From: Peter Huewe <peterhuewe@gmx.de>
To: Greg KH <greg@kroah.com>
Cc: Greg KH <gregkh@suse.de>,
devel@linuxdriverproject.org, linux-kernel@vger.kernel.org,
Harry Wei <jiaweiwei.xiyou@gmail.com>,
Peter Huewe <peterhuewe@gmx.de>
Subject: [PATCH 04/27] staging/comedi: Fix common spelling mistakes
Date: Sat, 26 Mar 2011 02:17:53 +0100 [thread overview]
Message-ID: <1301102296-15565-5-git-send-email-peterhuewe@gmx.de> (raw)
In-Reply-To: <20110314224746.GA21100@kroah.com>
This patch fixes some very common spelling mistakes in
drivers/staging/comedi.
WRONG -> RIGHT
interupt -> interrupt
occured -> occurred
recieve -> receive
writting -> writing
Kernel Version: staging/staging-next 20110325 (4bbba111)
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
---
drivers/staging/comedi/comedi_fops.c | 2 +-
.../comedi/drivers/addi-data/hwdrv_apci2032.c | 8 ++++----
drivers/staging/comedi/drivers/adv_pci1710.c | 2 +-
drivers/staging/comedi/drivers/cb_pcidas.c | 2 +-
drivers/staging/comedi/drivers/comedi_test.c | 2 +-
drivers/staging/comedi/drivers/me4000.c | 4 ++--
drivers/staging/comedi/drivers/ni_at_a2150.c | 4 ++--
drivers/staging/comedi/drivers/ni_labpc.c | 6 +++---
drivers/staging/comedi/drivers/s626.c | 12 ++++++------
drivers/staging/comedi/drivers/unioxx5.c | 4 ++--
10 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index a4ceb29..e7e72b8 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -2064,7 +2064,7 @@ void comedi_event(struct comedi_device *dev, struct comedi_subdevice *s)
COMEDI_CB_OVERFLOW)) {
runflags_mask |= SRF_RUNNING;
}
- /* remember if an error event has occured, so an error
+ /* remember if an error event has occurred, so an error
* can be returned the next time the user does a read() */
if (s->async->events & (COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW)) {
runflags_mask |= SRF_ERROR;
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
index 9dd857d..f5b8521 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
@@ -488,9 +488,9 @@ int i_APCI2032_ReadWatchdog(struct comedi_device *dev, struct comedi_subdevice *
+----------------------------------------------------------------------------+
| Output Parameters : -- |
+----------------------------------------------------------------------------+
-| Return Value : TRUE : No error occur |
-| : FALSE : Error occur. Return the error |
-| |
+| Return Value : TRUE : No error occurred |
+| : FALSE : Error occurred. Return the error |
+| |
+----------------------------------------------------------------------------+
*/
void v_APCI2032_Interrupt(int irq, void *d)
@@ -498,7 +498,7 @@ void v_APCI2032_Interrupt(int irq, void *d)
struct comedi_device *dev = d;
unsigned int ui_DO;
- ui_DO = inl(devpriv->iobase + APCI2032_DIGITAL_OP_IRQ) & 0x1; /* Check if VCC OR CC interrupt has occured. */
+ ui_DO = inl(devpriv->iobase + APCI2032_DIGITAL_OP_IRQ) & 0x1; /* Check if VCC OR CC interrupt has occurred. */
if (ui_DO == 0) {
printk("\nInterrupt from unKnown source\n");
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 466e69f..0fd0ac5 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -98,7 +98,7 @@ Configuration options:
#define Status_FE 0x0100 /* 1=FIFO is empty */
#define Status_FH 0x0200 /* 1=FIFO is half full */
#define Status_FF 0x0400 /* 1=FIFO is full, fatal error */
-#define Status_IRQ 0x0800 /* 1=IRQ occured */
+#define Status_IRQ 0x0800 /* 1=IRQ occurred */
/* bits from control register (PCI171x_CONTROL) */
#define Control_CNT0 0x0040 /* 1=CNT0 have external source,
* 0=have internal 100kHz source */
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 0941643..f1824eb 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -440,7 +440,7 @@ struct cb_pcidas_private {
unsigned int divisor1;
unsigned int divisor2;
