From: Ravishankar <ravishankarkm32@gmail.com>
To: gregkh@suse.de, wfp5p@virginia.edu
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Ravishankar <ravi.shankar@greenturtles.in>,
Ravishankar <ravishankarkm32@gmail.com>
Subject: [PATCH 2/2] Staging: comedi: fix warning: line over 80 character issue in s626.c
Date: Sat, 9 Jul 2011 19:24:43 +0530 [thread overview]
Message-ID: <1310219683-26160-1-git-send-email-ravishankarkm32@gmail.com> (raw)
In-Reply-To: <[PATCH 2/2]STAGING: Comedi: fix warning: line over 80 character issue in s626.c>
From: Ravishankar <ravi.shankar@greenturtles.in>
This is a patch to the s626.c file that fixes up a warning: line over 80 character found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
---
drivers/staging/comedi/drivers/s626.c | 16 ++++++++++------
1 files changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 290d4d8..fee5faa 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -338,7 +338,8 @@ struct enc_private {
uint16_t(*GetIntSrc) (struct comedi_device *dev, struct enc_private *);
uint16_t(*GetLoadTrig) (struct comedi_device *dev, struct enc_private *); /* Return preload trigger source. */
uint16_t(*GetMode) (struct comedi_device *dev, struct enc_private *); /* Return standardized operating mode. */
- void (*PulseIndex) (struct comedi_device *dev, struct enc_private *); /* Generate soft index strobe. */
+ /* Generate soft index strobe. */
+ void (*PulseIndex) (struct comedi_device *dev, struct enc_private *);
void (*SetEnable) (struct comedi_device *dev, struct enc_private *, uint16_t enab); /* Program clock enable. */
void (*SetIntSrc) (struct comedi_device *dev, struct enc_private *, uint16_t IntSource); /* Program interrupt source. */
void (*SetLoadTrig) (struct comedi_device *dev, struct enc_private *, uint16_t Trig); /* Program preload trigger source. */
@@ -349,7 +350,8 @@ struct enc_private {
uint16_t MyCRB; /* Address of CRB register. */
uint16_t MyLatchLsw; /* Address of Latch least-significant-word */
/* register. */
- uint16_t MyEventBits[4]; /* Bit translations for IntSrc -->RDMISC2. */
+ /* Bit translations for IntSrc -->RDMISC2. */
+ uint16_t MyEventBits[4];
};
#define encpriv ((struct enc_private *)(dev->subdevices+5)->private)
@@ -784,7 +786,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* | DEBI_CFG_INCQ| DEBI_CFG_16Q); //end */
/* Paging is disabled. */
- WR7146(P_DEBIPAGE, DEBI_PAGE_DISABLE); /* Disable MMU paging. */
+ /* Disable MMU paging. */
+ WR7146(P_DEBIPAGE, DEBI_PAGE_DISABLE);
/* Init GPIO so that ADC Start* is negated. */
WR7146(P_GPIO, GPIO_BASE | GPIO1_HI);
@@ -809,8 +812,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* devpriv->I2Cards= IsBoardRevA ? 0xA8 : 0xA0; // Set I2C EEPROM */
/* DeviceType (0xA0) */
/* and DeviceAddress<<1. */
-
- devpriv->I2CAdrs = 0xA0; /* I2C device address for onboard */
+ /* I2C device address for onboard */
+ devpriv->I2CAdrs = 0xA0;
/* eeprom(revb) */
/* Issue an I2C ABORT command to halt any I2C operation in */
@@ -828,7 +831,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
for (i = 0; i < 2; i++) {
WR7146(P_I2CSTAT, I2C_CLKSEL);
/* Write I2C control: reset error flags. */
- MC_ENABLE(P_MC2, MC2_UPLD_IIC); /* Invoke command upload */
+ /* Invoke command upload */
+ MC_ENABLE(P_MC2, MC2_UPLD_IIC);
while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
;
/* and wait for upload to complete. */
--
1.6.5.2
parent reply other threads:[~2011-07-09 13:42 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <[PATCH 2/2]STAGING: Comedi: fix warning: line over 80 character issue in s626.c>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310219683-26160-1-git-send-email-ravishankarkm32@gmail.com \
--to=ravishankarkm32@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=ravi.shankar@greenturtles.in \
--cc=wfp5p@virginia.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®