From: Peter Huewe <peterhuewe@gmx.de>
To: Greg KH <greg@kroah.com>
Cc: Greg KH <gregkh@suse.de>,
devel@linuxdriverproject.org, linux-kernel@vger.kernel.org,
Harry Wei <jiaweiwei.xiyou@gmail.com>,
Peter Huewe <peterhuewe@gmx.de>
Subject: [PATCH 02/27] staging/bcm: Fix common spelling mistakes
Date: Sat, 26 Mar 2011 02:17:51 +0100 [thread overview]
Message-ID: <1301102296-15565-3-git-send-email-peterhuewe@gmx.de> (raw)
In-Reply-To: <20110314224746.GA21100@kroah.com>
This patch fixes some very common spelling mistakes in
drivers/staging/bcm
WRONG -> RIGHT
accomodate -> accommodate
occured -> occurred
reci[e]ve -> receive
Kernel Version: staging/staging-next 20110325 (4bbba111)
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
---
drivers/staging/bcm/Adapter.h | 2 +-
drivers/staging/bcm/CmHost.c | 6 +++---
drivers/staging/bcm/HostMIBSInterface.h | 2 +-
drivers/staging/bcm/IPv6Protocol.c | 4 ++--
drivers/staging/bcm/InterfaceIdleMode.c | 4 ++--
drivers/staging/bcm/InterfaceIsr.c | 2 +-
drivers/staging/bcm/InterfaceRx.c | 10 +++++-----
drivers/staging/bcm/Misc.c | 2 +-
drivers/staging/bcm/PHSModule.c | 2 +-
drivers/staging/bcm/Qos.c | 2 +-
drivers/staging/bcm/cntrl_SignalingInterface.h | 4 ++--
11 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/bcm/Adapter.h b/drivers/staging/bcm/Adapter.h
index 32909e2..c37d795 100644
--- a/drivers/staging/bcm/Adapter.h
+++ b/drivers/staging/bcm/Adapter.h
@@ -412,7 +412,7 @@ struct _MINI_ADAPTER
// this to keep track of the Tx and Rx MailBox Registers.
atomic_t CurrNumFreeTxDesc;
- // to keep track the no of byte recieved
+ // to keep track the no of byte received
USHORT PrevNumRecvDescs;
USHORT CurrNumRecvDescs;
UINT u32TotalDSD;
diff --git a/drivers/staging/bcm/CmHost.c b/drivers/staging/bcm/CmHost.c
index 9be184f..f6e1b08 100644
--- a/drivers/staging/bcm/CmHost.c
+++ b/drivers/staging/bcm/CmHost.c
@@ -1103,7 +1103,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8TrafficIndicationPreference : 0x%X",
pstAddIndication->sfAuthorizedSet.u8TrafficIndicationPreference);
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " Total Classifiers Recieved : 0x%X",pstAddIndication->sfAuthorizedSet.u8TotalClassifiers);
+ BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " Total Classifiers Received : 0x%X",pstAddIndication->sfAuthorizedSet.u8TotalClassifiers);
nCurClassifierCnt = pstAddIndication->sfAuthorizedSet.u8TotalClassifiers;
@@ -1305,7 +1305,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8TrafficIndicationPreference : 0x%02X",
pstAddIndication->sfAdmittedSet.u8TrafficIndicationPreference);
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " Total Classifiers Recieved : 0x%X",pstAddIndication->sfAdmittedSet.u8TotalClassifiers);
+ BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " Total Classifiers Received : 0x%X",pstAddIndication->sfAdmittedSet.u8TotalClassifiers);
nCurClassifierCnt = pstAddIndication->sfAdmittedSet.u8TotalClassifiers;
@@ -1502,7 +1502,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " u8TrafficIndicationPreference : 0x%X",
pstAddIndication->sfActiveSet.u8TrafficIndicationPreference);