volatile unsigned int count; /* number of analog input samples remaining */
- volatile unsigned int adc_fifo_bits; /* bits to write to interupt/adcfifo register */
+ volatile unsigned int adc_fifo_bits; /* bits to write to interrupt/adcfifo register */
volatile unsigned int s5933_intcsr_bits; /* bits to write to amcc s5933 interrupt control/status register */
volatile unsigned int ao_control_bits; /* bits to write to ao control and status register */
short ai_buffer[AI_BUFFER_SIZE];
diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c
index b220b30..a804742 100644
--- a/drivers/staging/comedi/drivers/comedi_test.c
+++ b/drivers/staging/comedi/drivers/comedi_test.c
@@ -81,7 +81,7 @@ static const struct waveform_board waveform_boards[] = {
/* Data unique to this driver */
struct waveform_private {
struct timer_list timer;
- struct timeval last; /* time at which last timer interrupt occured */
+ struct timeval last; /* time at which last timer interrupt occurred */
unsigned int uvolt_amplitude; /* waveform amplitude in microvolts */
unsigned long usec_period; /* waveform period in microseconds */
unsigned long usec_current; /* current time (modulo waveform period) */
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 75511ba..b692fea 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -1810,7 +1810,7 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
ai_context->irq_status_reg) &
ME4000_IRQ_STATUS_BIT_AI_HF) {
ISR_PDEBUG
- ("me4000_ai_isr(): Fifo half full interrupt occured\n");
+ ("me4000_ai_isr(): Fifo half full interrupt occurred\n");
/* Read status register to find out what happened */
tmp = me4000_inl(dev, ai_context->ctrl_reg);
@@ -1903,7 +1903,7 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
if (me4000_inl(dev,
ai_context->irq_status_reg) & ME4000_IRQ_STATUS_BIT_SC) {
ISR_PDEBUG
- ("me4000_ai_isr(): Sample counter interrupt occured\n");
+ ("me4000_ai_isr(): Sample counter interrupt occurred\n");
s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOA;
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 4d0053e..5928a72 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -106,8 +106,8 @@ TRIG_WAKE_EOS
#define OVFL_BIT 0x8 /* fifo overflow */
#define EDAQ_BIT 0x10 /* end of aquisition interrupt */
#define DCAL_BIT 0x20 /* offset calibration in progress */
-#define INTR_BIT 0x40 /* interrupt has occured */
-#define DMA_TC_BIT 0x80 /* dma terminal count interrupt has occured */
+#define INTR_BIT 0x40 /* interrupt has occurred */
+#define DMA_TC_BIT 0x80 /* dma terminal count interrupt has occurred */
#define ID_BITS(x) (((x) >> 8) & 0x3)
#define IRQ_DMA_CNTRL_REG 0x12 /* write only */
#define DMA_CHAN_BITS(x) ((x) & 0x7) /* sets dma channel */
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 241fe52..f27e6b8 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -183,11 +183,11 @@ NI manuals:
#define OVERRUN_BIT 0x2
/* fifo overflow */
#define OVERFLOW_BIT 0x4
-/* timer interrupt has occured */
+/* timer interrupt has occurred */
#define TIMER_BIT 0x8
-/* dma terminal count has occured */
+/* dma terminal count has occurred */
#define DMATC_BIT 0x10
-/* external trigger has occured */
+/* external trigger has occurred */
#define EXT_TRIG_BIT 0x40
/* 1200 boards only */
#define STATUS2_REG 0x1d
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index d5ba3ab..0f9aa01 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -1048,7 +1048,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
uint8_t group;
uint16_t irqbit;
- DEBUG("s626_irq_handler: interrupt request recieved!!!\n");
+ DEBUG("s626_irq_handler: interrupt request received!!!\n");
if (dev->attached == 0)
return IRQ_NONE;
@@ -1165,7 +1165,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
(16 * group)))
== 1 && cmd->start_src == TRIG_EXT) {
