From: John Stultz <john.stultz@linaro.org>
To: Linux Kernel list <linux-kernel@vger.kernel.org>
Cc: John Stultz <john.stultz@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>, Meelis Roos <mroos@ut.ee>
Subject: [RFC][PATCH] alarmtimers: Handle late rtc module loading
Date: Thu, 16 Jun 2011 18:34:39 -0700 [thread overview]
Message-ID: <1308274479-25259-1-git-send-email-john.stultz@linaro.org> (raw)
Meelis: Could you give this patch a shot to make sure it resolves
the issues you've seen on x86 and sparc?
thanks
-john
The alarmtimers code currently picks a rtc device to use at
late init time. However, if your rtc driver is loaded as a module,
it may be registered after the alarmtimers late init code, leaving
the alarmtimers nonfunctional.
This patch moves the the rtcdevice selection to when we actually try
to use it, allowing us to make use of rtc modules that may have been
loaded at any point since bootup.
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Meelis Roos <mroos@ut.ee>
Reported-by: Meelis Roos <mroos@ut.ee>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
kernel/time/alarmtimer.c | 137 ++++++++++++++++++++++-----------------------
1 files changed, 67 insertions(+), 70 deletions(-)
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 2d96624..800f0c6 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -42,15 +42,72 @@ static struct alarm_base {
clockid_t base_clockid;
} alarm_bases[ALARM_NUMTYPE];
+/* freezer delta & lock used to handle clock_nanosleep triggered wakeups */
+static ktime_t freezer_delta;
+static DEFINE_SPINLOCK(freezer_delta_lock);
+
#ifdef CONFIG_RTC_CLASS
/* rtc timer and device for setting alarm wakeups at suspend */
static struct rtc_timer rtctimer;
static struct rtc_device *rtcdev;
-#endif
+static DEFINE_SPINLOCK(rtcdev_lock);
-/* freezer delta & lock used to handle clock_nanosleep triggered wakeups */
-static ktime_t freezer_delta;
-static DEFINE_SPINLOCK(freezer_delta_lock);
+/**
+ * has_wakealarm - check rtc device has wakealarm ability
+ * @dev: current device
+ * @name_ptr: name to be returned
+ *
+ * This helper function checks to see if the rtc device can wake
+ * from suspend.
+ */
+static int has_wakealarm(struct device *dev, void *name_ptr)
+{
+ struct rtc_device *candidate = to_rtc_device(dev);
+
+ if (!candidate->ops->set_alarm)
+ return 0;
+ if (!device_may_wakeup(candidate->dev.parent))
+ return 0;
+
+ *(const char **)name_ptr = dev_name(dev);
+ return 1;
+}
+
+/**
+ * alarmtimer_init_late - Late initializing of alarmtimer code
+ *
+ * This function locates a rtc device to use for wakealarms.
+ * Run as late_initcall to make sure rtc devices have been
+ * registered.
+ */
+static struct rtc_device *alarmtimer_get_rtcdev(void)
+{
+ struct device *dev;
+ char *str;
+ unsigned long flags;
+ struct rtc_device *ret;
+
+ spin_lock_irqsave(&rtcdev_lock, flags);
+ if (!rtcdev) {
+ /* Find an rtc device and init the rtc_timer */
+ dev = class_find_device(rtc_class, NULL, &str, has_wakealarm);
+ /* If we have a device then str is valid. See has_wakealarm() */
+ if (dev) {
+ rtcdev = rtc_class_open(str);
+ /*
+ * Drop the reference we got in class_find_device,
+ * rtc_open takes its own.
+ */
+ put_device(dev);
+ rtc_timer_init(&rtctimer, NULL, NULL);
+ }
+ }
+ ret = rtcdev;
+ spin_unlock_irqrestore(&rtcdev_lock, flags);
+
+ return ret;
+}
+#endif
/**
@@ -166,6 +223,7 @@ static int alarmtimer_suspend(struct device *dev)
struct rtc_time tm;
ktime_t min, now;
unsigned long flags;
+ struct rtc_device *rtc;
int i;
spin_lock_irqsave(&freezer_delta_lock, flags);
@@ -173,8 +231,9 @@ static int alarmtimer_suspend(struct device *dev)
freezer_delta = ktime_set(0, 0);
spin_unlock_irqrestore(&freezer_delta_lock, flags);
+ rtc = alarmtimer_get_rtcdev();
/* If we have no rtcdev, just return */
- if (!rtcdev)
+ if (!rtc)
return 0;
/* Find the soonest timer to expire*/
@@ -199,12 +258,12 @@ static int alarmtimer_suspend(struct device *dev)
WARN_ON(min.tv64 < NSEC_PER_SEC);
/* Setup an rtc timer to fire that far in the future */
- rtc_timer_cancel(rtcdev, &rtctimer);
- rtc_read_time(rtcdev, &tm);
+ rtc_timer_cancel(rtc, &rtctimer);
+ rtc_read_time(rtc, &tm);
now = rtc_tm_to_ktime(tm);
now = ktime_add(now, min);
- rtc_timer_start(rtcdev, &rtctimer, now, ktime_set(0, 0));
+ rtc_timer_start(rtc, &rtctimer, now, ktime_set(0, 0));
return 0;
}
@@ -638,65 +697,3 @@ static int __init alarmtimer_init(void)
}
device_initcall(alarmtimer_init);
-#ifdef CONFIG_RTC_CLASS
-/**
- * has_wakealarm - check rtc device has wakealarm ability
- * @dev: current device
- * @name_ptr: name to be returned
- *
- * This helper function checks to see if the rtc device can wake
- * from suspend.
- */
-static int __init has_wakealarm(struct device *dev, void *name_ptr)
-{
- struct rtc_device *candidate = to_rtc_device(dev);
-
- if (!candidate->ops->set_alarm)
- return 0;
- if (!device_may_wakeup(candidate->dev.parent))
- return 0;
-
- *(const char **)name_ptr = dev_name(dev);
- return 1;
-}
-
-/**
- * alarmtimer_init_late - Late initializing of alarmtimer code
- *
- * This function locates a rtc device to use for wakealarms.
- * Run as late_initcall to make sure rtc devices have been
- * registered.
- */
-static int __init alarmtimer_init_late(void)
-{
- struct device *dev;
- char *str;
-
- /* Find an rtc device and init the rtc_timer */
- dev = class_find_device(rtc_class, NULL, &str, has_wakealarm);
- /* If we have a device then str is valid. See has_wakealarm() */
- if (dev) {
- rtcdev = rtc_class_open(str);
- /*
- * Drop the reference we got in class_find_device,
- * rtc_open takes its own.
- */
- put_device(dev);
- }
- if (!rtcdev) {
- printk(KERN_WARNING "No RTC device found, ALARM timers will"
- " not wake from suspend");
- }
- rtc_timer_init(&rtctimer, NULL, NULL);
-
- return 0;
-}
-#else
-static int __init alarmtimer_init_late(void)
-{
- printk(KERN_WARNING "Kernel not built with RTC support, ALARM timers"
- " will not wake from suspend");
- return 0;
-}
-#endif
-late_initcall(alarmtimer_init_late);
--
1.7.3.2.146.gca209
next reply other threads:[~2011-06-17 1:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-17 1:34 John Stultz [this message]
2011-06-17 9:43 ` Meelis Roos
2011-06-17 18:33 ` John Stultz
2011-06-18 0:13 ` john stultz
2011-06-20 20:09 ` Meelis Roos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308274479-25259-1-git-send-email-john.stultz@linaro.org \
--to=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mroos@ut.ee \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®