From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Liam Girdwood <lrg@ti.com>, Tony Lindgren <tony@atomide.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
Peter Ujfalusi <peter.ujfalusi@ti.com>
Subject: [PATCH v6 00/18] MFD/ASoC/Input: TWL4030/TWL60X0 changes
Date: Tue, 21 Jun 2011 16:38:58 +0300 [thread overview]
Message-ID: <1308663556-29120-1-git-send-email-peter.ujfalusi@ti.com> (raw)
Hello,
Changes since v5:
- Use alloc_workqueue in the twl6040-vibra driver (comment from Tejun Heo)
- Allow user to change the headset power mode, but if the change is not allowed
by the use case the change is not written to the HW (comment from Mark Brown)
Mark: I have added your acks for the patches, except for patch 15, where you
requested a change.
Intro message from the v5 series:
The series will do five major things, and they are in one series, because they
pretty much depending on each other, so it is easier to handle them together.
1. Move the common pmic related configurations out from the board files.
New twl-common.c/h file has been created for this purpose.
OMAP3 board files received two patches (pdata, and regualtor changes), OMAP4
board files has been changed with one patch.
2. Rename the twl4030-codec MFD driver to twl4030-audio
Since the ASoC multicomponent introduction (2.6.37) the twl4030-codec MFD dirver
had been using twl4030-audio to register (twl4030-codec is the ASoC codec
driver). The documentation refers to this part of twl as audio block, so it is
better to rename the driver as well to avoid confusion.
3. Introduction of MFD driver for twl6040.
The TWL6040 audio IC has codec and vibra functionality.
Convert the existing ASoC codec driver to use the new MFD driver's interface.
4. Vibrator driver for TWL6040 (Input/ForceFeedback driver)
The driver itself, and support for the vibrators in SDP4430 board.
5. Updates for twl6040 ASoC codec driver
HS ramp configuration, new ABE dais, updated sample rate constraints, SDP4430
configuration.
Regards,
Peter
---
Axel Castaneda Gonzalez (1):
ASoC: twl6040: Configure ramp step based on platform
Liam Girdwood (3):
ASoC: twl6040: add all ABE DAIs
ASoC: twl6040: Support other sample rates in constraints.
ASoC: twl6040: set default constraints.
Misael Lopez Cruz (5):
mfd: twl6040: Add initial support
ASoC: twl6040: Convert into TWL6040 MFD child
input: Add initial support for TWL6040 vibrator
ASoC: twl6040: Remove pll and headset mode dependency
OMAP4: SDP4430: Add twl6040 codec platform support
Peter Ujfalusi (9):
OMAP: New twl-common for common TWL configuration
OMAP4: Move common twl6030 configuration to twl-common
OMAP3: Move common twl configuration to twl-common
OMAP3: Move common regulator configuration to twl-common
MFD: twl4030-codec: Rename internals from codec to audio
MFD: twl4030-codec -> twl4030-audio: Rename the driver
MFD: twl4030-audio: Rename platform data
MFD: twl6040: Change platform data for soc codec driver
OMAP4: SDP4430: Add twl6040 vibrator platform support
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/board-3430sdp.c | 89 +---
arch/arm/mach-omap2/board-4430sdp.c | 187 ++----
arch/arm/mach-omap2/board-cm-t35.c | 48 +--
arch/arm/mach-omap2/board-devkit8000.c | 37 +--
arch/arm/mach-omap2/board-igep0020.c | 44 +--
arch/arm/mach-omap2/board-ldp.c | 15 +-
arch/arm/mach-omap2/board-omap3beagle.c | 60 +--
arch/arm/mach-omap2/board-omap3evm.c | 67 +--
arch/arm/mach-omap2/board-omap3pandora.c | 59 +--
arch/arm/mach-omap2/board-omap3stalker.c | 70 +--
arch/arm/mach-omap2/board-omap3touchbook.c | 57 +--
arch/arm/mach-omap2/board-omap4panda.c | 149 +-----
arch/arm/mach-omap2/board-overo.c | 59 +--
arch/arm/mach-omap2/board-rm680.c | 8 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 44 +--
arch/arm/mach-omap2/board-zoom-peripherals.c | 88 +---
arch/arm/mach-omap2/common-board-devices.c | 21 -
arch/arm/mach-omap2/common-board-devices.h | 26 +-
arch/arm/mach-omap2/twl-common.c | 304 ++++++++++
arch/arm/mach-omap2/twl-common.h | 59 ++
arch/arm/plat-omap/include/plat/irqs.h | 12 +-
drivers/input/misc/Kconfig | 13 +-
drivers/input/misc/Makefile | 1 +
drivers/input/misc/twl4030-vibra.c | 12 +-
drivers/input/misc/twl6040-vibra.c | 416 +++++++++++++
drivers/mfd/Kconfig | 8 +-
