3xxx_usb_ohci_resource,
+};
+
+
 /*
  * Initialization
  */
 static struct platform_device *cns3420_pdevs[] __initdata = {
 	&cns3420_nor_pdev,
+	&cns3xxx_usb_ehci_device,
+	&cns3xxx_usb_ohci_device,
 };
 
 static void __init cns3420_init(void)
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 6dbce13..191c8e5 100644
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -165,7 +165,6 @@
 #define CNS3XXX_USBOTG_BASE_VIRT		0xFFF15000
 
 #define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
-#define CNS3XXX_USB_BASE_VIRT			0xFFF16000
 
 #define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
 #define CNS3XXX_SATA2_SIZE			SZ_16M
@@ -184,7 +183,6 @@
 #define CNS3XXX_2DG_BASE_VIRT			0xFFF1B000
 
 #define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
-#define CNS3XXX_USB_OHCI_BASE_VIRT		0xFFF1C000
 
 #define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
 #define CNS3XXX_L2C_BASE_VIRT			0xFFF27000
diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/include/mach/pm.h
index 102617b..ddbe7d7 100644
--- a/arch/arm/mach-cns3xxx/include/mach/pm.h
+++ b/arch/arm/mach-cns3xxx/include/mach/pm.h
@@ -16,4 +16,6 @@ void cns3xxx_pwr_clk_dis(unsigned int block);
 void cns3xxx_pwr_power_up(unsigned int block);
 void cns3xxx_pwr_power_down(unsigned int block);
 
+extern atomic_t usb_pwr_ref;
+
 #endif /* __CNS3XXX_PM_H */
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index a4495e6..784af93 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <asm/atomic.h>
 #include <mach/system.h>
 #include <mach/cns3xxx.h>
 
@@ -116,3 +117,6 @@ int cns3xxx_cpu_clock(void)
 	return cpu;
 }
 EXPORT_SYMBOL(cns3xxx_cpu_clock);
+
+atomic_t usb_pwr_ref = ATOMIC_INIT(0);
+EXPORT_SYMBOL(usb_pwr_ref);
-- 
1.7.3


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2010-11-21 19:44 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <1290368618-13689-1-git-send-email-mkl0301@gmail.com>
2010-11-21 19:43 ` [PATCH 1/3] ARM: cns3xxx: Add new and export the old power management functions mkl0301
2010-11-21 19:43 ` [PATCH 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller mkl0301

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®