* [PATCH] pch_phub: Fix register miss-setting issue
@ 2011-06-17 1:13 Tomoya MORINAGA
0 siblings, 0 replies; only message in thread
From: Tomoya MORINAGA @ 2011-06-17 1:13 UTC (permalink / raw)
To: Greg Kroah-Hartman, Andrew Morton, Denis Turischev, Axel Lin,
linux-kernel
Cc: qi.wang, yong.y.wang, joel.clark, kok.howg.ewe, toshiharu-linux,
Tomoya MORINAGA
Register "interrupt delay value" is for GbE which is connected to Bus-m of PCIe.
However currently, the value is set for Bus-n.
As a result, the value is not set correctly.
This patch moves setting the value processing of Bus-n to Bus-m.
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
---
drivers/misc/pch_phub.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 4d2b7ed..7bc6f35 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -731,6 +731,8 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
* Device8(GbE)
*/
iowrite32(0x000a0000, chip->pch_phub_base_address + 0x14);
+ /* set the interrupt delay value */
+ iowrite32(0x25, chip->pch_phub_base_address + 0x140);
chip->pch_opt_rom_start_address =\
PCH_PHUB_ROM_START_ADDR_ML7223;
chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
@@ -748,8 +750,6 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
* Device6(SATA 2):f
*/
iowrite32(0x0000ffa0, chip->pch_phub_base_address + 0x14);
- /* set the interrupt delay value */
- iowrite32(0x25, chip->pch_phub_base_address + 0x140);
chip->pch_opt_rom_start_address =\
PCH_PHUB_ROM_START_ADDR_ML7223;
chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
--
1.7.4
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-06-17 1:13 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-06-17 1:13 [PATCH] pch_phub: Fix register miss-setting issue Tomoya MORINAGA
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®