* [PATCH 2/4] staging: et131x: Remove error path from suspend/resume code
@ 2011-10-07 21:52 Mark Einon
2011-10-07 21:52 ` [PATCH 3/4] staging: et131x: Move pm calls from pci device to driver device Mark Einon
0 siblings, 1 reply; 2+ messages in thread
From: Mark Einon @ 2011-10-07 21:52 UTC (permalink / raw)
To: gregkh; +Cc: romieu, rjw, devel, linux-kernel, Mark Einon
Removing an error path from et131x suspend/resume functions.
Also added a call to phy_stop() to complement the phy_start() call
during device start/stop routine.
Thanks to Francois Romieu <romieu@fr.zoreil.com> for pointing this out.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
---
drivers/staging/et131x/et131x.h | 2 +
drivers/staging/et131x/et131x_initpci.c | 35 +++++++++-----------------
drivers/staging/et131x/et131x_netdev.c | 40 ++++++++++++++++++++++++-------
3 files changed, 45 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/et131x/et131x.h b/drivers/staging/et131x/et131x.h
index c8f5ab1..e832234 100644
--- a/drivers/staging/et131x/et131x.h
+++ b/drivers/staging/et131x/et131x.h
@@ -85,6 +85,8 @@ void et1310_setup_device_for_unicast(struct et131x_adapter *adapter);
/* et131x_netdev.c */
int et131x_open(struct net_device *netdev);
int et131x_close(struct net_device *netdev);
+void et131x_up(struct net_device *netdev);
+void et131x_down(struct net_device *netdev);
struct net_device *et131x_device_alloc(void);
void et131x_enable_txrx(struct net_device *netdev);
void et131x_disable_txrx(struct net_device *netdev);
diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c
index 9795310..95a1aff 100644
--- a/drivers/staging/et131x/et131x_initpci.c
+++ b/drivers/staging/et131x/et131x_initpci.c
@@ -874,14 +874,12 @@ static int et131x_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
- if (!netif_running(netdev))
- return 0;
-
- et131x_close(netdev);
- netif_device_detach(netdev);
-
- pci_save_state(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ if (netif_running(netdev)) {
+ netif_device_detach(netdev);
+ et131x_down(netdev);
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ }
return 0;
}
@@ -889,24 +887,15 @@ static int et131x_pci_suspend(struct pci_dev *pdev, pm_message_t state)
static int et131x_pci_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
- int err = 0;
- if (!netif_running(netdev))
- return 0;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
-
- err = et131x_open(netdev);
- if (err) {
- dev_err(&pdev->dev, "Can't resume interface!\n");
- goto out;
+ if (netif_running(netdev)) {
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ et131x_up(netdev);
+ netif_device_attach(netdev);
}
- netif_device_attach(netdev);
-
-out:
- return err;
+ return 0;
}
static struct pci_device_id et131x_pci_table[] __devinitdata = {
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index 79127de..16373bb 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -178,6 +178,18 @@ void et131x_disable_txrx(struct net_device *netdev)
}
/**
+ * et131x_up - Bring up a device for use.
+ * @netdev: device to be opened
+ */
+void et131x_up(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ et131x_enable_txrx(netdev);
+ phy_start(adapter->phydev);
+}
+
+/**
* et131x_open - Open the device for use.
* @netdev: device to be opened
*
@@ -205,13 +217,28 @@ int et131x_open(struct net_device *netdev)
}
adapter->flags |= fMP_ADAPTER_INTERRUPT_IN_USE;
- et131x_enable_txrx(netdev);
- phy_start(adapter->phydev);
+
+ et131x_up(netdev);
return result;
}
/**
+ * et131x_down - Bring down the device
+ * @netdev: device to be broght down
+ */
+void et131x_down(struct net_device *netdev)
+{
+ struct et131x_adapter *adapter = netdev_priv(netdev);
+
+ /* Save the timestamp for the TX watchdog, prevent a timeout */
+ netdev->trans_start = jiffies;
+
+ phy_stop(adapter->phydev);
+ et131x_disable_txrx(netdev);
+}
+
+/**
* et131x_close - Close the device
* @netdev: device to be closed
*
@@ -221,18 +248,13 @@ int et131x_close(struct net_device *netdev)
{
struct et131x_adapter *adapter = netdev_priv(netdev);
- /* Save the timestamp for the TX watchdog, prevent a timeout */
- netdev->trans_start = jiffies;
-
- et131x_disable_txrx(netdev);
+ et131x_down(netdev);
- /* Deregistering ISR */
adapter->flags &= ~fMP_ADAPTER_INTERRUPT_IN_USE;
free_irq(netdev->irq, netdev);
/* Stop the error timer */
- del_timer_sync(&adapter->error_timer);
- return 0;
+ return del_timer_sync(&adapter->error_timer);
}
/**
--
1.7.6.4
^ permalink raw reply [flat|nested] 2+ messages in thread
* [PATCH 3/4] staging: et131x: Move pm calls from pci device to driver device
2011-10-07 21:52 [PATCH 2/4] staging: et131x: Remove error path from suspend/resume code Mark Einon
@ 2011-10-07 21:52 ` Mark Einon
0 siblings, 0 replies; 2+ messages in thread
From: Mark Einon @ 2011-10-07 21:52 UTC (permalink / raw)
To: gregkh; +Cc: romieu, rjw, devel, linux-kernel, Mark Einon
Move the pci driver suspend/resume calls up to the driver.pm ops
structure, as they are not pci device specific.
Thanks to Francois Romieu <romieu@fr.zoreil.com> for pointing this out.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
---
drivers/staging/et131x/et131x_initpci.c | 20 ++++++++++++--------
1 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c
index 95a1aff..2f03ba0 100644
--- a/drivers/staging/et131x/et131x_initpci.c
+++ b/drivers/staging/et131x/et131x_initpci.c
@@ -870,26 +870,27 @@ static void __devexit et131x_pci_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
}
-static int et131x_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int et131x_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
if (netif_running(netdev)) {
netif_device_detach(netdev);
et131x_down(netdev);
pci_save_state(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
}
return 0;
}
-static int et131x_pci_resume(struct pci_dev *pdev)
+static int et131x_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
if (netif_running(netdev)) {
- pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
et131x_up(netdev);
netif_device_attach(netdev);
@@ -898,6 +899,12 @@ static int et131x_pci_resume(struct pci_dev *pdev)
return 0;
}
+static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume);
+#define ET131X_PM_OPS (&et131x_pm_ops)
+#else
+#define ET131X_PM_OPS NULL
+#endif
+
static struct pci_device_id et131x_pci_table[] __devinitdata = {
{ET131X_PCI_VENDOR_ID, ET131X_PCI_DEVICE_ID_GIG, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0UL},
@@ -913,10 +920,7 @@ static struct pci_driver et131x_driver = {
.id_table = et131x_pci_table,
.probe = et131x_pci_setup,
.remove = __devexit_p(et131x_pci_remove),
-#ifdef CONFIG_PM
- .suspend = et131x_pci_suspend,
- .resume = et131x_pci_resume,
-#endif
+ .driver.pm = ET131X_PM_OPS,
};
/**
--
1.7.6.4
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-10-07 21:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-10-07 21:52 [PATCH 2/4] staging: et131x: Remove error path from suspend/resume code Mark Einon
2011-10-07 21:52 ` [PATCH 3/4] staging: et131x: Move pm calls from pci device to driver device Mark Einon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®