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " Total Classifiers Recieved : 0x%X",pstAddIndication->sfActiveSet.u8TotalClassifiers);
+ BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " Total Classifiers Received : 0x%X",pstAddIndication->sfActiveSet.u8TotalClassifiers);
nCurClassifierCnt = pstAddIndication->sfActiveSet.u8TotalClassifiers;
diff --git a/drivers/staging/bcm/HostMIBSInterface.h b/drivers/staging/bcm/HostMIBSInterface.h
index f17a4f1..e34531b 100644
--- a/drivers/staging/bcm/HostMIBSInterface.h
+++ b/drivers/staging/bcm/HostMIBSInterface.h
@@ -62,7 +62,7 @@ typedef struct _S_MIBS_HOST_INFO
ULONG NumDesUsed;
ULONG CurrNumFreeDesc;
ULONG PrevNumFreeDesc;
- // to keep track the no of byte recieved
+ // to keep track the no of byte received
ULONG PrevNumRcevBytes;
ULONG CurrNumRcevBytes;
diff --git a/drivers/staging/bcm/IPv6Protocol.c b/drivers/staging/bcm/IPv6Protocol.c
index 91b6fbe..5b4fd37 100644
--- a/drivers/staging/bcm/IPv6Protocol.c
+++ b/drivers/staging/bcm/IPv6Protocol.c
@@ -287,7 +287,7 @@ static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Head
for(uiLoopIndex=0;uiLoopIndex<uiCountIPSrcAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
{
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Recieved Packet : \n ");
+ BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Received Packet : \n ");
DumpIpv6Address(aulSrcIP);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Mask In Classifier Rule: \n");
DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex]);
@@ -340,7 +340,7 @@ static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Hea
for(uiLoopIndex=0;uiLoopIndex<uiCountIPDestinationAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
{
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Recieved Packet : \n ");
+ BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Received Packet : \n ");
DumpIpv6Address(aulDestIP);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Mask In Classifier Rule: \n");
DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex]);
diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c
index bf5c0ad..96fa4ea 100644
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -11,7 +11,7 @@ Input parameters: IN PMINI_ADAPTER Adapter - Miniport Adapter Context
Return: BCM_STATUS_SUCCESS - If Wakeup of the HW Interface was successful.
- Other - If an error occured.
+ Other - If an error occurred.
*/
@@ -26,7 +26,7 @@ Input parameters: IN PMINI_ADAPTER Adapter - Miniport Adapter Context
Return: BCM_STATUS_SUCCESS - If Idle mode response related HW configuration was successful.
- Other - If an error occured.
+ Other - If an error occurred.
*/
/*
diff --git a/drivers/staging/bcm/InterfaceIsr.c b/drivers/staging/bcm/InterfaceIsr.c
index 220ff92..6dd5d9e 100644
--- a/drivers/staging/bcm/InterfaceIsr.c
+++ b/drivers/staging/bcm/InterfaceIsr.c
@@ -81,7 +81,7 @@ static void read_int_callback(struct urb *urb/*, struct pt_regs *regs*/)
case -EINPROGRESS:
{
//This situation may happend when URBunlink is used. for detail check usb_unlink_urb documentation.
