From: Matthew Garrett <mjg@redhat.com>
To: linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, jbarnes@virtuousgeek.org,
Matthew Garrett <mjg@redhat.com>
Subject: [PATCH v2] PCI: Disable ASPM if BIOS asks us to
Date: Mon, 6 Dec 2010 14:00:56 -0500 [thread overview]
Message-ID: <1291662056-6055-1-git-send-email-mjg@redhat.com> (raw)
We currently refuse to touch the ASPM registers if the BIOS tells us that
ASPM isn't supported. This can cause problems if the BIOS has (for any
reason) enabled ASPM on some devices anyway. Change the code such that we
explicitly clear ASPM if the FADT indicates that ASPM isn't supported,
and make sure we tidy up appropriately on device removal in order to deal
with the hotplug case. If ASPM is disabled because the BIOS doesn't hand
over control then we won't touch the registers.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
---
Implement Rafael's suggestion to use two separate functions, and also
ensure that we clear the clkpm bit as well as the ASPM bits.
drivers/pci/pci-acpi.c | 1 +
drivers/pci/pcie/aspm.c | 21 +++++++++++++++++----
include/linux/pci-aspm.h | 5 ++++-
3 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 24e19c5..d7ea699 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -399,6 +399,7 @@ static int __init acpi_pci_init(void)
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
printk(KERN_INFO"ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n");
+ pcie_clear_aspm();
pcie_no_aspm();
}
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 7122281..8112415 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -68,7 +68,7 @@ struct pcie_link_state {
struct aspm_latency acceptable[8];
};
-static int aspm_disabled, aspm_force;
+static int aspm_disabled, aspm_force, aspm_clear_state;
static DEFINE_MUTEX(aspm_lock);
static LIST_HEAD(link_list);
@@ -139,7 +139,7 @@ static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
{
/* Don't enable Clock PM if the link is not Clock PM capable */
if (!link->clkpm_capable && enable)
- return;
+ enable = 0;
/* Need nothing if the specified equals to current state */
if (link->clkpm_enabled == enable)
return;
@@ -498,6 +498,10 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
struct pci_dev *child;
int pos;
u32 reg32;
+
+ if (aspm_clear_state)
+ return -EINVAL;
+
/*
* Some functions in a slot might not all be PCIe functions,
* very strange. Disable ASPM for the whole slot
@@ -563,12 +567,15 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
struct pcie_link_state *link;
int blacklist = !!pcie_aspm_sanity_check(pdev);
- if (aspm_disabled || !pci_is_pcie(pdev) || pdev->link_state)
+ if (!pci_is_pcie(pdev) || pdev->link_state)
return;
if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
return;
+ if (aspm_disabled && !aspm_clear_state)
+ return;
+
/* VIA has a strange chipset, root port is under a bridge */
if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT &&
pdev->bus->self)
@@ -641,7 +648,7 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
struct pci_dev *parent = pdev->bus->self;
struct pcie_link_state *link, *root, *parent_link;
- if (aspm_disabled || !pci_is_pcie(pdev) ||
+ if ((aspm_disabled && !aspm_clear_state) || !pci_is_pcie(pdev) ||
!parent || !parent->link_state)
return;
if ((parent->pcie_type != PCI_EXP_TYPE_ROOT_PORT) &&
@@ -899,6 +906,12 @@ static int __init pcie_aspm_disable(char *str)
__setup("pcie_aspm=", pcie_aspm_disable);
+void pci_clear_aspm(void)
+{
+ if (!aspm_force)
+ aspm_clear_state = 1;
+}
+
void pcie_no_aspm(void)
{
if (!aspm_force)
diff --git a/include/linux/pci-aspm.h b/include/linux/pci-aspm.h
index 91ba0b3..ce68105 100644
--- a/include/linux/pci-aspm.h
+++ b/include/linux/pci-aspm.h
@@ -27,6 +27,7 @@ extern void pcie_aspm_init_link_state(struct pci_dev *pdev);
extern void pcie_aspm_exit_link_state(struct pci_dev *pdev);
extern void pcie_aspm_pm_state_change(struct pci_dev *pdev);
extern void pci_disable_link_state(struct pci_dev *pdev, int state);
+extern void pcie_clear_aspm(void);
extern void pcie_no_aspm(void);
#else
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev)
@@ -41,7 +42,9 @@ static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev)
static inline void pci_disable_link_state(struct pci_dev *pdev, int state)
{
}
-
+static inline void pcie_clear_aspm(void)
+{
+}
static inline void pcie_no_aspm(void)
{
}
--
1.7.3.2
next reply other threads:[~2010-12-06 19:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-06 19:00 Matthew Garrett [this message]
2010-12-06 22:20 ` Rafael J. Wysocki
2010-12-10 21:07 ` Jesse Barnes
2010-12-10 21:18 ` Matthew Garrett
2010-12-10 21:21 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291662056-6055-1-git-send-email-mjg@redhat.com \
--to=mjg@redhat.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®