[PATCHv2 1/7] input/cma3000_d0x: Support devices without pdata

[Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>]

Architectures based on device-tree does not have platform data
associated to the spi/i2c devices.
This patch allows those architectures to use the cma3000 driver with
a default configuration.

---

v2: Fixes suggested by Jonathan Cameron
    -Spelling
    -Simplify pdata!=NULL check

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
 drivers/input/misc/cma3000_d0x.c |   20 +++++++++++++++-----
 1 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
index 1633b63..f2e87e3 100644
--- a/drivers/input/misc/cma3000_d0x.c
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -62,6 +62,18 @@
 #define BIT_TO_2G  18
 #define BIT_TO_8G  71
 
+static struct cma3000_platform_data cma3000_default_pdata = {
+	.mdthr = 0x8,
+	.mdfftmr = 0x33,
+	.ffthr = 0x8,
+	.mode = CMAMODE_MEAS400,
+	.g_range = CMARANGE_2G,
+	.fuzz_x = BIT_TO_2G,
+	.fuzz_y = BIT_TO_2G,
+	.fuzz_z = BIT_TO_2G,
+	.irqflags = 0,
+};
+
 struct cma3000_accl_data {
 	const struct cma3000_bus_ops *bus_ops;
 	const struct cma3000_platform_data *pdata;
@@ -289,13 +301,11 @@ struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
 	int rev;
 	int error;
 
-	if (!pdata) {
-		dev_err(dev, "platform data not found\n");
-		error = -EINVAL;
-		goto err_out;
+	if (pdata == NULL) {
+		dev_info(dev, "platform data not found, using default\n");
+		pdata = &cma3000_default_pdata;
 	}
 
-
 	/* if no IRQ return error */
 	if (irq == 0) {
 		error = -EINVAL;
-- 
1.7.7