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occured... something very bad is going on");
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on");
break ;
//return;
}
diff --git a/drivers/staging/bcm/InterfaceRx.c b/drivers/staging/bcm/InterfaceRx.c
index 533f8eb..4a42cb4 100644
--- a/drivers/staging/bcm/InterfaceRx.c
+++ b/drivers/staging/bcm/InterfaceRx.c
@@ -123,7 +123,7 @@ static void read_bulk_callback(struct urb *urb)
if((ntohs(pLeader->Vcid) == VCID_CONTROL_PACKET) ||
(!(pLeader->Status >= 0x20 && pLeader->Status <= 0x3F)))
{
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_CTRL, DBG_LVL_ALL, "Recived control pkt...");
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_CTRL, DBG_LVL_ALL, "Received control pkt...");
*(PUSHORT)skb->data = pLeader->Status;
memcpy(skb->data+sizeof(USHORT), urb->transfer_buffer +
(sizeof(LEADER)), pLeader->PLength);
@@ -142,7 +142,7 @@ static void read_bulk_callback(struct urb *urb)
* Data Packet, Format a proper Ethernet Header
* and give it to the stack
*/
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Recived Data pkt...");
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Received Data pkt...");
skb_reserve(skb, 2 + SKB_RESERVE_PHS_BYTES);
memcpy(skb->data+ETH_HLEN, (PUCHAR)urb->transfer_buffer + sizeof(LEADER), pLeader->PLength);
skb->dev = Adapter->dev;
@@ -151,7 +151,7 @@ static void read_bulk_callback(struct urb *urb)
skb_put (skb, pLeader->PLength + ETH_HLEN);
Adapter->PackInfo[QueueIndex].uiTotalRxBytes+=pLeader->PLength;
Adapter->PackInfo[QueueIndex].uiThisPeriodRxBytes+= pLeader->PLength;
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Recived Data pkt of len :0x%X", pLeader->PLength);
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Received Data pkt of len :0x%X", pLeader->PLength);
if(netif_running(Adapter->dev))
{
@@ -229,7 +229,7 @@ static int ReceiveRcb(PS_INTERFACE_ADAPTER psIntfAdapter, PUSB_RCB pRcb)
/*
Function: InterfaceRx
-Description: This is the hardware specific Function for Recieveing
+Description: This is the hardware specific Function for Receiveing
data packet/control packets from the device.
Input parameters: IN PMINI_ADAPTER Adapter - Miniport Adapter Context
@@ -237,7 +237,7 @@ Input parameters: IN PMINI_ADAPTER Adapter - Miniport Adapter Context
Return: TRUE - If Rx was successful.
- Other - If an error occured.
+ Other - If an error occurred.
*/
BOOLEAN InterfaceRx (PS_INTERFACE_ADAPTER psIntfAdapter)
diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c
index d624f35..4d2ed16 100644
--- a/drivers/staging/bcm/Misc.c
+++ b/drivers/staging/bcm/Misc.c
@@ -602,7 +602,7 @@ VOID LinkControlResponseMessage(PMINI_ADAPTER Adapter,PUCHAR pucBuffer)
Adapter->LinkStatus=LINKUP_DONE;
Adapter->bPHSEnabled = *(pucBuffer+3);
Adapter->bETHCSEnabled = *(pucBuffer+4) & ETH_CS_MASK;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "PHS Support Status Recieved In LinkUp Ack : %x \n",Adapter->bPHSEnabled);
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "PHS Support Status Received In LinkUp Ack : %x \n",Adapter->bPHSEnabled);
if((FALSE == Adapter->bShutStatus)&&
(FALSE == Adapter->IdleMode))
{
diff --git a/drivers/staging/bcm/PHSModule.c b/drivers/staging/bcm/PHSModule.c
index d1ca191..c028175 100644
--- a/drivers/staging/bcm/PHSModule.c
+++ b/drivers/staging/bcm/PHSModule.c
@@ -66,7 +66,7 @@ Input parameters: IN PMINI_ADAPTER Adapter - Miniport Adapter Context
BOOLEAN bHeaderSuppressionEnabled - indicates if header suprression is enabled for SF.
Return: STATUS_SUCCESS - If the send was successful.
- Other - If an error occured.
+ Other - If an error occurred.
*/
int PHSTransmit(PMINI_ADAPTER Adapter,
diff --git a/drivers/staging/bcm/Qos.c b/drivers/staging/bcm/Qos.c
index feade94..c97020f 100644
--- a/drivers/staging/bcm/Qos.c
+++ b/drivers/staging/bcm/Qos.c
@@ -727,7 +727,7 @@ static BOOLEAN EthCSMatchVLANRules(S_CLASSIFIER_RULE *pstClassifierRule,struct s
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "%s CLS UserPrio:%x CLS VLANID:%x\n",__FUNCTION__,ntohs(*((USHORT *)pstClassifierRule->usUserPriority)),pstClassifierRule->usVLANID);
- /* In case FW didn't recieve the TLV, the priority field should be ignored */
+ /* In case FW didn't receive the TLV, the priority field should be ignored */
if(pstClassifierRule->usValidityBitMap & (1<<PKT_CLASSIFICATION_USER_PRIORITY_VALID))
{
if(pstEthCsPktInfo->eNwpktEthFrameType!=eEth802QVLANFrame)
diff --git a/drivers/staging/bcm/cntrl_SignalingInterface.h b/drivers/staging/bcm/cntrl_SignalingInterface.h
index 8907784..67bb2f5 100644
--- a/drivers/staging/bcm/cntrl_SignalingInterface.h
+++ b/drivers/staging/bcm/cntrl_SignalingInterface.h
@@ -21,8 +21,8 @@
#define VENDOR_PHS_PARAM_LENGTH 10
#define MAX_NUM_ACTIVE_BS 10
#define AUTH_TOKEN_LENGTH 10
-#define NUM_HARQ_CHANNELS 16 //Changed from 10 to 16 to accomodate all HARQ channels
-#define VENDOR_CLASSIFIER_PARAM_LENGTH 1 //Changed the size to 1 byte since we dnt use it
+#define NUM_HARQ_CHANNELS 16 //Changed from 10 to 16 to accommodate all HARQ channels
+#define VENDOR_CLASSIFIER_PARAM_LENGTH 1 //Changed the size to 1 byte since we dont use it
#define VENDOR_SPECIF_QOS_PARAM 1
#define VENDOR_PHS_PARAM_LENGTH 10
#define MBS_CONTENTS_ID_LENGTH 10
--
1.7.3.4
next prev parent reply other threads:[~2011-03-26 1:19 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-06 13:18 [PATCH] trivial: fix " Peter Huewe
2011-01-06 14:01 ` Jesper Juhl
2011-01-06 14:14 ` Peter Hüwe
2011-01-07 10:04 ` Jiri Kosina
2011-01-07 13:38 ` Peter Hüwe
2011-03-08 22:49 ` [PATCH v2/resend] " Peter Huewe
2011-03-14 12:00 ` Jiri Kosina
2011-03-14 20:35 ` [PATCH v3] " Peter Huewe
2011-03-14 21:57 ` [PATCH] staging/trivial: Fix " Peter Huewe
2011-03-14 22:03 ` Greg KH
2011-03-14 22:43 ` Peter Hüwe
2011-03-14 22:47 ` Greg KH
2011-03-26 1:17 ` [PATCH 0/27] " Peter Huewe
2011-03-26 1:17 ` [PATCH 01/27] staging/ath6kl: " Peter Huewe
2011-03-26 1:17 ` Peter Huewe [this message]
2011-03-26 1:17 ` [PATCH 03/27] staging/brcm80211: " Peter Huewe
2011-03-26 1:17 ` [PATCH 04/27] staging/comedi: " Peter Huewe
2011-03-26 1:17 ` [PATCH 05/27] staging/crystalhd: " Peter Huewe
2011-03-26 1:17 ` [PATCH 06/27] staging/dt3155v4l: " Peter Huewe
2011-03-26 1:17 ` [PATCH 07/27] staging/easycap: " Peter Huewe
2011-03-15 3:14 ` [PATCH] staging/trivial: " Harry Wei
2011-03-26 1:39 ` Peter Hüwe
2011-03-26 2:21 ` Harry Wei
2011-03-15 2:58 ` [PATCH v2/resend] trivial: fix " Harry Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301102296-15565-3-git-send-email-peterhuewe@gmx.de \
--to=peterhuewe@gmx.de \
--cc=devel@linuxdriverproject.org \
--cc=greg@kroah.com \
--cc=gregkh@suse.de \
--cc=jiaweiwei.xiyou@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®