mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] ACPI, APEI, GHES: Add PCIe AER recovery support
@ 2011-08-31  6:36 Huang Ying
  0 siblings, 0 replies; only message in thread
From: Huang Ying @ 2011-08-31  6:36 UTC (permalink / raw)
  To: Len Brown; +Cc: linux-kernel, Tony Luck, ying.huang, linux-acpi

aer_recover_queue() is called when recoverable PCIe AER errors are
notified by firmware to do the recovery work.

Signed-off-by: Huang Ying <ying.huang@intel.com>
---
 drivers/acpi/apei/ghes.c |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -45,6 +45,8 @@
 #include <linux/irq_work.h>
 #include <linux/llist.h>
 #include <linux/genalloc.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
 #include <acpi/apei.h>
 #include <acpi/atomicio.h>
 #include <acpi/hed.h>
@@ -475,6 +477,27 @@ static void ghes_do_proc(const struct ac
 			}
 #endif
 		}
+#ifdef CONFIG_ACPI_APEI_PCIEAER
+		else if (!uuid_le_cmp(*(uuid_le *)gdata->section_type,
+				      CPER_SEC_PCIE)) {
+			struct cper_sec_pcie *pcie_err;
+			pcie_err = (struct cper_sec_pcie *)(gdata+1);
+			if (sev == GHES_SEV_RECOVERABLE &&
+			    sec_sev == GHES_SEV_RECOVERABLE &&
+			    pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
+			    pcie_err->validation_bits & CPER_PCIE_VALID_AER_INFO) {
+				unsigned int devfn;
+				int aer_severity;
+				devfn = PCI_DEVFN(pcie_err->device_id.device,
+						  pcie_err->device_id.function);
+				aer_severity = cper_severity_to_aer(sev);
+				aer_recover_queue(pcie_err->device_id.segment,
+						  pcie_err->device_id.bus,
+						  devfn, aer_severity);
+			}
+
+		}
+#endif
 	}
 }
 

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2011-08-31  6:36 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-31  6:36 [PATCH] ACPI, APEI, GHES: Add PCIe AER recovery support Huang Ying

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®