Re: [PATCH v4 0/5] Add driver for EC found on Qualcomm reference devices

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

On 13/03/2026 10:29, Anvesh Jain P wrote:
> From: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
> 
> Add Embedded controller driver support for Hamoa/Purwa/Glymur Qualcomm
> reference boards. It handles fan control, temperature sensors, access
> to EC state changes and supports reporting suspend entry/exit to the EC.
> 
> ---
> Changes in v4:
>    - Fix fan count calculation to use min() instead of max() to correctly
>      cap fan_cnt at EC_MAX_FAN_CNT.
>    - Remove unnecessary mutex lock/unlock.
>    - Disable fan debug mode on ec module removal.
>    - Fix issue reported by kernel test robot.
>    - Consolidate hamoa-iot-evk specific changes into hamoa-iot-evk.dts.
>    - Add board-specific compatible strings as per review comments.
>    - Link to v3: https://lore.kernel.org/all/20260308233646.2318676-1-sibi.sankar@oss.qualcomm.com/
> 
> Changes in v3:
>    - Revamp the bindings and driver to support generic ec specification
>      that works across Qualcomm Hamoa/Purwa and Glymur reference devices.
>    - Add ec nodes to Hamoa/Purwa CRDs and IOT-EVKs.
>    - Add ec node to Glymur CRDs.
>    - Link to v2: https://lore.kernel.org/lkml/20241219200821.8328-1-maccraft123mc@gmail.com/
>    - Link to v1: https://lore.kernel.org/lkml/20240927185345.3680-1-maccraft123mc@gmail.com/
> 
> ---
> Maya Matuszczyk (1):
>        dt-bindings: embedded-controller: Add EC bindings for Qualcomm reference devices
> 
> Sibi Sankar (4):
>        platform: arm64: Add driver for EC found on Qualcomm reference devices
>        arm64: dts: qcom: glymur-crd: Add Embedded controller node
>        arm64: dts: qcom: x1-crd: Add Embedded controller node
>        arm64: dts: qcom: hamoa-iot-evk: Add Embedded controller node
> 
>   .../embedded-controller/qcom,hamoa-ec.yaml         |  56 +++
>   MAINTAINERS                                        |   8 +
>   arch/arm64/boot/dts/qcom/glymur-crd.dts            |  22 +
>   arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts         |  16 +
>   arch/arm64/boot/dts/qcom/x1-crd.dtsi               |  16 +
>   drivers/platform/arm64/Kconfig                     |  12 +
>   drivers/platform/arm64/Makefile                    |   1 +
>   drivers/platform/arm64/qcom-hamoa-ec.c             | 468 +++++++++++++++++++++
>   8 files changed, 599 insertions(+)
> ---
> base-commit: a0ae2a256046c0c5d3778d1a194ff2e171f16e5f
> change-id: 20260309-v04-add-driver-for-ec-3fa478f264d9
> 
> Best regards,


echo 'file qcom-hamoa-ec.c +p' > /sys/kernel/debug/dynamic_debug/control
echo 6-0076 > /sys/bus/i2c/drivers/qcom-hamoa-ec/unbind
echo 6-0076 > /sys/bus/i2c/drivers/qcom-hamoa-ec/bind
dmesg | tail -n 15

[   27.301126] qcom-hamoa-ec 6-0076: EC Version 0.35.0
[   27.311768] qcom-hamoa-ec 6-0076: Fan count: 0 Fan Type: 0 Thermistor 
Mask: 0

?

---
bod