DEBUG
- ("s626_irq_handler: Edge capture interrupt recieved from channel %d\n",
+ ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
cmd->start_arg);
/* Start executing the RPS program. */
@@ -1194,7 +1194,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
&& cmd->scan_begin_src ==
TRIG_EXT) {
DEBUG
- ("s626_irq_handler: Edge capture interrupt recieved from channel %d\n",
+ ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
cmd->scan_begin_arg);
/* Trigger ADC scan loop start by setting RPS Signal 0. */
@@ -1236,7 +1236,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
== 1
&& cmd->convert_src == TRIG_EXT) {
DEBUG
- ("s626_irq_handler: Edge capture interrupt recieved from channel %d\n",
+ ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
cmd->convert_arg);
/* Trigger ADC scan loop start by setting RPS Signal 0. */
@@ -1805,7 +1805,7 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
DEBUG("s626_ai_cmd: NULL command\n");
return -EINVAL;
} else {
- DEBUG("s626_ai_cmd: command recieved!!!\n");
+ DEBUG("s626_ai_cmd: command received!!!\n");
}
if (dev->irq == 0) {
@@ -2570,7 +2570,7 @@ static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)
while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY)
;
- /* Return non-zero if I2C error occured. */
+ /* Return non-zero if I2C error occurred. */
return RR7146(P_I2CCTRL) & I2C_ERR;
}
diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index 598884e..a69e450 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -314,7 +314,7 @@ static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
outb(i + 1, subdev_iobase + 5); /* sends channel number to card */
outb('H', subdev_iobase + 6); /* requests EEPROM world */
while (!(inb(subdev_iobase + 0) & TxBE))
- ; /* waits while writting will be allowed */
+ ; /* waits while writing will be allowed */
outb(0, subdev_iobase + 6);
/* waits while reading of two bytes will be allowed */
@@ -450,7 +450,7 @@ static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp,
/* sending for bytes to module(one byte per cycle iteration) */
for (i = 0; i < 4; i++) {
while (!((inb(usp->usp_iobase + 0)) & TxBE))
- ; /* waits while writting will be allowed */
+ ; /* waits while writing will be allowed */
outb(usp->usp_extra_data[module][i], usp->usp_iobase + 6);
}
--
1.7.3.4
next prev parent reply other threads:[~2011-03-26 1:18 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-06 13:18 [PATCH] trivial: fix " Peter Huewe
2011-01-06 14:01 ` Jesper Juhl
2011-01-06 14:14 ` Peter Hüwe
2011-01-07 10:04 ` Jiri Kosina
2011-01-07 13:38 ` Peter Hüwe
2011-03-08 22:49 ` [PATCH v2/resend] " Peter Huewe
2011-03-14 12:00 ` Jiri Kosina
2011-03-14 20:35 ` [PATCH v3] " Peter Huewe
2011-03-14 21:57 ` [PATCH] staging/trivial: Fix " Peter Huewe
2011-03-14 22:03 ` Greg KH
2011-03-14 22:43 ` Peter Hüwe
2011-03-14 22:47 ` Greg KH
2011-03-26 1:17 ` [PATCH 0/27] " Peter Huewe
2011-03-26 1:17 ` [PATCH 01/27] staging/ath6kl: " Peter Huewe
2011-03-26 1:17 ` [PATCH 02/27] staging/bcm: " Peter Huewe
2011-03-26 1:17 ` [PATCH 03/27] staging/brcm80211: " Peter Huewe
2011-03-26 1:17 ` Peter Huewe [this message]
2011-03-26 1:17 ` [PATCH 05/27] staging/crystalhd: " Peter Huewe
2011-03-26 1:17 ` [PATCH 06/27] staging/dt3155v4l: " Peter Huewe
2011-03-26 1:17 ` [PATCH 07/27] staging/easycap: " Peter Huewe
2011-03-15 3:14 ` [PATCH] staging/trivial: " Harry Wei
2011-03-26 1:39 ` Peter Hüwe
2011-03-26 2:21 ` Harry Wei
2011-03-15 2:58 ` [PATCH v2/resend] trivial: fix " Harry Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1301102296-15565-5-git-send-email-peterhuewe@gmx.de \
--to=peterhuewe@gmx.de \
--cc=devel@linuxdriverproject.org \
--cc=greg@kroah.com \
--cc=gregkh@suse.de \
--cc=jiaweiwei.xiyou@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®