From: Peter De Schrijver <pdeschrijver@nvidia.com>
To: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Grant Likely <grant.likely@secretlab.ca>,
Rob Herring <rob.herring@calxeda.com>,
Randy Dunlap <rdunlap@xenotime.net>,
Russell King <linux@arm.linux.org.uk>,
Colin Cross <ccross@android.com>, Olof Johansson <olof@lixom.net>,
Stephen Warren <swarren@nvidia.com>,
<devicetree-discuss@lists.ozlabs.org>,
<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-tegra@vger.kernel.org>
Subject: [PATCH 03/10] arm/tegra: prepare clock code for multiple tegra variants
Date: Thu, 17 Nov 2011 18:19:17 +0200 [thread overview]
Message-ID: <1321546766-26770-4-git-send-email-pdeschrijver@nvidia.com> (raw)
In-Reply-To: <1321546766-26770-1-git-send-email-pdeschrijver@nvidia.com>
Rework the tegra20 clock code to support multiple tegra variants :
* remove tegra2_periph_reset_assert/tegra2_periph_reset_deassert. This
functionality should be in clock.c.
* compile tegra_sdmmc_tap_delay only on tegra20 as this feature will not
be available in future variants.
* don't export clk_measure_input_freq as its functionality is also available
using clk_get_rate().
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
arch/arm/mach-tegra/clock.c | 14 +++++++++-----
arch/arm/mach-tegra/clock.h | 3 ---
arch/arm/mach-tegra/tegra2_clocks.c | 14 +-------------
arch/arm/mach-tegra/timer.c | 12 ++++++++----
4 files changed, 18 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index f8d41ff..47f6366 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -387,13 +387,15 @@ EXPORT_SYMBOL(tegra_clk_init_from_table);
void tegra_periph_reset_deassert(struct clk *c)
{
- tegra2_periph_reset_deassert(c);
+ BUG_ON(!c->ops->reset);
+ c->ops->reset(c, false);
}
EXPORT_SYMBOL(tegra_periph_reset_deassert);
void tegra_periph_reset_assert(struct clk *c)
{
- tegra2_periph_reset_assert(c);
+ BUG_ON(!c->ops->reset);
+ c->ops->reset(c, true);
}
EXPORT_SYMBOL(tegra_periph_reset_assert);
@@ -403,10 +405,11 @@ void __init tegra_init_clock(void)
}
/*
- * The SDMMC controllers have extra bits in the clock source register that
- * adjust the delay between the clock and data to compenstate for delays
- * on the PCB.
+ * The SDMMC controllers on tegra20 have extra bits in the clock source
+ * register that adjust the delay between the clock and data to compenstate
+ * for delays on the PCB.
*/
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void tegra_sdmmc_tap_delay(struct clk *c, int delay)
{
unsigned long flags;
@@ -415,6 +418,7 @@ void tegra_sdmmc_tap_delay(struct clk *c, int delay)
tegra2_sdmmc_tap_delay(c, delay);
spin_unlock_irqrestore(&c->spinlock, flags);
}
+#endif
#ifdef CONFIG_DEBUG_FS
diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h
index 688316a..18df129 100644
--- a/arch/arm/mach-tegra/clock.h
+++ b/arch/arm/mach-tegra/clock.h
@@ -146,11 +146,8 @@ struct tegra_clk_init_table {
};
void tegra2_init_clocks(void);
-void tegra2_periph_reset_deassert(struct clk *c);
-void tegra2_periph_reset_assert(struct clk *c);
void clk_init(struct clk *clk);
struct clk *tegra_get_clock_by_name(const char *name);
-unsigned long clk_measure_input_freq(void);
int clk_reparent(struct clk *c, struct clk *parent);
void tegra_clk_init_from_table(struct tegra_clk_init_table *table);
unsigned long clk_get_rate_locked(struct clk *c);
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 371869d..2ab18f6 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -174,7 +174,7 @@ static int tegra_periph_clk_enable_refcount[3 * 32];
#define pmc_readl(reg) \
__raw_readl(reg_pmc_base + (reg))
-unsigned long clk_measure_input_freq(void)
+static unsigned long clk_measure_input_freq(void)
{
u32 clock_autodetect;
clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
@@ -278,18 +278,6 @@ static struct clk_ops tegra_clk_m_ops = {
.disable = tegra2_clk_m_disable,
};
-void tegra2_periph_reset_assert(struct clk *c)
-{
- BUG_ON(!c->ops->reset);
- c->ops->reset(c, true);
-}
-
-void tegra2_periph_reset_deassert(struct clk *c)
-{
- BUG_ON(!c->ops->reset);
- c->ops->reset(c, false);
-}
-
/* super clock functions */
/* "super clocks" on tegra have two-stage muxes and a clock skipping
* super divider. We will ignore the clock skipping divider, since we
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 2f1df47..6366654 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -182,14 +182,18 @@ static struct irqaction tegra_timer_irq = {
static void __init tegra_init_timer(void)
{
struct clk *clk;
- unsigned long rate = clk_measure_input_freq();
+ unsigned long rate;
int ret;
clk = clk_get_sys("timer", NULL);
- if (IS_ERR(clk))
- pr_warn("Unable to get timer clock\n");
- else
+ if (IS_ERR(clk)) {
+ pr_warn("Unable to get timer clock."