drivers/mfd/Makefile | 3 +-
drivers/mfd/twl-core.c | 13 +-
drivers/mfd/twl4030-audio.c | 277 +++++++++
drivers/mfd/twl4030-codec.c | 277 ---------
drivers/mfd/twl6040-core.c | 601 +++++++++++++++++++
drivers/mfd/twl6040-irq.c | 205 +++++++
include/linux/i2c/twl.h | 25 +-
.../linux/mfd/{twl4030-codec.h => twl4030-audio.h} | 16 +-
include/linux/mfd/twl6040.h | 261 ++++++++
sound/soc/codecs/Kconfig | 3 +-
sound/soc/codecs/twl4030.c | 22 +-
sound/soc/codecs/twl6040.c | 628 ++++++++------------
sound/soc/codecs/twl6040.h | 118 ----
sound/soc/omap/sdp3430.c | 2 +-
sound/soc/omap/sdp4430.c | 2 +
sound/soc/omap/zoom2.c | 2 +-
43 files changed, 2635 insertions(+), 1775 deletions(-)
create mode 100644 arch/arm/mach-omap2/twl-common.c
create mode 100644 arch/arm/mach-omap2/twl-common.h
create mode 100644 drivers/input/misc/twl6040-vibra.c
create mode 100644 drivers/mfd/twl4030-audio.c
delete mode 100644 drivers/mfd/twl4030-codec.c
create mode 100644 drivers/mfd/twl6040-core.c
create mode 100644 drivers/mfd/twl6040-irq.c
rename include/linux/mfd/{twl4030-codec.h => twl4030-audio.h} (96%)
create mode 100644 include/linux/mfd/twl6040.h
--
1.7.5.3
next reply other threads:[~2011-06-21 14:39 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-21 13:38 Peter Ujfalusi [this message]
2011-06-21 13:38 ` [PATCH v6 01/18] OMAP: New twl-common for common TWL configuration Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 02/18] OMAP4: Move common twl6030 configuration to twl-common Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 03/18] OMAP3: Move common twl " Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 04/18] OMAP3: Move common regulator " Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 05/18] MFD: twl4030-codec: Rename internals from codec to audio Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 06/18] MFD: twl4030-codec -> twl4030-audio: Rename the driver Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 07/18] MFD: twl4030-audio: Rename platform data Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 08/18] mfd: twl6040: Add initial support Peter Ujfalusi
2011-07-04 11:48 ` Samuel Ortiz
2011-07-04 13:11 ` Péter Ujfalusi
2011-07-04 14:08 ` Péter Ujfalusi
2011-07-04 17:39 ` Samuel Ortiz
2011-07-05 9:28 ` Péter Ujfalusi
2011-07-04 12:53 ` Felipe Balbi
2011-07-04 13:09 ` Péter Ujfalusi
2011-07-04 13:27 ` Felipe Balbi
2011-06-21 13:39 ` [PATCH v6 09/18] ASoC: twl6040: Convert into TWL6040 MFD child Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 10/18] MFD: twl6040: Change platform data for soc codec driver Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 11/18] input: Add initial support for TWL6040 vibrator Peter Ujfalusi
2011-06-21 20:32 ` Dmitry Torokhov
2011-06-22 11:37 ` Péter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 12/18] OMAP4: SDP4430: Add twl6040 vibrator platform support Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 13/18] ASoC: twl6040: add all ABE DAIs Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 14/18] ASoC: twl6040: Support other sample rates in constraints Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 15/18] ASoC: twl6040: Remove pll and headset mode dependency Peter Ujfalusi
2011-06-21 17:35 ` Mark Brown
2011-06-22 11:39 ` Péter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 16/18] ASoC: twl6040: set default constraints Peter Ujfalusi
2011-06-21 13:39 ` [PATCH v6 17/18] ASoC: twl6040: Configure ramp step based on platform Peter Ujfalusi
2011-06-22 11:25 ` [PATCH v6 18/18] OMAP4: SDP4430: Add twl6040 codec platform support Peter Ujfalusi
2011-06-27 9:43 ` [PATCH v6 00/18] MFD/ASoC/Input: TWL4030/TWL60X0 changes Péter Ujfalusi
2011-06-27 10:18 ` Tony Lindgren
2011-06-27 14:30 ` Péter Ujfalusi
2011-06-28 6:17 ` Tony Lindgren
2011-06-28 6:44 ` Péter Ujfalusi
2011-06-28 6:50 ` Tony Lindgren
2011-07-04 11:51 ` Samuel Ortiz
2011-06-30 6:15 ` Re: [alsa-devel] " Péter Ujfalusi
2011-06-30 8:04 ` Samuel Ortiz
2011-06-30 9:41 ` Péter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308663556-29120-1-git-send-email-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=lrg@ti.com \
--cc=sameo@linux.intel.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®