* [PATCH 13/13] Staging: comedi: fix indentation issue in pcl818.c
[not found] <[PATCH 11/11]Staging: comedi:indentation error issue in pcl818.c>
@ 2011-07-11 11:30 ` Ravishankar
2011-07-11 11:28 ` Dan Carpenter
0 siblings, 1 reply; 3+ messages in thread
From: Ravishankar @ 2011-07-11 11:30 UTC (permalink / raw)
To: gregkh, wfp5p; +Cc: devel, linux-kernel, Ravishankar, Ravishankar
From: Ravishankar <ravi.shankar@greenturtles.in>
This is a patch to the pcl818.c file that fixes up a ERROR: code indent should use tabs where possible found by the checkpatch.pl tool
Signed-off-by: Ravishankar <ravishankarkm32@gmail.com>
---
drivers/staging/comedi/drivers/pcl818.c | 36 +++++++++++++++---------------
1 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 3ac489d..37dcd7c 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -45,11 +45,11 @@ A word or two about DMA. Driver support DMA operations at two ways:
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA (0=disable, 1, 3)
[3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
+ 1 = 1MHz clock for 8254
[4] - 0, 5=A/D input -5V.. +5V
- 1, 10=A/D input -10V..+10V
+ 1, 10 = A/D input - 10V..+10V
[5] - 0, 5=D/A output 0-5V (internal reference -5V)
- 1, 10=D/A output 0-10V (internal reference -10V)
+ 1, 10 = D/A output 0-10V(internal reference - 10V)
2 =D/A output unknown (external reference)
Options for PCL-818, PCL-818H:
@@ -57,9 +57,9 @@ A word or two about DMA. Driver support DMA operations at two ways:
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA (0=disable, 1, 3)
[3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
+ 1 = 1MHz clock for 8254
[4] - 0, 5=D/A output 0-5V (internal reference -5V)
- 1, 10=D/A output 0-10V (internal reference -10V)
+ 1, 10 = D/A output 0-10V(internal reference - 10V)
2 =D/A output unknown (external reference)
Options for PCL-818HD, PCL-818HG:
@@ -68,33 +68,33 @@ A word or two about DMA. Driver support DMA operations at two ways:
[2] - DMA/FIFO (-1=use FIFO, 0=disable both FIFO and DMA,
1=use DMA ch 1, 3=use DMA ch 3)
[3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
+ 1 = 1MHz clock for 8254
[4] - 0, 5=D/A output 0-5V (internal reference -5V)
- 1, 10=D/A output 0-10V (internal reference -10V)
- 2 =D/A output unknown (external reference)
+ 1, 10 = D/A output 0-10V (internal reference - 10V)
+ 2 =D/A output unknown (external reference)
Options for PCL-718:
[0] - IO Base
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA (0=disable, 1, 3)
[3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
+ 1= 1MHz clock for 8254
[4] - 0=A/D Range is +/-10V
1= +/-5V
2= +/-2.5V
3= +/-1V
4= +/-0.5V
- 5= user defined bipolar
+ 5= user defined bipolar
6= 0-10V
7= 0-5V
- 8= 0-2V
+ 8= 0-2V
9= 0-1V
10= user defined unipolar
[5] - 0, 5=D/A outputs 0-5V (internal reference -5V)
- 1, 10=D/A outputs 0-10V (internal reference -10V)
+ 1, 10=D/A outputs 0-10V (internal reference -10V)
2=D/A outputs unknown (external reference)
[6] - 0, 60=max 60kHz A/D sampling
- 1,100=max 100kHz A/D sampling (PCL-718 with Option 001 installed)
+ 1, 100=max 100kHz A/D sampling (PCL - 718 with Option 001 installed)
*/
@@ -190,7 +190,7 @@ A word or two about DMA. Driver support DMA operations at two ways:
#define INT_TYPE_AI1_DMA_RTC 9
#define INT_TYPE_AI3_DMA_RTC 10
-#define RTC_IRQ 8
+#define RTC_IRQ 8
#define RTC_IO_EXTENT 0x10
#endif
@@ -242,8 +242,8 @@ static const struct comedi_lrange range_pcl818l_h_ai = { 4, {
};
static const struct comedi_lrange range718_bipolar1 = { 1, {BIP_RANGE(1),} };
-static const struct comedi_lrange range718_bipolar0_5 =
- { 1, {BIP_RANGE(0.5),} };
+static const struct comedi_lrange range718_bipolar0_5 = { 1,
+{BIP_RANGE(0.5),} };
static const struct comedi_lrange range718_unipolar2 = { 1, {UNI_RANGE(2),} };
static const struct comedi_lrange range718_unipolar1 = { 1, {BIP_RANGE(1),} };
@@ -252,8 +252,8 @@ static int pcl818_attach(struct comedi_device *dev,
static int pcl818_detach(struct comedi_device *dev);
#ifdef unused
-static int RTC_lock = 0; /* RTC lock */
-static int RTC_timer_lock = 0; /* RTC int lock */
+static int RTC_lock; /* RTC lock */
+static int RTC_timer_lock; /* RTC int lock */
#endif
struct pcl818_board {
--
1.6.5.2
^ permalink raw reply [flat|nested] 3+ messages in thread