+ " Assuming 12Mhz input clock.\n");
+ rate = 12000000;
+ } else {
clk_enable(clk);
+ rate = clk_get_rate(clk);
+ }
/*
* rtc registers are used by read_persistent_clock, keep the rtc clock
--
1.7.7.rc0.72.g4b5ea.dirty
next prev parent reply other threads:[~2011-11-17 16:24 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-17 16:19 [PATCH v5 00/10] Add support for tegra30 and cardhu Peter De Schrijver
2011-11-17 16:19 ` [PATCH 01/10] arm/tegra: initial device tree for tegra30 Peter De Schrijver
2011-11-17 19:39 ` Stephen Warren
2011-11-18 18:49 ` Olof Johansson
2011-11-18 19:30 ` Rob Herring
2011-11-18 21:48 ` Olof Johansson
2011-11-18 22:03 ` Rob Herring
2011-11-17 16:19 ` [PATCH 02/10] arm/tegra: cleanup tegra20 support Peter De Schrijver
2011-11-17 16:19 ` Peter De Schrijver [this message]
2011-11-18 19:06 ` [PATCH 03/10] arm/tegra: prepare clock code for multiple tegra variants Olof Johansson
2011-11-18 20:18 ` Stephen Warren
2011-11-18 21:25 ` Olof Johansson
2011-11-18 21:38 ` Stephen Warren
2011-11-21 12:44 ` Peter De Schrijver
2011-11-17 16:19 ` [PATCH 04/10] arm/tegra: prepare early init " Peter De Schrijver
2011-11-17 16:55 ` Russell King - ARM Linux
2011-11-17 16:19 ` [PATCH 05/10] arm/tegra: rename tegra20 pinmux files Peter De Schrijver
2011-11-17 16:19 ` [PATCH 06/10] arm/tegra: prepare pinmux code for multiple tegra variants Peter De Schrijver
2011-11-18 21:41 ` Olof Johansson
2011-11-21 14:29 ` Peter De Schrijver
2011-11-21 17:24 ` Stephen Warren
2011-11-22 19:01 ` Olof Johansson
2011-11-23 3:22 ` Peter De Schrijver
2011-11-17 16:19 ` [PATCH 07/10] arm/tegra: add new fields to struct tegra_pingroup_desc Peter De Schrijver
2011-11-17 16:19 ` [PATCH 08/10] arm/tegra: pinmux tables and definitions for tegra30 Peter De Schrijver
2011-11-18 21:43 ` Olof Johansson
2011-11-18 21:51 ` Stephen Warren
2011-11-18 21:56 ` Olof Johansson
2011-11-17 16:19 ` [PATCH 09/10] arm/tegra: implement support " Peter De Schrijver
2011-11-17 19:50 ` Stephen Warren
2011-11-17 16:19 ` [PATCH 10/10] arm/tegra: add support for tegra30 based board cardhu Peter De Schrijver
2011-11-17 16:49 ` [PATCH v5 00/10] Add support for tegra30 and cardhu Peter De Schrijver
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321546766-26770-4-git-send-email-pdeschrijver@nvidia.com \
--to=pdeschrijver@nvidia.com \
--cc=ccross@android.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=olof@lixom.net \
--cc=rdunlap@xenotime.net \
--cc=rob.herring@calxeda.com \
--cc=swarren@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®