From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: patches@opensource.wolfsonmicro.com,
linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/8] mfd: Add basic device tree binding for wm8994
Date: Mon, 28 Nov 2011 22:44:28 +0000 [thread overview]
Message-ID: <1322520274-13789-2-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1322520274-13789-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Add a placeholder device tree binding for the wm8994 driver. At present
the binding is essentially null as none of the platform data is supported,
and at least some of that will depend on the pending regulator bindings.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
Documentation/devicetree/bindings/sound/wm8994.txt | 18 ++++++++++++++++++
drivers/mfd/wm8994-core.c | 9 +++++++++
2 files changed, 27 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/wm8994.txt
diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
new file mode 100644
index 0000000..7a7eb1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8994.txt
@@ -0,0 +1,18 @@
+WM1811/WM8994/WM8958 audio CODEC
+
+These devices support both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm1811", "wlf,wm8994", "wlf,wm8958"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8994@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+};
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 5d6ba13..74d4746 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -581,6 +581,14 @@ static void wm8994_device_exit(struct wm8994 *wm8994)
kfree(wm8994);
}
+static const struct of_device_id wm8994_of_match[] = {
+ { .compatible = "wlf,wm1811", },
+ { .compatible = "wlf,wm8994", },
+ { .compatible = "wlf,wm8958", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, wm8994_of_match);
+
static int wm8994_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -633,6 +641,7 @@ static struct i2c_driver wm8994_i2c_driver = {
.name = "wm8994",
.owner = THIS_MODULE,
.pm = &wm8994_pm_ops,
+ .of_match_table = wm8994_of_match,
},
.probe = wm8994_i2c_probe,
.remove = wm8994_i2c_remove,
--
1.7.7.3
next prev parent reply other threads:[~2011-11-28 22:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-28 22:40 [PATCH 0/8] WM8994 MFD updates for 3.3 Mark Brown
2011-11-28 22:44 ` [PATCH 1/8] mfd: Remove some unused functions in wm8894-irq Mark Brown
2011-11-28 22:44 ` Mark Brown [this message]
2011-11-28 22:44 ` [PATCH 3/8] mfd: Convert wm8994 to devm_kzalloc() Mark Brown
2011-11-28 22:44 ` [PATCH 4/8] mfd: Disable more pulls on WM8994 Mark Brown
2011-11-28 22:44 ` [PATCH 5/8] mfd: Don't hard code the reset value for WM8994 devices Mark Brown
2011-11-28 22:44 ` [PATCH 6/8] mfd: Define some additional wm8994 registers Mark Brown
2011-11-28 22:44 ` [PATCH 7/8] mfd: Add wm8994 register access and default information Mark Brown
2011-11-28 22:44 ` [PATCH 8/8] mfd: Enable register cache for wm8994 devices Mark Brown
2011-11-28 22:58 ` Mark Brown
2011-11-28 22:47 ` [PATCH] mfd: Convert wm8994 to use generic regmap irq_chip Mark Brown
2011-12-12 14:34 ` [PATCH 0/8] WM8994 MFD updates for 3.3 Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1322520274-13789-2-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome